Homework Answers
thank
you.. please upvote it
Add Answer to:
The correct answers are 16 kW and 7.1 times 10^-3 kg/s
10.46 Saturated steam at 1...
Saturated steam at 1 atm condenses on a vertical 200 mm diameter pipe, 9 m long....
Saturated steam at 1 atm condenses on a vertical 200 mm diameter pipe, 9 m long. The pipe surface is at 90 C. Find the total condensation mass flow rate.
Saturated steam at 1 atm condenses on a vertical 200 mm diameter pipe, 9 m long....
Saturated steam at 1 atm condenses on a vertical 200 mm diameter pipe, 9 m long. The pipe surface is at 90 C. Find the total condensation mass flow rate.
4. A pure copper pipe with inner diameter Di-10 mm ard outer diameter Do-14 mm is surrounded by s...
4. A pure copper pipe with inner diameter Di-10 mm ard outer diameter Do-14 mm is surrounded by saturated steam with pressure p 172 bar and convection coefficient h 6000 carries water with mean velocity u- (a) Determine the convective heat transfer coefficient inside the pipe for water at mean temperature Tm 37° C (b) At this same location, determine the total thermal resistance (per unit length) between the water and the steam. (c) Determine the heat transfer rate (per...
Consider steady flow of steam through a horizontal pipe at a rate of 0.5 kg/s: Steam...
Consider steady flow of steam through a horizontal pipe at a rate of 0.5 kg/s: Steam enters the pipe as a saturated vapor at 0.5 MPa with a velocity of 12 m/s and exits at 0.45 MPa with a quality of 95% and a velocity of 10.5 m/s. Heat transfer from the pipe to the surroundings, which is at 300 K. takes place at an average outer surface temperature of the pipe) of 400 K. Saturated vapor 0.5 MPa 12...
Steam enters a horizontal 14-cm-diameter pipe as a saturated vapor at 5 bar with a velocity...
Steam enters a horizontal 14-cm-diameter pipe as a saturated vapor at 5 bar with a velocity of 10 m/s and exits at 4.5 bar with a quality of 95%. Heat transfer from the pipe to the surroundings at 291K takes place at an average outer surface temperature of 400 K. For operation at steady state, determine (a) the velocity at the exit, in m/s. (b) the rate of heat transfer from the pipe, in kW.? (c) the rate of entropy...
CORRECTION: Ts,o in part (c) should be in KELVIN not celsius (322.1 K)
CORRECTION: Ts,o in part (c) should be in KELVIN not
celsius (322.1 K)
. A pure copper pipe with inner diameter D, 10 mm and outer diameter D 14 mm is surrounded by saturated steam with pressure p = 172 bar and convection coefficient h.-6000 carries water with mean velocity um 1 ! (a) Determine the convective heat transfer coefficient inside the pipe for water at mean temperature Tm-37°C (b) At this same location, determine the total thermal resistance (per...
Problem 3. (25 points) In a Rankine power system, 1.5 kg/s of steam leaves the turbine...
Problem 3. (25 points) In a Rankine power system, 1.5 kg/s of steam leaves the turbine as saturated vapor at 0.51 bar. The steam is condensed to saturated liquid by passing it over the tubes of a shell-and-tube heat exchanger, while liquid water, having an inlet temperature of T = 280 K, is passed through the tubes. The condenser contains 100 thin-walled tubes, each of 10-mm diameter, and the total water flow rate through the tubes is 15 kg/s. The...
PROBLEM 3 (45 points) The condenser of a large steam power plant is a heat exchanger...
PROBLEM 3 (45 points) The condenser of a large steam power plant is a heat exchanger in which steam is condensed to liquid water. Assume the condenser to be a parallel flow shell-and-tube heat exchanger consisting of a single shell and 1x10 tubes, each executing two passes. The inner diameter of tubes is D = 50 mm and its thickness is 5 mm (Do not ignore the thickness). The steam condenses on their outer surface. Thermal conductivity of the tube...
a 0.4 m diameter, thin walled steel pipe is used to transport saturated steam Problem 3.049...
a 0.4 m diameter, thin walled steel pipe is used to transport
saturated steam
Problem 3.049 A 0.4-m-diameter, thin-walled steel pipe is used to transport saturated steam at a pressure of 20 bars in a room for which the air temperature is 25°C and the convection heat transfer coefficient at the outer surface of the pipe is 20 W/m2-K. (a) What is the heat loss per unit length from the bare pipe (no insulation)? (b) Estimate the heat loss per...
Problem 7.075 An air-cooled steam condenser is operated with air in cross flow over a square,...
Problem 7.075 An air-cooled steam condenser is operated with air in cross flow over a square, in-line array of 400 tubes (NL = NT = 20), with an outside tube diameter of 20 mm and longitudinal and transverse pitches of SL = 60 mm and ST-42 mm, respectively. Saturated steam at a pressure of 2.455 bars enters the tubes, and a uniform tube outer surface temperature of Ts - 390 K may be assumed to be maintained as condensation occurs...
Saturated steam at 1 atm condenses on a vertical 200 mm diameter pipe, 9 m long. The pipe surface is at 90 C. Find the total condensation mass flow rate.
Saturated steam at 1 atm condenses on a vertical 200 mm diameter pipe, 9 m long. The pipe surface is at 90 C. Find the total condensation mass flow rate.
4. A pure copper pipe with inner diameter Di-10 mm ard outer diameter Do-14 mm is surrounded by saturated steam with pressure p 172 bar and convection coefficient h 6000 carries water with mean velocity u- (a) Determine the convective heat transfer coefficient inside the pipe for water at mean temperature Tm 37° C (b) At this same location, determine the total thermal resistance (per unit length) between the water and the steam. (c) Determine the heat transfer rate (per...
Consider steady flow of steam through a horizontal pipe at a rate of 0.5 kg/s: Steam enters the pipe as a saturated vapor at 0.5 MPa with a velocity of 12 m/s and exits at 0.45 MPa with a quality of 95% and a velocity of 10.5 m/s. Heat transfer from the pipe to the surroundings, which is at 300 K. takes place at an average outer surface temperature of the pipe) of 400 K. Saturated vapor 0.5 MPa 12...
CORRECTION: Ts,o in part (c) should be in KELVIN not
celsius (322.1 K)
. A pure copper pipe with inner diameter D, 10 mm and outer diameter D 14 mm is surrounded by saturated steam with pressure p = 172 bar and convection coefficient h.-6000 carries water with mean velocity um 1 ! (a) Determine the convective heat transfer coefficient inside the pipe for water at mean temperature Tm-37°C (b) At this same location, determine the total thermal resistance (per...
Problem 3. (25 points) In a Rankine power system, 1.5 kg/s of steam leaves the turbine as saturated vapor at 0.51 bar. The steam is condensed to saturated liquid by passing it over the tubes of a shell-and-tube heat exchanger, while liquid water, having an inlet temperature of T = 280 K, is passed through the tubes. The condenser contains 100 thin-walled tubes, each of 10-mm diameter, and the total water flow rate through the tubes is 15 kg/s. The...
PROBLEM 3 (45 points) The condenser of a large steam power plant is a heat exchanger in which steam is condensed to liquid water. Assume the condenser to be a parallel flow shell-and-tube heat exchanger consisting of a single shell and 1x10 tubes, each executing two passes. The inner diameter of tubes is D = 50 mm and its thickness is 5 mm (Do not ignore the thickness). The steam condenses on their outer surface. Thermal conductivity of the tube...
a 0.4 m diameter, thin walled steel pipe is used to transport
saturated steam
Problem 3.049 A 0.4-m-diameter, thin-walled steel pipe is used to transport saturated steam at a pressure of 20 bars in a room for which the air temperature is 25°C and the convection heat transfer coefficient at the outer surface of the pipe is 20 W/m2-K. (a) What is the heat loss per unit length from the bare pipe (no insulation)? (b) Estimate the heat loss per...
Problem 7.075 An air-cooled steam condenser is operated with air in cross flow over a square, in-line array of 400 tubes (NL = NT = 20), with an outside tube diameter of 20 mm and longitudinal and transverse pitches of SL = 60 mm and ST-42 mm, respectively. Saturated steam at a pressure of 2.455 bars enters the tubes, and a uniform tube outer surface temperature of Ts - 390 K may be assumed to be maintained as condensation occurs...
Most questions answered within 3 hours.
-
suppose there is a normally distributed population with a mean of
250 and a standard deviation...
asked 3 minutes ago -
Question Three
Suppose you as project manager are using the Waterfall
development methodology on a large...
asked 1 hour ago -
Which statement is not true about welfare in Canada?
A.Benefits typically vary based on one's ability...
asked 1 hour ago -
Please help me with FLOWCHART and UML diagram for class,
thank you!
#include <iostream>
#include <fstream>...
asked 2 hours ago -
3. Describe the “logic circuit” of the Lac operon. Which
proteins are bound or not to...
asked 2 hours ago -
Ayesha’s adjusted gross income is $60,000 in 2019. She donated a
piece of artwork with a...
asked 2 hours ago -
For Dijkstra’s shortest path algorithm:
a. Give the Big-O time for Dijkstra’s shortest path algorithm
and...
asked 2 hours ago -
Phosphorus violates the 'octet rule' in biological molecules,
forming more covalent bonds than expected based on...
asked 2 hours ago -
A 1.3 eV electron has a 10-4 probability of tunneling
through a 2.4 eV potential barrier....
asked 3 hours ago -
What is the one ingredient that is common to being successful
with all stakeholders?
profit
trust...
asked 3 hours ago -
Write an assembly language 32 bit program that reads in lines of
text by a .txt...
asked 3 hours ago -
what is the density ( in g/L) of hydrogen gas at 29 degrees C and a...
asked 3 hours ago