Part A g e Powerper Phase Express you to the significant figures and includer e Learning...
Please answer ALL PARTS of this question. 1) Calculate the three line currents . Enter its magnitude in A 2) Calculate the three line currents . Enter its phase angle in degrees 3) Calculate the phase voltage at terminal of the load. Enter its magnitude in V 4) Calculate the phase voltage at terminal of the load. Enter its phase angle in degrees 5) Calculate the line voltage at the load. Enter its magnitude in V 6) Calculate the line...
Analysis of a Balanced Wye-Wye Circuit w Review Learning Goat: To yanaye a balanced thre e we wye Guit including equivalent outline currents phase voltages at the generator and at the load, and in voltages at the formats of the generator and of the load Atalanced, Tre phase, y connected generator with positive sequence has an impedance of 0.15+ and an internal voltage of 120 V / The generator ads a balanced the s e Y-connected to 34+ / The...
Question 2: Three phase circuit. (100p) A wye connected generator supplies a delta connected balanced load through short feeder. seree the load line to neutral voltage as reference voltage phase angle zero. 02.1 Q2.2 Q2.3 Q2.4 Draw the equivalent circuit. 10p Calculate the load line-to-neutral voltages and line-to-line voltages. 20p Calculate the delta load currents and feeder currents. 20p Calculate the supply wye connected generator line-to-neutral voltages. Is the obtained values are acceptable? Calculate the generator real and reactive power...
I. A balanced three-phase positive sequence wye-connected 60Hz source voltage has line-neutral voltage of V, 1000 V. It is connected to a three- phase wye connected load whose impedance is z 50+j37.7 2 a. Find line currents ia ib, ic and line-line voltages Vab, Vbo Vac b. Find the total complex power delivered to the load. c. Find delta-connected capacitor bank needed to bring the PF to 0.95 (lagging) of system. d. Re-calculate currents la, ib, io with Case c....
I. A balanced three-phase positive sequence wye-connected 60Hz source voltage has line-neutral voltage of V, 1000 V. It is connected to a three- phase wye connected load whose impedance is z 50+j37.7 2 a. Find line currents ia ib, ic and line-line voltages Vab, Vbo Vac b. Find the total complex power delivered to the load. c. Find delta-connected capacitor bank needed to bring the PF to 0.95 (lagging) of system. d. Re-calculate currents la, ib, io with Case c....
7. A balanced three-phase Y-connected generator with positive sequence has an impedance of 0.2+ 20.5 216 and an internal voltage of 220 V/6. The generator feeds a balanced three-phase Y-connected load having an impedance of 39 + j28 /6. The impedance of the line connecting the generator to the load is 0.8 +j1.5 /6. The a-phase internal voltage of the generator is specified as the reference phasor. (a) Construct the a-phase equivalent circuit of the system. (5 points) (b) Calculate...
2. Two balanced three-phase loads are connected in parallel. One load with per phase impedance 21 ?, is connected in delta, and the other load has per phase impedance 15 2 and is connected in wye. Ignore the line impedance. If the line voltage is a 208230° Vrms, determine (a) the phase voltage for phase-a, ) the line current Ia*, (c) the phase currents in the delta load (d) the complex power of the load and the power factor.
Sketch the 3-phase systems, and show your calculations: Problem (a): A positive-sequence balanced thrcc-phase wyc-connected source supplics powcr to a balanced wyc-connected load. The line voltage is 100 V. The line impedance is 2 ? per phase, and the load impedance is 50 +j30 ? per phase. Determine the load voltages if V an-00. Problem (b): A positive-sequence balanced three-phase wye-connected source supplies power to a balanced wye-connected load. The magnitude of the line voltages is 208 V rms. If...
508 CHAPTER 11 . POLYPHASE CIRCUITS 11.40 In a balanced three-phase system, the source has an aboc phase-sequence and is connected in delta. There are two rallel wye-connected loads. The phase impedance of load i and load 2 is 4 The line impedance connecting the source to the loads is 0.3 + j0.2 2. If the curre IAN! = 10/20-Arms, find the delta currents in the source 4 Ω and 10 +/4 Ω, respectively. nt in the a phase of...
1. The phase voltage at the terminals of a balanced three-phase Y-connected load has an amplitude of 120V. The load has an impedance of 39 + j28Ω per phase. It is fed from a line having an impedance of 0.8 + j1.5 Ω per phase. The Y-connected source at the sending end of the line has an internal impedance of 0.2 + j0.5 Ω per phase. Calculate: a) The three line currents b) The three-phase voltages at the load c) ...