Problem 9.60 Fuel Gas Combustion A fuel gas containing 55.00 mole% methane and the balance ethane...
Problem 9.60 Fuel Gas Combustion A fuel gas containing 55.00 mole% methane and the balance ethane is burned completely with pure oxygen at 25.00°C, and the products are cooled to 25.00°C. Physical Property Tables Continuous Reactor Suppose the reactor is continuous. Take a basis of calculation of 1.000 mol/s of the fuel gas, assume some value for the percent excess oxygen fed to the reactor (the value you choose will not affect the results), and calculate -Q (kw), the rate...
A fuel gas that contains mole% methane and the balance ethane is burned completely with pure oxygen at °C, and the products are cooled to °C. suppose that the combustion takes place in a constant-volume batch reactor. Take mol as a basis of calculation of the fuel gas charged into the reactor and assume any percent excess oxygen, and calculate –Q(kJ) for the cases of liquid water as well as water vapor as products. 40.00 25.00 We were unable to...
A fuel gas that contains mole% methane and the balance ethane is burned completely with pure oxygen at °C, and the products are cooled to °C. Suppose that the reactor is continuous. Take a basis of calculation of mol/s of the fuel gas, assume some value for the percent excess oxygen fed to the reactor (the value you choose is not going to affect the results), and calculate -Q⋅ (kW), the rate at which heat must be transferred from the...
A fuel gas containing 85.0 mole% methane and the balance ethane is burned completely with 15.0 % excess air. The stack gas leaves the furnace at 900.0 °C and is cooled to 450.0 °C in a waste-heat boiler, a heat exchanger in which heat lost by cooling gases is used to produce steam from liquid water for heating, power generation, or process applications. Physical Property Tables Combustion Gases Correct. Take as a basis 100.0 mol of the fuel gas fed...
A fuel gas containing 95 mole% methane and the balance ethane is burned completely with 25% excess air. The stack gas leaves the furnace at 900°C and is cooled to 450°C in a waste-heat boiler, a heat exchanger in which heat lost by cooling gases is used to produce steam from liquid water for heating, power generation, or process applications. (a) Taking as a basis of calculation 100 mol of the fuel gas fed to the furnace, calculate the amount...
unit operation, introduction to material balance 3) A fuel gas containing 60 mole% methane and the balance ethane is burned completely with 35% excess air. The stack gas leaves the furnace at 700°C and is cooled to 250°C in a heat exchanger in which heat lost by cooling gases is used to produce steam from liquid water for heating, power generation, or process applications. Taking as a basis of calculation 100 mol/s of the fuel gas fed to the furnace,...
Problem: Bapco needs to burn natural-gas fuel that contains 75 mol% methane, 15 mol% ethane, and 10 mol% nitrogen. The following two reactions takes place: CH4(g) 20209) CO2(0) 2H2o) C2H6 (g) + 3.502(g) 2C02(g)3H20 (g) a) What is the standard heat of combustion (kJ/mol) of the fuel at 25 oC with water(g) as a product b) The fuel is supplied to a furnace with 60% excess air, both entering at 250C. The products leave at 600°C. If the combustion is...
Methane gas is burned with 30 percent excess air. This fuel enters a steady-flow combustor at 0.9 atm and 25'C and is mixed with the air. The products of combustion leave this reactor at 0.9 atm and 1600 K. Determine the equilibrium composition of the products of combustion and the amount of heat released by this combustion in kJ/kmol methane. Use data from the tables. CH4 Combustion 25℃ CO, HO 1600 K 30%acess 25 C The amount of carbon dioxide...
Problem 4.84 Combustion Mixture A gas contains 75.0 wt% methane, 10.00 wt% ethane, 5.00 wt% ethylene, and the balance water. Composition Calculate the molar composition of this gas on both a wet and a dry basis and the ratio (mol H20/mol dry gas). Component Mole % (Wet basis) Mole % (Dry basis) Methane 81.5 90.22 Ethane 5.74 6.35 Ethylene 3.09 3.42 Water 9.66 mol H20/mol dry gas: Click if you would like to Show Work for this question: Open Show...
Problem 4.84 Combustion Mixture A gas contains 75.0 wt% methane, 10.00 wt% ethane, 5.00 wt% ethylene, and the balance water. Composition Calculate the molar composition of this gas on both a wet and a dry basis and the ratio (mol H20/mol dry gas). Component Mole % (Wet basis) Mole % (Dry basis) Methane 81.5 90.22 Ethane 5.74 6.35 Ethylene 3.09 3.42 Water 9.66 mol H20/mol dry gas: Click if you would like to Show Work for this question: Open Show...