Homework Answers
Add Answer to:
!~.KA rad - 9 TECHNOLOGICAL INSTITUTE OF PACHUCA MECHANICAL ENGINEERING PARTIAL TEST HEAT TRANSFER 13 th...
A wall panel is insulated on the back and exposed to solar radiation on the front...
A wall panel is insulated on the back and exposed to solar radiation on the front surface. The exposed surface of the plate has an absorptivity α = 0.8 for radiation (i.e. 80% of radiant energy is absorbed). Solar radiation arrives to the panel at a rate of 1 kW⁄m2. The panel emissivity ϵ = 1 and the surrounding air temperature is 25°C. a. If we assume radiation is the only mechanism of heat transfer, in this scenario determine the...
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate...
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate per unit length of the tube due to free convection. 2) Air at -10°C flows at 10 m/s over the roof plate of two 5m length rooms whose air is at Too-200C. The roof plate is 0.20-m thick concrete (k = 0.6 w/ m. K)....
table A-13 heat transfer book Consider a thin plate of 20 cm by 20 cm is...
table A-13 heat transfer book
Consider a thin plate of 20 cm by 20 cm is standing vertically in air. One side of the plate is insulated. The plate surface temperature is 50°C. The room air temperature where the plate is located is 20'C. Determine: (a) Is the flow laminar or turbulent? (b) What Nu number correlation will you use to find h? Find Nu. (C) Find the convection heat transfer coefficient (h) (d) Find the rate of convection heat...
Problem 1 (25 points) In an experiment to measure heat transfer coefficients, a very thin foil...
Problem 1 (25 points) In an experiment to measure heat transfer coefficients, a very thin foil of low emissivi attached to a slab of material with low thermal conductivity. The other surface of the metal foil is exposed to convection heat transfer by fluid flowing over the foil surface. The slab on which the metal foil is attached has a thickness of 30 mm and a thermal conductivity of 0.023 W/m K in a condition where the surrounding room temperature...
The heat that is conducted through a body must frequently be removed by other heat transfer...
The heat that is conducted through a body must frequently be removed by other heat transfer processes. For example, the heat generated in an electronic device must be dissipated to the surroundings through convection by means of fins. Consider the one-dimensional aluminum fin (thickness t 3.0 mm, width 20 cm, length L) shown in Figure 1, that is exposed to a surrounding fluid at a temperature T. The conductivity of the aluminum fin (k) and coefficient of heat convection of...
The rate of heat transfer by emitted radiation is determined by the Stefan-Boltzmann law of radiation...
The rate of heat transfer by emitted radiation is determined by the Stefan-Boltzmann law of radiation = ceAT4 t where a 5.67x108 J/(s m2. K4) is the Stefan-Boltzmann constant, A is the surface area of the object, and T is its absolute temperature in kelvin. The symbol e stands for the emissivity of the object, which is a measure of how well it radiates. An ideal jet-black (or black body) radiator has e 1, whereas a perfect reflector has e...
Radiation heat transfer: Two perfectly black surfaces (each with emissivity ε = 1.0) are constructed such...
Radiation heat transfer: Two perfectly black surfaces (each with emissivity ε = 1.0) are constructed such that all the radiant energy leaving a surface at 800 °C (1073 K) reaches the other surface. The temperature of the other surface, with area A = 2 m2, is maintained at 250 °C (523 K). Using the formula Q = ε σ A (THot4 – TCold4) calculate the heat transfer (in kW) of the surface maintained at 800 °C. The Stefan-Boltzmann constant, σ...
In a manufacturing process, a transparent film is being bonded to a substrate as shown in...
In a manufacturing process, a transparent film is being bonded to a substrate as shown in the sketch, where Lj = 0.8 mm, with an associated k, =0.025 W/m-K and Ly =1.0 mm with an associated ks =0.05 W/m-K. To cure the bond at a temperature To, a radiant source is used to provide a heat flux d" (W/m2), all of which is absorbed at the bonded surface. The back of the substrate is maintained at T while the free...
An aluminum plate with a thickness of L=5 mm is mounted in a horizontal position, and...
An aluminum plate with a thickness of L=5 mm is mounted in a horizontal position, and its bottom surface is well insulated. A special, thin coating (with emissivity and solar absorptivity of 0.25) is applied to the top surface. The density ρ and specific heat c of aluminum are known to be 2700 kg/m3 and 900 J/kg · K, respectively. Consider conditions for which the plate is initially at a temperature of ??????=25 °C and its top surface is suddenly...
(13) A brewery fermentation tank 12 m in diameter is situated in a room, which has...
(13) A brewery fermentation tank 12 m in diameter is situated in a room, which has a temperature of 15°C. The tank is constructed of 10-mm welded steel plate with 12-mm glass lining. The temperature at the inner surface of the glass lining is 50°C. Assume that the convective resistance offered by the air film on the outside of the tank equals the combined resistance of the glass and steel. The thermal conductivity of glass is 0.80 W/mK and that...
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate per unit length of the tube due to free convection. 2) Air at -10°C flows at 10 m/s over the roof plate of two 5m length rooms whose air is at Too-200C. The roof plate is 0.20-m thick concrete (k = 0.6 w/ m. K)....
table A-13 heat transfer book
Consider a thin plate of 20 cm by 20 cm is standing vertically in air. One side of the plate is insulated. The plate surface temperature is 50°C. The room air temperature where the plate is located is 20'C. Determine: (a) Is the flow laminar or turbulent? (b) What Nu number correlation will you use to find h? Find Nu. (C) Find the convection heat transfer coefficient (h) (d) Find the rate of convection heat...
Problem 1 (25 points) In an experiment to measure heat transfer coefficients, a very thin foil of low emissivi attached to a slab of material with low thermal conductivity. The other surface of the metal foil is exposed to convection heat transfer by fluid flowing over the foil surface. The slab on which the metal foil is attached has a thickness of 30 mm and a thermal conductivity of 0.023 W/m K in a condition where the surrounding room temperature...
The heat that is conducted through a body must frequently be removed by other heat transfer processes. For example, the heat generated in an electronic device must be dissipated to the surroundings through convection by means of fins. Consider the one-dimensional aluminum fin (thickness t 3.0 mm, width 20 cm, length L) shown in Figure 1, that is exposed to a surrounding fluid at a temperature T. The conductivity of the aluminum fin (k) and coefficient of heat convection of...
The rate of heat transfer by emitted radiation is determined by the Stefan-Boltzmann law of radiation = ceAT4 t where a 5.67x108 J/(s m2. K4) is the Stefan-Boltzmann constant, A is the surface area of the object, and T is its absolute temperature in kelvin. The symbol e stands for the emissivity of the object, which is a measure of how well it radiates. An ideal jet-black (or black body) radiator has e 1, whereas a perfect reflector has e...
In a manufacturing process, a transparent film is being bonded to a substrate as shown in the sketch, where Lj = 0.8 mm, with an associated k, =0.025 W/m-K and Ly =1.0 mm with an associated ks =0.05 W/m-K. To cure the bond at a temperature To, a radiant source is used to provide a heat flux d" (W/m2), all of which is absorbed at the bonded surface. The back of the substrate is maintained at T while the free...
(13) A brewery fermentation tank 12 m in diameter is situated in a room, which has a temperature of 15°C. The tank is constructed of 10-mm welded steel plate with 12-mm glass lining. The temperature at the inner surface of the glass lining is 50°C. Assume that the convective resistance offered by the air film on the outside of the tank equals the combined resistance of the glass and steel. The thermal conductivity of glass is 0.80 W/mK and that...
Most questions answered within 3 hours.
-
Write a program to solve the Josephus problem, with the following
modification:
Sample Input:
./a.out n...
asked 8 minutes ago -
At the start of a CD it is spinning at a rate of 525 rpm
(revolutions...
asked 44 minutes ago -
4. Without doing any calculations, predict whether the observed
∆T would increase, decrease or remain the...
asked 1 hour ago -
Based on the range, which of the following sets of scores has
the greatest variability? 3,...
asked 3 hours ago -
Ripples in a pond travel at a velocity of 3 m/s with one peak
passing a...
asked 2 hours ago -
A man stands on the roof of a building of height 13.0 mm and
throws a...
asked 3 hours ago -
The extent to which assets are financed by borrowed funds and
other liabilities is indicated by:...
asked 4 hours ago -
Explain in detail
Germany is the fifth largest economy
explain what goods and services Germany specializes...
asked 4 hours ago -
The density of platinum is 21.45 g/mL. If a cube of platinum
with a mass of...
asked 4 hours ago -
Accounts Receivable
Sales
A/R Posting
Extended Sales Invoice
Packing Slip
Compare invoice to packing slip 2...
asked 4 hours ago -
Michaella, age 23, is a full-time law student and is claimed by
her parents as a...
asked 4 hours ago -
Why are polymers not typically casted into products?
asked 4 hours ago