minimum tensional force requred =38.4N
Suppose you’re building a contraption which contains a solid rod of length L = 13.1 m and mass 3.8 kg. This rod has its lower end barely above the ground at an angle of 24 degrees with respect to the horizontal, and is ultimately held up by a rope connected at a distance L/4 from the top of the rod making an angle of 28.3 degrees with respect to the rod. The top of the rod may rotate as it...
A rod uniform and homogeneous AB of length L=4.00 m is attached
to a wall as shown and secured via a massless rope BC of length
l=5.00 ml=5.00 m to the wall (see Fig. 4). A mass M1=40.0 kg is
attached to the rod at B. The rod itself has a mass M=2.00 kg.
Assume that the tension in the string is T. Hint - set up the two
force equations (along x and y axes) and the torque equation....
a sign of mass 20.0 kg is supported at the end of a uniform beam of mass 10.0 kg and length 2.00!m. the beam makes an angle of 30.0 degrees with the horizontal. a wire is attached from the end of the rod to a point on the wall and makes an angle if 20.0 degrees to the horizontal. what is the tension of the wire. what are the magnitudes of the horizontal and vertical components of the reaction force...
A uniform bar of length 3.9 m and mass 4.2 kg is attached to a wall through a hinge mechanism which allows it to rotate freely. The other end of the bar is supported by a rope of length 5.1 m which is also connected to the wall as shown above. What is the tension in the rope in N?
A mass m1=5.0 kg hangs suspended by a rope from an elevator ceiling. A second mass m2=5.0 kg hangs suspended by a rope from the bottom of mass m1. Starting from rest, the elevator ascends, attaining its maximum speed of 1.8 m/s in 0.80 s. The elevator travels with this constant speed for 5.0 s, undergoes a uniform negative acceleration for 1.5 s, and then comes to rest. Draw a FBD for each mass Find the tension in each rope...
2) See Figure 2. A 35 kg sign is suspended from the end of a uniform horizontal beam that has a mass of 25 kg and a length of 3.0 m. The beam is attached to a wall by a hinge. A cable with negligible mass is attached to the end of the beam just above the sign and extends to the wall, forming an angle of 30° with the beam. cable beam Physics is Phun Figure 2 a) Sketch...
Mass M1 = 4 kilograms is suspended on a massless frictionless
pulley and is connected with a massless rope to Mt = 2 kg, a mass
on a frictionless table. Mt is attached to another suspended mass
M2 = 6 kg with a massless rope over a massless frictionless pulley.
(diagram attached)
Find the velocity of each of the masses when M2 falls 20 cm.
What is the acceleration of the system?
DE
rni 0 A block of mass m1- 21.9 kg is at rest on a plane inclined at 28.0 above the horizontal. The block is connected via a rope and mass less pulley system to another block of mass m2-24.1 kg, as shown in the figure. The coefficient kinetic friction between block 1 and the inclined plane is μ,-0.15. If the blocks are released from rest, what is the acceleration of m2? what is a tension force T on the rope?
10. A piñata of mass 10.00 kg is suspended from the ceiling by means of three ropes, as shown in the diagram. Find the tension in the left rope, right rope, and bottom rope if the angle a = 33.00° and B 18.00°. Assume that the acceleration due to gravity is 9 = 9.800 1 m s? 8 В 11. Tallula, who has a mass of 60.0 kg, is in a spaceship located 1055 km above the surface of the...
See Figure 2. A 35 kg sign is suspended from the end of a uniform horizontal beam that has a mass of 25 kg and a length of 3.0 m. The beam is attached to a wall by a hinge. A cable with negligible mass is attached to the end of the beam just above! the sign and extends to the wall, forming an angle of 30° with the beam. cable beam Physics is Phun Figure 2 WT 1173337 a)...