For the given blanking operation and sheet dimensions, we need to find the appropriate punch and die sizes. In case (b) we need to find the blanking force required corresponding to given shear strength of the steel as follows.
Please don't forget to rate the answer positively by giving thumbs up. Thank you have a great day......
4. A blanking operation is performed on 5/32-in-thick cold-rolled steel (half hard). The part is circular...
8. Sheet Metal Drawing Review Problem A deep drawing operation is performed to produce a cylindrical cup in which the inside diameter D 4.25 in and height h 2.65 in. Stock thickness 3/16 in, and blank diameter D, 7.7 in. Punch and die radii R, R 5/32 in. The metal has a tensile strength TS 65,000 lb/in2, yield strength Y- 32,000 Ib/in2, and shear strength S 40,000 lb/in2. Determine the (a) drawing ratio, (b) reduction, (c) drawing force, and (d)...
2. A blanking die must be designed to blank the part outline shown in Figure below. The material is 4- mm-thick stainless steel (half hard, Ac = 0.075). Determine the (a) dimensions of the blanking punch and the die opening and (b) cutting force required, given that the stainless steel has a shear strength = 450 MPa. Justify 50– 25- 85
Part 1
A cantilever flexural member is fabricated by bolting two
identical cold-rolled steel channels back-to-back, as shown. The
cantilever beam has a span of L = 1300 mm and supports a
concentrated load of P = 500 N. The cross-sectional
dimensions of the built-up shape are shown, where d = 40
mm, w = 65 mm, and t = 3 mm. The effect of the
rounded corners can be neglected in determining the section
properties for the built-up shape....
10. Write a one-page summary of the attached paper? INTRODUCTION Many problems can develop in activated sludge operation that adversely affect effluent quality with origins in the engineering, hydraulic and microbiological components of the process. The real "heart" of the activated sludge system is the development and maintenance of a mixed microbial culture (activated sludge) that treats wastewater and which can be managed. One definition of a wastewater treatment plant operator is a "bug farmer", one who controls the aeration...