Homework Answers
DO
NOT FORGET TO THUMBS UP......IF YOU SATISFIES WITH MY
ANSWER....PLEASE LIKE IT.....
Add Answer to:
Оооо оооо оооо оооо т. Steel bar A steel bar, 80 mm in diameter and 200...
A long steel bar with a diameter of 4 cm (ρ = 7840 kg / m3...
A long steel bar with a diameter of 4 cm (ρ = 7840 kg / m3 , cp = 580 J / kg ° K, k = 52 W / mK, α = 1.21x10-5 m2 / s), internal enters the 2 m long moving belt heat treatment furnace at ambient temperature of 900 ° C at 40 ° C. Since the film coefficient in the oven is 100 W / m2K, the center axis temperature of the bar at the...
4. A pure copper pipe with inner diameter Di-10 mm ard outer diameter Do-14 mm is surrounded by s...
4. A pure copper pipe with inner diameter Di-10 mm ard outer diameter Do-14 mm is surrounded by saturated steam with pressure p 172 bar and convection coefficient h 6000 carries water with mean velocity u- (a) Determine the convective heat transfer coefficient inside the pipe for water at mean temperature Tm 37° C (b) At this same location, determine the total thermal resistance (per unit length) between the water and the steam. (c) Determine the heat transfer rate (per...
Steel balls 12 mm in diameter are annealed by heating to 1100 K and then slowly...
Steel balls 12 mm in diameter are annealed by heating to 1100 K
and then slowly cooling to 390 K in an air environment for which
?T?= 325 K and h= 20 W/m2·K. Assuming the properties of
the steel to be k= 40 W/m·K, ?= 7800 kg/m3, and c= 600
J/kg·K, estimate the time required for the cooling process.
Problem 5.007 Your answer is incorrect. Try again. Steel balls 12 mm iri diameter are annealed by heatin time required for...
Water enters a 5-mm diameter and 13-m long tube at 15 °C with a velocity of...
Water enters a 5-mm diameter and 13-m long tube at 15 °C with a velocity of 0.3 m/s and leaves at 45 °C. The tube is subject to a uniform heat flux of 2000 W/m2. Assume the following properties of water: p = 996 kg/m3, Cp = 4178 J/kg.K, K = 0.615 W/m.K. u = 0.798 x 10-kg/mus. Pe=5.42. (7) What is the average convective heat transfer coefficient considering the entire length of the pipe? (a) 791 W/m2K (b) 681...
A hot fluid passes through a thin-walled tube of 10-mm diameter at 18 kg/h at a...
A hot fluid passes through a thin-walled tube of 10-mm diameter at 18 kg/h at a temperature of 85 C. On the outside, coolant flows across the tube at a velocity of 3 m/s at a temperature of 25 C. Neglecting the thermal resistance of the metal wall, calculate 1. (a) The two heat transfer coefficients, (b) Overall heat transfer coefficient, and (c) Cooling rate (in W/m) achieved in the given configuration Assume hot fluid properties are constant at the...
please make it easy to understand Question Four (a) A steel ring of 300 mm and 200 mm external and internal diameter...
please make it easy to understand
Question Four (a) A steel ring of 300 mm and 200 mm external and internal diameters res solid steel shaft. The interference is arranged such that the radial pressure between the mating surfaces will not fall below 30 MN/m2 whilst the assembly rotates in service. If the maximum circumferential stress on the inner surface of the ring is limited to 240MN/m2, and there is no relative slip between the shaft and the ring, determine...
Problem 3. (25 points) In a Rankine power system, 1.5 kg/s of steam leaves the turbine...
Problem 3. (25 points) In a Rankine power system, 1.5 kg/s of steam leaves the turbine as saturated vapor at 0.51 bar. The steam is condensed to saturated liquid by passing it over the tubes of a shell-and-tube heat exchanger, while liquid water, having an inlet temperature of T = 280 K, is passed through the tubes. The condenser contains 100 thin-walled tubes, each of 10-mm diameter, and the total water flow rate through the tubes is 15 kg/s. The...
A long steel bar of radius R=2.5 cm, k =50 W/(m °C), p= 7800 kg/m), and...
A long steel bar of radius R=2.5 cm, k =50 W/(m °C), p= 7800 kg/m), and c = 0.5 kJ/(kg. . °C) is to be annealed by cooling slowly from 800.°C to 100.°C in an environment at temperature 50.°C. If the heat transfer coefficient between the environment and the surface of the bars is h = 45 W/(m .°C), determine the time required for the annealing process using lumped system analysis.
QUESTION 5 A 12-m-long and 11-mm-inner-diameter pipe made of commercial steel is used to heat a...
QUESTION 5 A 12-m-long and 11-mm-inner-diameter pipe made of commercial steel is used to heat a liquid in an industrial process. The liquid enters the pipe with T; = 20°C, V=0.8 m/s. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the pipe, so that the fluid exits at 60°C. Assuming fully developed flow and taking the average fluid properties to be p = 992.1 kg/m2, k = 0.631 W/m-°C, Cp =...
Problem 2: A stainless steel rod (k-21 W/m-K, p-8000 kg/m3, C,,-570 J/kg-K) with diameter D-10 mm is heat-treated as it...
Problem 2: A stainless steel rod (k-21 W/m-K, p-8000 kg/m3, C,,-570 J/kg-K) with diameter D-10 mm is heat-treated as it passes through a furnace at a speed of 2 cm/s. The furnace has a convection coefficient of 80 W/m2-K and an air temperature of 900°C. The furnace is 3 m long, and the stainless steel enters at 20°C. (a) Using a control volume of length S traveling with the rod, develop a differential equation for the rate of change of...
4. A pure copper pipe with inner diameter Di-10 mm ard outer diameter Do-14 mm is surrounded by saturated steam with pressure p 172 bar and convection coefficient h 6000 carries water with mean velocity u- (a) Determine the convective heat transfer coefficient inside the pipe for water at mean temperature Tm 37° C (b) At this same location, determine the total thermal resistance (per unit length) between the water and the steam. (c) Determine the heat transfer rate (per...
Steel balls 12 mm in diameter are annealed by heating to 1100 K
and then slowly cooling to 390 K in an air environment for which
?T?= 325 K and h= 20 W/m2·K. Assuming the properties of
the steel to be k= 40 W/m·K, ?= 7800 kg/m3, and c= 600
J/kg·K, estimate the time required for the cooling process.
Problem 5.007 Your answer is incorrect. Try again. Steel balls 12 mm iri diameter are annealed by heatin time required for...
Water enters a 5-mm diameter and 13-m long tube at 15 °C with a velocity of 0.3 m/s and leaves at 45 °C. The tube is subject to a uniform heat flux of 2000 W/m2. Assume the following properties of water: p = 996 kg/m3, Cp = 4178 J/kg.K, K = 0.615 W/m.K. u = 0.798 x 10-kg/mus. Pe=5.42. (7) What is the average convective heat transfer coefficient considering the entire length of the pipe? (a) 791 W/m2K (b) 681...
A hot fluid passes through a thin-walled tube of 10-mm diameter at 18 kg/h at a temperature of 85 C. On the outside, coolant flows across the tube at a velocity of 3 m/s at a temperature of 25 C. Neglecting the thermal resistance of the metal wall, calculate 1. (a) The two heat transfer coefficients, (b) Overall heat transfer coefficient, and (c) Cooling rate (in W/m) achieved in the given configuration Assume hot fluid properties are constant at the...
please make it easy to understand
Question Four (a) A steel ring of 300 mm and 200 mm external and internal diameters res solid steel shaft. The interference is arranged such that the radial pressure between the mating surfaces will not fall below 30 MN/m2 whilst the assembly rotates in service. If the maximum circumferential stress on the inner surface of the ring is limited to 240MN/m2, and there is no relative slip between the shaft and the ring, determine...
Problem 3. (25 points) In a Rankine power system, 1.5 kg/s of steam leaves the turbine as saturated vapor at 0.51 bar. The steam is condensed to saturated liquid by passing it over the tubes of a shell-and-tube heat exchanger, while liquid water, having an inlet temperature of T = 280 K, is passed through the tubes. The condenser contains 100 thin-walled tubes, each of 10-mm diameter, and the total water flow rate through the tubes is 15 kg/s. The...
A long steel bar of radius R=2.5 cm, k =50 W/(m °C), p= 7800 kg/m), and c = 0.5 kJ/(kg. . °C) is to be annealed by cooling slowly from 800.°C to 100.°C in an environment at temperature 50.°C. If the heat transfer coefficient between the environment and the surface of the bars is h = 45 W/(m .°C), determine the time required for the annealing process using lumped system analysis.
QUESTION 5 A 12-m-long and 11-mm-inner-diameter pipe made of commercial steel is used to heat a liquid in an industrial process. The liquid enters the pipe with T; = 20°C, V=0.8 m/s. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the pipe, so that the fluid exits at 60°C. Assuming fully developed flow and taking the average fluid properties to be p = 992.1 kg/m2, k = 0.631 W/m-°C, Cp =...
Problem 2: A stainless steel rod (k-21 W/m-K, p-8000 kg/m3, C,,-570 J/kg-K) with diameter D-10 mm is heat-treated as it passes through a furnace at a speed of 2 cm/s. The furnace has a convection coefficient of 80 W/m2-K and an air temperature of 900°C. The furnace is 3 m long, and the stainless steel enters at 20°C. (a) Using a control volume of length S traveling with the rod, develop a differential equation for the rate of change of...
Most questions answered within 3 hours.
-
You are attempting to calculate a firm’s free cash flow to
equity. You know the following...
asked 28 minutes ago -
the following reaction occurs in a balloon containing
N2O2 gas
N2O4(g)=2NO2(g)
will the volume of the...
asked 1 hour ago -
answer the questions throughout this program
public class Day implements Comparable {
Private Boolean atWork;...
asked 1 hour ago -
This is C++ code for parking fee management program
#include <iostream>
#include <iomanip>
using namespace std;...
asked 1 hour ago -
The free energy change for the following reaction at 25 °C, when
[Sn2+] = 1.17 M...
asked 3 hours ago -
An MNE is this kind of industry when competition in one country
is essentially independent of...
asked 4 hours ago -
. For this set of questions, determine what
proportion of a normal distribution is located betweeneach...
asked 5 hours ago -
A college student is employed as a door-to-door newspaper
salesman. Historical data suggests that the student...
asked 6 hours ago -
MATLAB HW 11 problem using Switch Case and Input commands
Write a script file that calculates...
asked 5 hours ago -
Considering gravitational time dilation, calculate the time that
passes in Earth’s surface while 1 hour passes...
asked 6 hours ago -
Minitab Problem: Take the Lake Hume June rainfall data and find
use the processes outlined in...
asked 7 hours ago -
X Company is trying to decide whether to continue using old
equipment to make Product A...
asked 7 hours ago