The correct answer is B = 0.007 radian ACW
Please like the answer
Torsion A stepped shaft ABC with the shear modulus of elasticity G-76 GPa is shown in...
4.11. A shaft ABC is made of two segments AB and BC (Figure 4. 11). Segment 4B is solid with a diameter of 100 mm and BC is hollowed with an outer diameter of 75 mm and wall thickness of 5 mm. The shear modulus is 80 GPa for segment AB and 60 GPa for BC Extemal torques To=25 Nm in the counter-clockwise direction is applied at Cand 1s=10 Nm in the clockwise direction is applied at B. A counter-clockwise...
A stepped shaft ABC with built-in end at A is subjected to the torques Ta and Te at sections B and C. The diameters of the left (AB) and right (BC) segments are di and d2, respectively. The lengths are Li and L2, respectively. The shear modulus is GB for AB and GA for BC 1. What is the maximum shearing stress in the segment AB? 2. What is the angle of twist B at section B? 3. What is...
The shaft is made of steel with shear modulus of 100 GPa. Its diameter is 100 mm. It is fixed at B while A is loose and can rotate 0.005 rad before becoming fixed. When the torques are applied to C and D, determine the maximum shear stress in regions AC and CD of the shaft " Please draw and write everything clearly. I preferred to be typed " The shaft is made of steel with shear modulus of 100...
160 mm P2. The dimensions of a stepped steel shaft (G = 80 GPa) are shown below, along with the external torques applied on it. The shaft has a fixed support at point A. Answer the following: (35 pt) a. Plot the internal torque diagram. b. Find the maximum shearing stress on a section 3 m from the left end of the shaft (A). 35 kNm C. Find the maximum shearing strain on a 1 m section 3 m from...
L-A solid circular shaft of varying diameters is subjected to three torques with magnitudes equal to: T, = 600 Ibin, T2 -500 Ib-in and T3 200 Ib-in, as shown in the figure. The thicker segment has a diameter of di 2.83 in, and the other segment has diameter equal to d2 2.38 in. The length of each segment, in inches, is shown in the figure. The shaft is made of steel with G- 3.15 ksi. (a) Draw the torsion diagram...
#2 Torsion clock Design a torsion clock made of steel (shear modulus 79.3 GPa, density 7.9 g/cm3) based on a torsion wire (length 0.2 m, diameter 0.3 mm), a rod (diameter 3 mm, length 20 cm) and two small masses (20 g each) attached to the rod. Position the masses on the rod such that the resulting oscillation time is 1 s! What is the track velocity of the masses at the zero transition. if the starting amplitude is 45°,...
UESTION 24 Four gears are attached to a circular shaft and transmit the torques shown in the figure (12) below. (CLO4) (e points) 900 N-m 2100 Nm 450 N-m 750 N-m Figure (12) If the shaft diameter is 34 mm and the shear modulus is 70 GPa, what will be the angle of twist in radians of D with respect to A (measuresd C.C.W.)? Take distances AB-BC-CD-25cm. O 0.0038 O 0.0572 O 0.09812 ○ 00286 QUESTION 25 Under normal operating...
The gears attached to the fixed-end steel shaft are subjected to the torques shown in the figure. If the shear modulus of elasticity is 150 GPa a determine the following: nd the shaft has a diameter of 14 mm, a. Sketch the torque diagram along the steel shaft. b. Determine the maximum shear stress at Tmax and specify location. c. Sketch the shear stress distribution along the radial line at location specified in (b). d. Determine the displacement of the...
5. A stepped, circular shaft is fixed at A and subjected to torques at B, D and E in the direction:s shown. The segment AB is solid with a radius of 40 mm. The segment CE is hollow with an outside radius of 30 mm and inside radius of 20 mm. LAB 0.5 m, LBc-0.5 m, LcD-0.9 m, LD 0.6 m. 1I3 a) If To equals 6 N-m, TB - 14 N-m, and the magnitude of To is three times...
L=150 mm See the stepped shaft segment shown below. 2. each segment Determine the internal torque distribution fo Determine the polar moment of inertia for each segment Determine the maximum shear stress in each segment. a. b. c. d. What is the total angle of twist of one end relative to the other if each mm long? segment is T - 7000 Nm 10 mm D= 100 mm d- 50 mm 3 See the figure helow See the stepped shaft...