a cylindrical water storage 12. in diameter and 8m high, is filled through a 100 mm pipe carrying a velocity of 40 m/s. (a) how long it will take to fill the tank? (b) if the tank has an out flow pipe at the bottom with a capacity of 0.12 m^3/s discharge rate and both inflow and outflow pipes are opened at the same time, compute the time rate of the rise of the water level. (c) compute the time needed to fill it with both pipes opened.
We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
a cylindrical water storage 12. in diameter and 8m high, is filled through a 100 mm...
11. The cylindrical storage tank is being filled using a pipe of diameter 3 in. Determine the rate (in ft/s) at which the level in the tank is rising if the volumetric flow rate into the tank at A is 40 gal/min 10 ft 15 ft Figure 5
Draining of cylindrical tank. You have a cylindrical tank full of water with a diameter =Dtank. The height (htank) is changing with time. You are draining the tank through a hole in the bottom. The hole has a diameter Dhole. The velocity of the water leaving the tank depends on the height of the water and can be given as: v2 = 2 g htank. When the hole is first opened, the height of the water is ho. Draw and...
Problem 2: Conservation of Mass Water flows steadily into a tank through pipes 1 and 2 and discharges at a steady rate through pipes 3 and 4 (see figure). The mean velocity of inflow and outflow in pipes 1, 2 and 3 is 50 ft/s. The hypothetical outflow velocity in pipe 4 varies linearly from zero at the wall to a maximum at the center of the pipe. What are (a) the mass flow rate in pipe 4 and (b)...
20. A cylindrical water tower of diameter 3.0 m supplies water to a house. The level of water in the water tower is 35 m above the point where the water enters the house through a pipe that has an inside diameter 5.0 cm. The pressure at the top of the water tower is I ATM and the water in the cylindrical tank flows slowly at a speed of 0.01 cm/s. At what speed does the water flow in the...
L 2. Steady statemass balance: Water is flowing at steady state in a 0.1 meter-diameter pipe with a maximum velocity (turbulent profile) of 0.3 meters/sec. The pipe then goes through an expansion, to where it is then flowing in a 0.5 meter-diameter pipe, and the flow regime has changed from turbulent to laminar. In the second section of pipe, calculate the velocity as (a) block flow profile (Vavg), and (b) maximum velocity in laminar flow profile? HINT: you will need...
QUESTION 4 A cylindrical tank 3 m in diameter with the with axis vertical, has an inflow line of 0.1 m inside diameter and an outflow line 0.2 m inside diameter. Water is flowing in the inflow line at velocity of 2 m/s and leaving by the outflow line at a velocity of 1 m/s. Is the level in the tank rising or falling? How fast? [10]
A cylindrical water-storage tank has a height of 8.1 m and a radius of 6.4 m. The storage tank tank is 30 m off the ground. A 12 cm diameter pipe runs vertically down from the tank and goes 1.9 m underground before turning horizontal. The water flow in the horizontal pipe is 77 L/s. full of water but is vented to the atmosphere. The bottom of the EXAMPLE оТES IMAGES DISCUSS UNITS STATS HELP Answer Description Chk History rt...
A large cylindrical tank with diameter D is open to the air at the top. The tank contains water to a height H. A small circular hole with diameter d<< D is then opened at the bottom of the tank. Ignore any viscosity effects. (a) Find the height y of water in the tank as a function of time t after the hole is opened. (b) If the initial height H of the water is doubled, by what factor does...
Question 3 (a) Water flows through a horizontal pipeline of constant 400 mm diameter in a water treatment plant. The pipe bends through a 70° angle. In order to design a thrust block for the bend, calculate the magnitude and line of action of the force exerted by the water on the pipe. The discharge through the pipe is 0.4 m/s. The water pressure at the inlet is equivalent to 22 m head of water. [10 marks] (b) Oil of...
4 A cylindrical water-storage tank has a height of 7.7 m and a radius of 6.3 m. The storage tank is full of water but is vented to the atmosphere. The bottom of the tank is 32 m off the ground. A 11 cm diameter pipe runs vertically down from the tank and goes 1.8 m underground before turning horizontal. The water flow in the horizontal pipe is 72 L/s. MPLE I NOIES | IMAGES İ Discuss | | uNITS...