A rigid tank is filled with 260 kg of saturated liquid water at 200°C. A valve...
A 0.3 m3 rigid tank is filled with saturated liquid water at 200°C. A valve at the bottom of the tank is opened, and liquid is withdrawn from the tank. Heat is transferred to the water such that the temperature in the tank remains constant. Determine the amount of heat that must be transferred by the time 2 of the total mass has been withdrawn. a. Hint: The phase of the water when / of the mass has exited is...
please solve with energy equation. why is there no kinetic energy ? why is mout•h1 used ? 5–123 A 0.3-mº rigid tank is filled with saturated liquid water at 200°C. A valve at the bottom of the tank is opened, and liquid is withdrawn from the tank. Heat is transferred to the water such that the temperature in the tank remains con- stant. Determine the amount of heat that must be transferred by the time one-half of the total mass...
(1 point) A rigid, insulated 0.43 m tank initially contains saturated water liquid at 362 kPa. The tank is connected to a steam pipe line carrying steam at 1.53 MPa and 305 °C through a valve. When the valve is opened, steam enters the tank from the pipe. When the valve is closed, the tank is filled with a saturated vapor with a pressure of 0.8 MPa. How much mass was added to the tank during this process?
Needh help with this A 200-m' rigid tank is filled with saturated liquid-vapor mixture of water at 50°C. If 10% of the mass is liquid and the rest is vapor, find the total mass in the tank. If heat is added in and the mixture becomes saturated vapor, find the pressure.
A 160 m3 rigid tank is filled with saturated liquid-vapor mixture of water at 50oC. 70% of the mass is vapor and the 30% of the mass is liquid. The mixture is then heated until its pressure is 50kPa. Determine the final temperature(oC).
Two rigid tanks filled with water are connected by a valve. Tank A has a pressure of 40.9 psia, a specific volume of 17.52 ft3lbm, and a volume of 22.2 ft3. Tank B contains 5 lbm of water at 80 psia and 443∘F. What is the volume of tank B? ft3 The valve is opened and the two tanks reach an equilibrium state. (Assume the valve does not occupy any additional volume.) What is the specific volume of the water...
A 1-mº rigid tank contains 100 kg R-134a at a temperature of 16 °C. A valve on top of the tank is opened, and saturated vapor is allowed to escape through a throttle to a collector system at 100 kPa. During the process the temperature inside the tank remains at 16 °C by heat transfer from the 20 °C surroundings. The valve is closed when no more liquid remains inside the tank. Calculate the heat transfer to the tank and...
(4 points) A-C line Liquid R-134a A rigid container containing 6.8 kg of saturated liquid R-134a at 26°C is used to fill an air- conditioning system. A valve is opened and allows liquid R-134a to escape the tank into the A-C line until only 0.85 kg of R-134a remains in the tank, at which point the valve is closed. During the process, heat transfer is allowed to occur to maintain the tank temperature at 26 °C. What is the quality...
In a well-insulated rigid tank which contains 2 kg of a saturated liquid-vapor mixture of water at 200 kPa, 40% of the mass is in the liquid phase. A heater is providing heat to the content of the tank so that all liquid phase converts to vapor phase. Calculate the entropy change of water in this process.
A rigid tank contains 2.0 kg saturated liquid water at 60 C, then 25 kJ of heat was added to it while being stirred with a paddle which resulted in adding 30 kJ of wok, what is the final internal energy (kJ) of the water?