The maximum load that can safely be supported by a rope in an overhead hoist is 471.5. What is the maximum acceleration that can safely be given to a 31.96kilogram object being hoisted vertically upward?
The maximum load that can safely be supported by a rope in an overhead hoist is...
6. Determine the largest load P that can be safely supported by a steel plate with a hole of diameter 10 mm and thickness is 10 mm. The width of the plate is 40mm. Assume an allowable normal stress of 160 MPa. (10)
A 15.0 kg mass is hoisted using a rope that passes over a single frictionless pulley of negligible mass. If the mass accelerates upward with an acceleration of 1.25 m/s2, what force is being exerted on the rope.
Determine the largest axial load P that can be safely supported by a flat steel bar consisting of two portions, both 10 mm thick and respectively, 40 and 60 mm wide, connected by fillets of radius r=8 mm. Assume the maximum allowable normal stress is 165 MPa. D/d = 2 13 0.3 2r/D 0.4 0.5 0.6 0 0.1 0.2 a) Flat bars with holes 0.7 O 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 0.22 0.24 0.26 0.28...
A load of bricks with mass = 15.0 hangs from one end of a rope that passes over a small, frictionless pulley. A counterweight of mass = 27.6 is suspended from the other end of the rope, as shown in the figure. The system is released from rest. 1)What is the magnitude of the upward acceleration of the load of bricks? 2)What is the tension in the rope while the load is moving?
4) [10 marks] A steel cable is being used to hoist a load of mass Mload 3.3 metric tons through a vertical height L. The steel cable has mass density p 7600kgm3 and tensile strength S-2.5 x 108 Pa. For safety reasons, the stress in the cable (that is the force per unit area) must not exceed Smax - 0.8S. In this question, the mass of the cable cannot be neglected . First assume that the cable has uniform cross-sectional...
1300 kg steel beam is supported by two ropes. Each rope has a maximum sustained tension of 6400 N. What is the tension in both ropes? Does either rope break?
Consider the truss If the roller at B can sustain a maximum load of 3KN. determine the largest magnitude of each of the three forces F that can be Supported by the truss.
4. Determine the maximum uniform distributed load w0 that can be supported by the wood beam reinforced by the steel channel if the allowable of stress for the steel is 1.4 ksi and the allowable stress for the wood is 77 psi. Esi = 29(10) ksi, Ew = 1600 ksi. wo 4 in. Hos in 8 ft 8 ft 15 in. M = 850 lb-ft 0.5 in. 0.5 in.
A truck is towing a 1200 kg car. The rope being used can only with stand a tension of 800 N a. How much work does the truck do in towing the car 20m? b. What is the maximum acceleration of the truck before the rope breaks?
An elevator cab has a mass of 4510 kg and can carry a maximum load of 1810 kg. If the cab is moving upward at full load at 3.90 m/s, what power is required of the force moving the cab to maintain that speed?