Q9: What would the RPM be if we were turning a 375 diameter workpiece made out...
For a turning of a hot rolled free machining steel with BHN=200, you have selected a high-speed steel (HSS) tool and a depth of cut of 0.150 in. The diameter of the workpiece is 2.00 in. (a) What speed and feed would you select for this job? (b) Using a speed of 115 sfpm and the feed of 0.015 ipr, calculate the spindle RPM for this operation. (c) Calculate the metal removal rate MMR. (d) Calculate the cutting time for...
During a turning operation on a lathe using a grooved tool, the following forces were recorded: Group 1 2 3 4 5 6 Feed force, Fx (kN) 1.70 1.68 1.59 1.75 1.67 1.64 Radial force, Fy (kN) 1.32 1.39 1.44 1.42 1.45 1.38 Tangential force, Fz (kN) 2.18 2.37 2.38 2.32 2.29 2.33 The machine set-up includes a feed (s) of 0.24 mm/rev. and the depth of cut (d) of 2.5 mm. Tool rake angle () = - 6 deg....
Question 1 A turning operation is carried out on aluminum. Based on the specific energy values in Table 20.2, determine material removal rate and cutting power in the operation under the following sets of cutting conditions: (a) Cutting speed 5.6 m/s, feed 0.25 mm/rev, and depth of cut 2.0 mm; and (b) cutting speed- 1.3 m/s, feed 0.75 mm/rev, and depth 4.0 mm. Question 2 Consider a turning operation performed on steel whose hardness 225 HB at a cutting speed...