Water enters a 5-mm diameter and 13-m long tube at 15 °C with a velocity of...
Problem 2: Heat exchanger (25 points) Cold water (op 4179 J/kg K) enters the tubes of a heat exchanger at 20 °C at a rate of 3 kgs. while hot oil (cp 2200 J/kg.K) enters the shell at 130 C at the same mass flow rate and leaves at 60°C The heat exchanger consistsoftwo shells and 20 tubes, each executing four passes (two passes per shell). If the W/m2-K, assume the tube wall is very thin with convective heat transfer...
Required information A shell-and-tube heat exchanger is used for cooling 47 kg/s of a process stream flowing through the tubes from 160°C to 136°C. This heat exchanger has a total of 100 identical tubes. each with an inside diameter of 2.5 cm and negligible wall thickness. The average properties of the process stream are: p = 950 kg/m”, k = 0.50 W/mK, Cp=3.5 kJ/kg.K, and -20 mPas The coolant stream is water (cp=4.18 kJ/kg K) at a flow rate of...
Question Water at an average temperature of 110°C and an average velocity of 3.5 m/s flows through a 5-m-long Beryllium Copper (k-66 w/m.k) tube merge in a boiling water tank. Do NOT ignore the wall resistance. The inner and outer diameters of the tube are Di 1.0 cm and Do 2 cm, respectively. If the convection heat transfer coefficient at the outer surface of the tube where boiling is taking place is ho- 8400 W/m2.K, a) Determine the overall heat...
Problem 3 (20 points) A cross-flow heat exchanger consists of a bundle of 32 tubes in a long duct. Hot water at 150°C and a mean velocity of 0.5 m/s enters the tubes having inner and outer diameters of 10.2mm and 12.5mm and has to be cooled to 136°C. The tubes are made of steel of thermal conductivity k-40 W/m.K. Air at 10°c enters the exchanger (unfinned) with a volumetric flow rate of 1.0 m3/s. The convective heat transfer coefficient...
A hot fluid passes through a thin-walled tube of 10-mm diameter at 18 kg/h at a temperature of 85 C. On the outside, coolant flows across the tube at a velocity of 3 m/s at a temperature of 25 C. Neglecting the thermal resistance of the metal wall, calculate 1. (a) The two heat transfer coefficients, (b) Overall heat transfer coefficient, and (c) Cooling rate (in W/m) achieved in the given configuration Assume hot fluid properties are constant at the...
2. A nuclear fuel rod with diameter of D=40 mm and length L=1m, has properties of k=1 W/mK, c=1600J/kg.K, and p=400 kg/m3. (a)Heat is generated uniformly in the rod with q'"' = 2 x 106 W/m3. The rod is first cooled in oil with constant temperature To= 400 K and average heat transfer coefficient h=50 W/m2K. Under steady state, determine the surface temperature of the rod Ts. (10 pts) (b)Now the heat generation in the rod is stopped, where q'''...
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water in the pipe is um-0.31 m/s and the bulk temperature is 323 K (density 988 kg m-3; viscosity 0.00055 kg m' sı. Pr 3.56, thermal conductivity k 0.64 W m1 Kt). The material of the pipe has thermal conductivity k 0.61 W...
A nuclear fuel rod with diameter of D=40 mm and length L=1m, has properties of k=1 W/ mK, c=1600J/kg.K, and p=400 kg/mº. (a)Heat is generated uniformly in the rod with q'"' = 2 x 10 W/m. The rod is first cooled in oil with constant temperature Tu= 400 K and average heat transfer coefficient h=50 W/m2K. Under steady state, determine the surface temperature of the rod Ts. (10 pts) (b)Now the heat generation in the rod is stopped, where q'"'...
Q3. A very long horizontal cylinder of Unobtainium, of diameter 100 mm, is initially at a uniform temperature of 500 K. The cylinder is cooled by a fan. The fan blow airs, with a temperature of 300 K, over the cylinder at a velocity of 6 m/s in a direction perpendicular to the axis of the cylinder. Calculate a) the average convective heat transfer coefficient at the beginning of the cooling process when the initial temperature of the cylinder is...
Water at 320 K and a flow rate of 5 kg/s enters a black, thin-walled tube, which passes through a large furnace whose walls and air are at a temperature of 700 K. The diameter and length of the tube are 0.25 m and 8 m, respectively. Convection coefficients associated with water flow through the tube and airflow over the tube are 300 W/m2K and 50 W/m2.K, respectively. Tube, D-0.25 m L-8 me-1 Air 7-700 K Water -5 kas -Fumace,...