Homework Answers
Add Answer to:
A stainless steel block (H 0.1 m and k 16 W/(m K)) that is perfectly insulated...
A large stainless steel (AISI 316) plate having a thickness of 5 mm is initially at...
A large stainless steel (AISI 316) plate having a thickness of 5 mm is initially at a temperature of 70°C, and both sides of the plate are suddenly exposed to a convection environment at 20°C with the heat transfer coefficient of h= 800 W/m 2 oC. What will be the center and surface temperatures of the plate after 10 s? For stainless steel (AISI 316), α = 348x10-6 m2/s and k = 13.4 W/m K.
Q2 (a) A 12 mm diameter mild steel sphere (k = 42.5 W/m K) is exposed...
Q2 (a) A 12 mm diameter mild steel sphere (k = 42.5 W/m K) is exposed to cooling airflow at 27 "C resulting in the convective coefficient, h = 114 W/m' K. The relevant properties of mild steel are given as follows: Density p= 7850 kg/m . Specific heat c = 475 J/kg K and thermal diffusivity a = 0.043 m/hr Determine: (i) Time required to cool the sphere (lumped parameter system) from 540 °C to 95°C. [7 marks] (ii)...
Heat transfer bla 5 Consider a stainless steel spoon(k = 15.1 W/m.K), partially immersed in the...
Heat transfer
bla 5 Consider a stainless steel spoon(k = 15.1 W/m.K), partially immersed in the (4 boiling water at 95°C in a kitchen at 25°C. The handle of the spoon has a cross-section 0.2 cm x 1 cm and it extends 18 cm in the air from the free surface of the water. If the heat transfer coefficient on the exposed surface of the spoon is 15 W/m2.K, calculate the temperature difference across the exposed surface of the spoon...
Consider a stainless steel spoon (k= 15.1 W/m·C) that is partially immersed in boiling water at...
Consider a stainless steel spoon (k= 15.1 W/m·C) that is partially immersed in boiling water at 95°C in a kitchen at 25°C. The handle of the spoon has a cross section of about 0.2 cm x 1 cm and extends 18 cm in the air from the free surface of the water. The spoon loses heat by convection to the ambient air with an average heat transfer coefficient of h = 13 W/m2. Assuming steady one-dimensional heat transfer along the...
H8-1: An 8-m-internal-diameter spherical tank made of 1.5-cm-thick stainless steel (k-15 W/m K) i...
H8-1: An 8-m-internal-diameter spherical tank made of 1.5-cm-thick stainless steel (k-15 W/m K) is used to store iced water at 0°C. The tank is located in a room whose temperature is 25°C. The convection heat transfer coefficients at the inner and the outer surfaces of the tank are 80 W/m2 K and 10 W/m2 K, respectively. Radiatior heat transfer is negligible. Determine the rate of heat transfer to the iced water in the tank. room 25°0c T. Iced water 0...
3. Two gray-diffuse spheres have properties and temperatures shown below. R and R2 are 0.1 m and 0.3 m respectively. (i...
3. Two gray-diffuse spheres have properties and temperatures shown below. R and R2 are 0.1 m and 0.3 m respectively. (i) Compute heat transfer rate of sphere 1, q W]. Also, to minimize the heat loss, you decide to put a radiation shield in between the two spheres. (ii) Where do you prefer to place the radiation shield, i.e., close to sphere 1 or sphere 2 or right in the middle? (iii Somehow you place the radiation shield with R3...
How much power (power is the energy per second) is radiated by the person
Radiation of Energy The rate of heat transfer by emitted radiation is determined by the Stefan-Boltzmann law of radiation: = aeAT4 where o 5.67x10-8 J/s - m2 K is the Stefan-Boltzmann constant, A is the surface area of the object, and T is its absolute temperature in kelvin. The symbol e stands for the emissivity of the object, which is a measure of how well it radiates An ideal jet-black (or black body) radiator has e 1,whereas a perfect reflector has...
Problem 2: A stainless steel rod (k-21 W/m-K, p-8000 kg/m3, C,,-570 J/kg-K) with diameter D-10 mm is heat-treated as it...
Problem 2: A stainless steel rod (k-21 W/m-K, p-8000 kg/m3, C,,-570 J/kg-K) with diameter D-10 mm is heat-treated as it passes through a furnace at a speed of 2 cm/s. The furnace has a convection coefficient of 80 W/m2-K and an air temperature of 900°C. The furnace is 3 m long, and the stainless steel enters at 20°C. (a) Using a control volume of length S traveling with the rod, develop a differential equation for the rate of change of...
The rate of heat transfer by emitted radiation is determined by the Stefan-Boltzmann law of radiation...
The rate of heat transfer by emitted radiation is determined by the Stefan-Boltzmann law of radiation = ceAT4 t where a 5.67x108 J/(s m2. K4) is the Stefan-Boltzmann constant, A is the surface area of the object, and T is its absolute temperature in kelvin. The symbol e stands for the emissivity of the object, which is a measure of how well it radiates. An ideal jet-black (or black body) radiator has e 1, whereas a perfect reflector has e...
3. A water heater is covered with insulation boards over a total surface area of 3...
3. A water heater is covered with insulation boards over a total surface area of 3 m. The board is 5.3 centimeter thick. The inside board surface is at 69'C, and the board material has a conductivity of 0.08 W/m-K. If the heat loss is 200 W, determine the outside surface temperature. Given A= 3m? T= 69°C Tonto? K= 0.08 W/mk Q=2oow 4. Determine the total rate of heat transfer from a person standing in a breezy room at 20°C...
A large stainless steel (AISI 316) plate having a thickness of 5 mm is initially at a temperature of 70°C, and both sides of the plate are suddenly exposed to a convection environment at 20°C with the heat transfer coefficient of h= 800 W/m 2 oC. What will be the center and surface temperatures of the plate after 10 s? For stainless steel (AISI 316), α = 348x10-6 m2/s and k = 13.4 W/m K.
Q2 (a) A 12 mm diameter mild steel sphere (k = 42.5 W/m K) is exposed to cooling airflow at 27 "C resulting in the convective coefficient, h = 114 W/m' K. The relevant properties of mild steel are given as follows: Density p= 7850 kg/m . Specific heat c = 475 J/kg K and thermal diffusivity a = 0.043 m/hr Determine: (i) Time required to cool the sphere (lumped parameter system) from 540 °C to 95°C. [7 marks] (ii)...
Heat transfer
bla 5 Consider a stainless steel spoon(k = 15.1 W/m.K), partially immersed in the (4 boiling water at 95°C in a kitchen at 25°C. The handle of the spoon has a cross-section 0.2 cm x 1 cm and it extends 18 cm in the air from the free surface of the water. If the heat transfer coefficient on the exposed surface of the spoon is 15 W/m2.K, calculate the temperature difference across the exposed surface of the spoon...
Consider a stainless steel spoon (k= 15.1 W/m·C) that is partially immersed in boiling water at 95°C in a kitchen at 25°C. The handle of the spoon has a cross section of about 0.2 cm x 1 cm and extends 18 cm in the air from the free surface of the water. The spoon loses heat by convection to the ambient air with an average heat transfer coefficient of h = 13 W/m2. Assuming steady one-dimensional heat transfer along the...
H8-1: An 8-m-internal-diameter spherical tank made of 1.5-cm-thick stainless steel (k-15 W/m K) is used to store iced water at 0°C. The tank is located in a room whose temperature is 25°C. The convection heat transfer coefficients at the inner and the outer surfaces of the tank are 80 W/m2 K and 10 W/m2 K, respectively. Radiatior heat transfer is negligible. Determine the rate of heat transfer to the iced water in the tank. room 25°0c T. Iced water 0...
3. Two gray-diffuse spheres have properties and temperatures shown below. R and R2 are 0.1 m and 0.3 m respectively. (i) Compute heat transfer rate of sphere 1, q W]. Also, to minimize the heat loss, you decide to put a radiation shield in between the two spheres. (ii) Where do you prefer to place the radiation shield, i.e., close to sphere 1 or sphere 2 or right in the middle? (iii Somehow you place the radiation shield with R3...
Radiation of Energy The rate of heat transfer by emitted radiation is determined by the Stefan-Boltzmann law of radiation: = aeAT4 where o 5.67x10-8 J/s - m2 K is the Stefan-Boltzmann constant, A is the surface area of the object, and T is its absolute temperature in kelvin. The symbol e stands for the emissivity of the object, which is a measure of how well it radiates An ideal jet-black (or black body) radiator has e 1,whereas a perfect reflector has...
Problem 2: A stainless steel rod (k-21 W/m-K, p-8000 kg/m3, C,,-570 J/kg-K) with diameter D-10 mm is heat-treated as it passes through a furnace at a speed of 2 cm/s. The furnace has a convection coefficient of 80 W/m2-K and an air temperature of 900°C. The furnace is 3 m long, and the stainless steel enters at 20°C. (a) Using a control volume of length S traveling with the rod, develop a differential equation for the rate of change of...
The rate of heat transfer by emitted radiation is determined by the Stefan-Boltzmann law of radiation = ceAT4 t where a 5.67x108 J/(s m2. K4) is the Stefan-Boltzmann constant, A is the surface area of the object, and T is its absolute temperature in kelvin. The symbol e stands for the emissivity of the object, which is a measure of how well it radiates. An ideal jet-black (or black body) radiator has e 1, whereas a perfect reflector has e...
3. A water heater is covered with insulation boards over a total surface area of 3 m. The board is 5.3 centimeter thick. The inside board surface is at 69'C, and the board material has a conductivity of 0.08 W/m-K. If the heat loss is 200 W, determine the outside surface temperature. Given A= 3m? T= 69°C Tonto? K= 0.08 W/mk Q=2oow 4. Determine the total rate of heat transfer from a person standing in a breezy room at 20°C...
Most questions answered within 3 hours.
-
S sells property with a $500 basis to B for $450, and B later
sells the...
asked 15 minutes ago -
On January 1, 20X7, Green Corp. paid $1,020,000 to acquire Wax
Co. Wax maintained separate incorporation....
asked 17 minutes ago -
C++
Write a class Fraction that defines adding, subtracting,
multiplying, and dividing fractions by overloading standard...
asked 1 hour ago -
This java code won't run and I can't figure out the problem with
it. Please help...
asked 2 hours ago -
Trace the following recursive methods:
a) isPal with the string “abccda”
b) isAnBn with the string...
asked 3 hours ago -
1. Which of the following is false about photosynthesis?
A. ATP is the molecule used to...
asked 4 hours ago -
A simple random sample of size n=64 is obtained from a
population with a mean of...
asked 5 hours ago -
(2 dimensions, 1 object, 2 accelerations)
1) A projectile is thrown with a wind. The wind...
asked 6 hours ago -
Brian makes $34,100 per year. How much can Brian expect to
contribute to FICA taxes in...
asked 6 hours ago -
To buy a new house you must borrow $155,000. To do this you take
out a...
asked 7 hours ago -
Spacely Sprockets is evaluating the construction of a new plant
on land the company purchased for...
asked 8 hours ago -
1. Consider a linear regression model of y on K regressors and
an intercept.
(i) Describe...
asked 8 hours ago