COMPUTER NETWORKS
Question 1
Channel capacity is calculated in bit rates. The formula for a noiseless channel is
Capacity = 2 * Bandwidth * log2 L
Kilo = 1000
L means the number of signal levels
Capacity = 2 * 8000 * log2 16 = 2 * 8000 * 4 = 64000 bps
Question 2
Speed = Wavelength x Wave Frequency
100 m/s = wavelength x 200 Hz
wavelength = 0.5 meters
Question 3
Frequency = 1/T Where T is period
Frequency = 1/4s = 0.25 Hz
1/s gives Hz unit and 1/4=0.25
COMPUTER NETWORKS What is the channel capacity if you have 16 signal levels and the bandwidth...
What is the channel capacity if you have 16 signal levels and the bandwidth is 8 KHz? Show work!!!
What is the wavelength if the speed/velocity of the wave is 100 m/s and frequency is 200Hz ? Show work please!
Assume a discrete signal of 8 voltage levels has been transmitted through a noisy channel with bandwidth of 3500 Hz. The SNR is 2500 Watts and the power of the noise is 2 Watts. A. What is the power of the signal? B. What should be the minimum sampling rate? C. What is the capacity of this channel?
8 8.6-4 For a DSB-SC system with a channel noise PSD of Sn() 10-12 and a baseband signal of bandwidth 5 kHz, the receiver output SNR is required to be at least 47 dB. The receiver is as shown in Fig. 8.30. (a) What must be the signal power Si received at the receiver input? (b) What is the receiver output noise power No? (c) What is the minimum transmitted power Sr if the channel transfer function is He)10-3 over...
Consider a FM system that is used to communicate the following message signal: S. m(t) 20 0.05 0.1 015 10 -0.05 with a frequency deviation constant ky 10, and a message bandwidth of W =15 kHz the one-sided noise power-spectral density in the transmission channel is No= 10-8 W/Hz, and an attenuation of 10 is introduced during transmission in the channel as well. a. What is the average-to-peak-power ratio of the message (or, equivalently the power content of the normalized...
Consider a FM system that is used to communicate the following message signal: S. m(t) 20 0.05 0.1 015 10 -0.05 with a frequency deviation constant ky 10, and a message bandwidth of W =15 kHz the one-sided noise power-spectral density in the transmission channel is No= 10-8 W/Hz, and an attenuation of 10 is introduced during transmission in the channel as well. a. What is the average-to-peak-power ratio of the message (or, equivalently the power content of the normalized...
3. A square wave has a frequency of 100 MHz. (a) What is the frequency of the fundamental signal, fo? fo (b) What is the frequency of the 5th harmonic, fs? fs- (e) What is the wavelength of the Sh harmonic, às? Take speed of light, u 3 x 10 m/s (d) What is the bandwidth of the signal if the 13h harmonic is the last harmonic?
Data communication Qs
A signal has a bandwidth frequency of 150 Hz and the highest frequency is 170 Hz. What is the lowest frequency of the signal? (just put the whole number. No decimal values. No units next to the number) A periodic signal completes one cycle in 0.04 second. What is the frequency? A sine wave completes 7200 cycles in one hour. What are its frequency and period? I: 50 Hz, II: 10 Hz, 0.1 seconds I: 25 Hz,...
Assume we have a signal of frequency 100 Hz, travelling in a cable with propagation speed of 100 meter/second. a. What is the wave length of the signal in meters? b. If the cable is 500 meters long, how many wavelength can fill the cable? Please elaborate the answer if you can, Thank you.
(a) Consider a digital communication system with a frequency band ranging from 3 MHz to 4 MHz. It is required to operate without unacceptable bit errors for which let the required SNR min = 24dB. Compute the channel transmission capacity for this minimum value of SNR. (b) Let us consider a Nyquist channel capacity formula C = 2B log2 (M) (in bits/second) where M is the number of signal levels per second, and B is the bandwidth assumed in part...