Homework Answers
Add Answer to:
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water i...
Problem : A cryogenic flui d is flowing in a 304 SS pipe. The pipe is...
Problem
:
A cryogenic flui
d is flowing in a
304 SS
pipe.
The pipe is insulated
on its outside surface
with
6
-
mm thick,
evacuated,
aluminum foil/glass mat insulation.
(“Evacuated” means a partial vacuum is drawn on the
insulation to
remove air that would otherwise fill
pores inside the insulation.)
The pipe
inside diameter
is 127 mm; it’s outside diameter is 138 mm.
The
fluid temperature is
-
173
o
C
.
T
he
air temperature
outside the...
Help mee!! Q1. Heat conduction & convection (38 pt). Hot water flows in a steel pipe...
Help mee!!
Q1. Heat conduction & convection (38 pt). Hot water flows in a steel pipe of 0.1 m inside diameter at a flow rate of 0.2 m/h and at an average temperature of 70 °C. The pipe length is 2.5 m and the inside pipe wall temperature is 60 °C Assume that the pipe thickness is small and the steel heat conductivity is high enough so that the thermal resistance of the pipe wall is negligible. Calculate: (a) The...
I. Design of Fins (35 pt). A stripping process produces a hot fluid (80°C) that flows...
I. Design of Fins (35 pt). A stripping process produces a hot fluid (80°C) that flows inside copper pipe of 20 cm diameter (the thickness of the pipe wall is negligible). Outside the pipe, there is air flow at ambient temperature (20 °C). In order to recirculate the fluid produced, it is necessary to cool it down. This can be achieved by installing ten circular fins per meter of pipe (see figure below). These fins have a thickness of 0.1...
A hot fluid passes through a thin-walled tube of 10-mm diameter at 18 kg/h at a...
A hot fluid passes through a thin-walled tube of 10-mm diameter at 18 kg/h at a temperature of 85 C. On the outside, coolant flows across the tube at a velocity of 3 m/s at a temperature of 25 C. Neglecting the thermal resistance of the metal wall, calculate 1. (a) The two heat transfer coefficients, (b) Overall heat transfer coefficient, and (c) Cooling rate (in W/m) achieved in the given configuration Assume hot fluid properties are constant at the...
A pipe contains a heated fluid at 777oC and the outside is at 25oC. What is...
A pipe contains a heated fluid at 777oC and the outside is at 25oC. What is the heat transfer per meter of steel (k=43 W/(m∙K)) pipe (kW/m) for a pipe whose inside diameter is 13 cm and outside diameter is 17 cm
Due to a particularly cold day, water that was transported to outdoor equipment through an uninsulated,...
Due to a particularly cold day, water that was transported to outdoor equipment through an uninsulated, thin-walled metal pipe began to freeze, which caused a cylindrical ice layer, 4 mm thick, to form on the inside of the pipe. If the pipe is 100 mm diameter with an internal convective coefficient of h = 1400 W/m2- K and a mean water temperature, Tm = 277 K, and the temperature of the inner surface of the ice, Tsi, is 273 K,...
4. (25 pts) Water is flowing inside a thin wall, smooth pipe of diameter 0.05 m...
4. (25 pts) Water is flowing inside a thin wall, smooth pipe of diameter 0.05 m at a mass flowrate of 0.3 kg/s. The water enters the pipe at a mean temperature Tm,i= 80 °C and exits at Tm,o= 80 °C while the pipe surface temperature is maintained at Ts= 20 °C along its entire length. a. Is the flow turbulent or laminar? b. Calculate the average convection heat transfer coefficient inside the tube. c. Calculate the length of the...
Steam at 150 °C flows in a stainless steel pipe which has a thermal conductivity of...
Steam at 150 °C flows in a stainless steel pipe which has a thermal conductivity of 16 W m-1 K -1 whose inner and outer diameters are 5 and 6 cm respectively. The pipe is covered with 3 cm think insulation having a thermal conductivity of 0.035 W m-1 K -1 . The combined convection and radiation heat transfer coefficient at the outside surface of the insulation is 20 W m-2 K -1 and the surroundings are at 10 °C....
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe...
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe having a diameter of 187 mm and a length of 1 m and maintaining the pipe surface temperature of 96.C. The fluid is entering the pipe at a temperature of 25 C and leaving with a temperature of 76C, take Prandtl number as 12. The density and viscosity of the fluid are 1210 kg/m?, 1 x10Ns/m respectively and its thermal conductivity is 5x102 w/mk....
3. Heat Transfer Mechanism: (Total points 30 Suppose copper pipe in a parabolic concentrator is c...
3. Heat Transfer Mechanism: (Total points 30 Suppose copper pipe in a parabolic concentrator is carrying heat transfer fluid (HTF) of 450 °C. The ambient temperature is 25 °C. The pipe has a diameter of 5 cm but the pipe wall thickness is 3 mm. Determine the rate of heat conduction through the pipe wall per unit area of wa Copper has thermal conductivity k-400 w/m.К. (Points 10) If the pipe temperature is same as that of fluid inside, calculate...
Problem
:
A cryogenic flui
d is flowing in a
304 SS
pipe.
The pipe is insulated
on its outside surface
with
6
-
mm thick,
evacuated,
aluminum foil/glass mat insulation.
(“Evacuated” means a partial vacuum is drawn on the
insulation to
remove air that would otherwise fill
pores inside the insulation.)
The pipe
inside diameter
is 127 mm; it’s outside diameter is 138 mm.
The
fluid temperature is
-
173
o
C
.
T
he
air temperature
outside the...
Help mee!!
Q1. Heat conduction & convection (38 pt). Hot water flows in a steel pipe of 0.1 m inside diameter at a flow rate of 0.2 m/h and at an average temperature of 70 °C. The pipe length is 2.5 m and the inside pipe wall temperature is 60 °C Assume that the pipe thickness is small and the steel heat conductivity is high enough so that the thermal resistance of the pipe wall is negligible. Calculate: (a) The...
I. Design of Fins (35 pt). A stripping process produces a hot fluid (80°C) that flows inside copper pipe of 20 cm diameter (the thickness of the pipe wall is negligible). Outside the pipe, there is air flow at ambient temperature (20 °C). In order to recirculate the fluid produced, it is necessary to cool it down. This can be achieved by installing ten circular fins per meter of pipe (see figure below). These fins have a thickness of 0.1...
A hot fluid passes through a thin-walled tube of 10-mm diameter at 18 kg/h at a temperature of 85 C. On the outside, coolant flows across the tube at a velocity of 3 m/s at a temperature of 25 C. Neglecting the thermal resistance of the metal wall, calculate 1. (a) The two heat transfer coefficients, (b) Overall heat transfer coefficient, and (c) Cooling rate (in W/m) achieved in the given configuration Assume hot fluid properties are constant at the...
Due to a particularly cold day, water that was transported to outdoor equipment through an uninsulated, thin-walled metal pipe began to freeze, which caused a cylindrical ice layer, 4 mm thick, to form on the inside of the pipe. If the pipe is 100 mm diameter with an internal convective coefficient of h = 1400 W/m2- K and a mean water temperature, Tm = 277 K, and the temperature of the inner surface of the ice, Tsi, is 273 K,...
4. (25 pts) Water is flowing inside a thin wall, smooth pipe of diameter 0.05 m at a mass flowrate of 0.3 kg/s. The water enters the pipe at a mean temperature Tm,i= 80 °C and exits at Tm,o= 80 °C while the pipe surface temperature is maintained at Ts= 20 °C along its entire length. a. Is the flow turbulent or laminar? b. Calculate the average convection heat transfer coefficient inside the tube. c. Calculate the length of the...
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe having a diameter of 187 mm and a length of 1 m and maintaining the pipe surface temperature of 96.C. The fluid is entering the pipe at a temperature of 25 C and leaving with a temperature of 76C, take Prandtl number as 12. The density and viscosity of the fluid are 1210 kg/m?, 1 x10Ns/m respectively and its thermal conductivity is 5x102 w/mk....
3. Heat Transfer Mechanism: (Total points 30 Suppose copper pipe in a parabolic concentrator is carrying heat transfer fluid (HTF) of 450 °C. The ambient temperature is 25 °C. The pipe has a diameter of 5 cm but the pipe wall thickness is 3 mm. Determine the rate of heat conduction through the pipe wall per unit area of wa Copper has thermal conductivity k-400 w/m.К. (Points 10) If the pipe temperature is same as that of fluid inside, calculate...
Most questions answered within 3 hours.
-
Using technology to support HR activities increases:
a.
the efficiency of the administrative HR functions.
b....
asked 15 seconds ago -
1. List the features used to classify leaf
types.
2. List some characteristics that are shared...
asked 5 minutes ago -
The three elements of Value Proposition, Key Customers, and
Capabilities operate within an environment. Which of...
asked 7 minutes ago -
Katelynn, a physician, earns $200,000 from her medical practice
in the current year. She receives $45,000...
asked 15 minutes ago -
Each row of the table below describes an aqueous solution at
25°C
.
The second column...
asked 19 minutes ago -
A horizontal wire is at y = 0. Current travels in the +x
direction. The magnetic...
asked 20 minutes ago -
Let X be a continuous random variable whose PDF is Let X be a
continuous random...
asked 41 minutes ago -
Martinez Company’s relevant range of production is 7,500 units
to 12,500 units. When it produces and...
asked 39 minutes ago -
A football with a mass of 1.2 kg is kicked from ground level to
a height...
asked 44 minutes ago -
Remember: Changes in supply determinants shift supply, and
changes in demand determinants shift demand. We say...
asked 43 minutes ago -
Why is the answer b), for this question? I came up with C) for
my incorrect...
asked 49 minutes ago -
Suppose that you know that in the population of full-time
employees in the United States, the...
asked 1 hour ago