The upper surface of a 60-cm-thick solid plate (k = 237 W/m.K) is being cooled by...

Question

Question

The upper surface of a 60-cm-thick solid plate (k = 237 W/m.K) is being cooled by water with temperature of 20°C. The upper a

Add a comment Improve this question Transcribed image text

Answer 1

Answer #1

Due to no slip conditions there will be stagnant layer of water in which conduction heat transfer will take place between upper surface of plate and stagnant water layer.

Add a comment

Answer 2

Similar Homework Help Questions

The upper surface of a 60-cm-thick solid plate (k = 237 W/m.K) is being cooled by...

The upper surface of a 60-cm-thick solid plate (k = 237 W/m.K) is being cooled by water with temperature of 20°C. The upper and lower surfaces of the solid plate maintained at constant temperatures of 60°C and 120°C, respectively. Given: The thermal conductivity of the solid plate is given as k= 237 W/m.K. (T1+T) The thermal conductivity of water at the film temperature of Tf =(60°C + 20°C)/2 = 40°C is kfluid = 0.631 W/m.K. = 2 1. value: 3.00...
The upper surface of a 60-cm-thick solid plate (k = 237 W/m-K) is being cooled by...

The upper surface of a 60-cm-thick solid plate (k = 237 W/m-K) is being cooled by water with temperature of 20°C. The upper and lower surfaces of the solid plate maintained at constant temperatures of 60°C and 120°C, respectively. Given: The thermal conductivity of the solid plate is given as k= 237 W/m.K. The thermal conductivity of water at the film temperature of Tg = 20°C)/2 = 40°C is kfluid = 0.631 W/mK. (T.,+T) = (60°C + 2. value 3.00...
1 answer & continue > The upper surface of a 60-cm-thick solid plate (k = 237...

1 answer & continue > The upper surface of a 60-cm-thick solid plate (k = 237 W/m-K) is being cooled by water with temperature of 20°C. The upper and lower surfaces of the solid plate maintained at constant temperatures of 60°C and 120°C, respectively. Given: The thermal conductivity of the solid plate is given as k = 237 W/mK. The thermal conductivity of water at the film temperature of T; = (1,1770) =(60°C + 20°C)/2 = 40°C is kfluid =...

During its manufacture, plate glass at 600°C is cooled by passing air over its surface such...

During its manufacture, plate glass at 600°C is cooled by passing air over its surface such that the convection heat transfer coefficient is h. To prevent cracking, it is known that the temperature gradient must not exceed 15 °C/mm at any point in the glass during the cooling process. The thermal conductivity of the glass is 1.4 W/mK and its surface emissivity is 0.75. The temperature of the air that is used for the cooling is 315 °C. Assume that...
A large wall made of 10-cm-thick solid brick (k = 0.8 W/m.K, p 2000 kg/m3, and p 800 J/kg.K) is o...

Heat transfer question. A large wall made of 10-cm-thick solid brick (k = 0.8 W/m.K, p 2000 kg/m3, and p 800 J/kg.K) is originally at a uniform temperature of 30°C. The wall is adiabatic (well insulated) on one side as shown in the figure. The other surface is suddenly exposed to convection air flow at 10°C, resulting in a heat transfer coefficient h=40W/m2.K. Fluid (4.1) Determine the temperature of both surfaces Gr 0 and x 10 cm) after 5 hr...
A hot brass plate is having its upper surface cooled by impinging jet of the air...

A hot brass plate is having its upper surface cooled by impinging jet of the air at temperature of 15 oC and convection coefficient of k=180, 190, 200, 210 220 and 230 W/m2 oK. The 20-cm wide and 10-cm length brass plate (ρ=8530 kg/m3, and Cp=380 J/kg K. k=220 w/mK had a uniform initial temperature of 650 oC, and lover surface of the plat is well insulated. Using uniform node for Δx = Δy = 2.5 cm and left side...

5. The upper surface of a metal plate is being cooled with parallel airflow while its...

5. The upper surface of a metal plate is being cooled with parallel airflow while its lower surface is subjected to a uniform heat flux of 810 W/m². The air has a free stream velocity and temperature of 2.5 m/s and 15°C respectively. Given: The properties of air: k = 0.02588 W/m-K, v = 1.608 x 10-9 mʻls, and Pr = 0.7282. Determine the surface temperature of the plate at x = 1.5 m from the leading edge. [10 Marks)...
Question 7 10 points Hot carbon dioxide exhaust gas at 1am is being cooled by flat...

Question 7 10 points Hot carbon dioxide exhaust gas at 1am is being cooled by flat plates. The gas at 220°C flows in paralel over the upper and lower surfaces of a 2 m long flat plate at a velocity of 2.7 ms and the fat plate surface temperature is maintained at 80°C Determine the heat transfer coefficinth in wim?c for the following conditions Re Number - 414.117.86 Thermal conductivity k 0.02652 Prandel Number Pr 0.8292
For such aircraft application (Figure 3), a wall is made from insulation material (k-0.030 W/m.K) and...

For such aircraft application (Figure 3), a wall is made from insulation material (k-0.030 W/m.K) and the insulation material is mounted between four layers of carbon steel (2 mm thickness), the carbon layers are separated by a 2 mm air gap (kair-0.025 W/mK). Figure 3, the thermal conductivity of the carbon steel is (k-15.5 W/m.K). The temperature inside the wall is maintained at 6 °C. The environmental temperature is 24°C. The engineer would like to avoid condensation occurring at outer...

During air cooling of oranges, grapefruit, and tangelos, the heat transfer coefficient for combined convection, radiation,...

During air cooling of oranges, grapefruit, and tangelos, the heat transfer coefficient for combined convection, radiation, and evaporation for air velocities of 0.11<V< 0.33 m/s is determined experimentally and is expressed as h = 5.05 KairRe131D, where the diameter Dis 0.1 m. Oranges are cooled by refrigerated air at 5°C and 1 atm at a velocity of 0.3 m/s. Given: The thermal conductivity of the orange is given to be k = 0.50 W/m°C. The thermal conductivity and the kinematic...

The upper surface of a 60-cm-thick solid plate (k = 237 W/m.K) is being cooled by...

Homework Answers