Feel free to ask your doubts in the comment section if any.
Please like my work.
Pump Curve and System Curve W = 1500 RPM 120.00 110.00 100.00 90.00 80.00 E 70.00...
Question 6 a) Differentiate between a pump-head capacity curve and system-head capacity curve. [2 Marks] b) A pump has the characteristics listed in the Table Q6 (b) when operated at 1170 rpm. i. Develop head-capacity curves for a pump operated at 870 and 705 rpm. [4 Marks] Hence or otherwise, determine the head at 870 rpm corresponding to Q = 0.44 m3/s. [2 marks] Table Q6 (b) Capacity(m/s) Efficiency (%) 0.0 0.1 0.2 0.3 0.4 Head(m) 40.0 39.0 36.6 34.4...
When a water pump was tested at a rotation rate of 1500 rpm, the following data was obtained: Q (I/s) 0 10 20 30 40 50 H(m) 10.0 10.5 10.0 8.5 6.0 2.5 n (%) 0 0.40 0.64 0.72 0.64 0.40 It is proposed to use this pump to draw water from an open well and deliver it to a tank 5.5 m above. The delivery pipe is 20.0 m long and 100 mm diameter, and has a friction factor...
(100 points) Water at 25°C is pumped at a rate of 0.075m'/s from a reservoir 20m above a pump to a free discharge (this means discharged to atmosphere) 35m above the pump. The pressure on the intake side of the pump is 150kPa and the pressure on the discharge side of the pump is 450kPa. The pipe between the reservoir and the pump is 3 meters of 5in diameter cast iron. From the pump to the discharge the pipe is...
(100 points) Water at 25°C is pumped at a rate of 0.075m's from a reservoir 20m above a pump to a free 1. discharge (this means discharged to atmosphere) 35m above the pump. The pressure on the intake side of the pump is 150kPa and the pressure on the discharge side of the pump is 450kPa. The pipe between the reservoir and the pump is 3 meters of Sin diameter cast iron. From the pump to the discharge the pipe...