6.1. Propylene oxide (C,H,O is produced by reacting propylene (C,H) with oxygen and hydrogen. A side...
5) The most conventional method for producing propylene oxide is by the reaction of propylene with Hz and O2. However, propane is also produced from a competing reaction of propylene with Hz. If you mix a stream contains propylene, hydrogen and air (6, 18.6 and 27 mol/h, respectively) with an inert carbon dioxide (3000 mol/h) stream and fed them to a continuous reactor. The reactor effluents introduced to a condenser where the condensate liquids consisting propylene oxide, propylene and propane...
Propane is catalytically dehydrogenated to produce propylene by passing it over a granuar solid catalyst. In parallel with the main gas-phase reaction of propane dehydrogenation, side reaction to methane and carbon occurs: C,H,C,H +H A single-pass conversion of propane of 80%Is achieved in the reactor. Out of the propane reacting, 20% reacts according to the side reaction. The reactor effluent gases undergo a two-stage separation. In the first stage all hydrogen and 90% of the methane is separated, in the...
1. Acrylonitrile is produced by the reaction of propylene, ammonia, and oxygen C3H6 + NH3 + O2 C3H3N + 3H2O The feed contains 10 mole% propylene, 12% ammonia, and 78% air. A fractional conversion of 30% of the limiting reactant is achieved. Determine which reactant is limiting, the percentage by which each of the other reactants is in excess, and the molar flow rates of all product gas constituents for a 30% conversion of the limiting reactant, taking 100...
Hydrogen (H) is an important product for a large number of applications and can be produced by the following chemical reaction: CO + H2O + CO2 + H2 In order to produce Hydrogen, a process is designed with the following configuration: The feed to the reactor is made up of water and carbon monoxide (CO) in an unknown proportion. Once the reaction occurs, the effluent from the reactor, which has 3 mol% H2, passes through a separator from which two...