4. Refrigerant- 134a enters an adiahaticpressor as saturated vapor at 240°C and leaves at 09 MIPa...
Refrigerant-134a enters a diffuser as saturated vapor at 800kpa with a velocity of 120m/s, and leaves the device at 900kpa and 40^C. The R-134a is gaining energy by heat transfer at a rate of 2kW as it passes through the diffuser. If the exit area is 80% greater than the inlet area, determine the exit velocity m/s, and the mass flow rate kg/s.
1 MPa Isentropic Efficiency of a Compressor Refrigerant-134a enters an adiabatic compressor as a saturated vapor at 100kPa at a rate of 0.7 m/min and exits at 1-MPa pressure. The isentropic efficiency of the compressor is 87%. R-134a Compressor Isentropic Compressor Work hs-h 100 kPa sat. vapor Actual Compressor Work Determine the refrigerant properties at the inlet and outlet for an isentropic process. Actual 2s entropic procEss Inlet state Determine the actual isentropic enthalpy from the efficiency. (Ans: 289.71 J/kg)...
Refrigerant 134a is the working fluid in an ideal vapor-compression refrigeration cycle. Saturated vapor enters the compressor at h = 400 J/kg and saturated liquid leaves the condenser at h= 242 J/kg. If the mass flow rate of the refrigerant is 0.08 kg/s, and superheated vapor exits the compressor at h = 420 J/kg, pression work will be equal to 1.6 kW inch-h) 6.08(420 - 6oo) = 1.6
Problem #2 Refrigerant 134a enters an adiabatic compressor at 0.1 MPa and -20 oC while it leaves at 1 MPa and 110 oC. The mass flow rate of the compressor is 0.3 kg/s. Determine: a) The power input to the compressor, in kW. b) The volume flow rate of the refrigerant at the compressor inlet.
6-17 Refrigerant-134a enters the compressor of a refrig- cration system as saturated vapor at 0.14 MPa and leaves as superheated vapor at 0.8 MPa and 60°C at a rate of 0.06 kg/s. Determine the rates of energy transfers by mass into and out of the compressor. Assume the kinetic and potential cncrgics to be negligible.
An ideal vapor-compression refrigerant cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated vapor enters the compressor at -10°C, and saturated liquid leaves the condenser at 28°C. The mass flow rate of refrigerant is 5 kg/min. Determine (a) The compressor power, in kW (b) The refrigerating capacity, in tons. (c) The coefficient of performance. Sketch the system on a T-s diagram with full label. A vapor-compression heat pump with a heating capacity of 500 kJ/min is...
Refrigerant 134a enters a compressor with a mass flow rate of 15 kg/s with a velocity of 10 m/s. The refrigerant enters the compressor as a saturated vapor at 10°C and leaves the compressor at 1400 kPa with an enthalpy of 281.39 kJ/kg with a negligible velocity. The rate of work done on the refrigerant is measured to be 380 kW. If the elevation change between the compressor inlet and exit is negligible, determine the rate of heat transfer associated...
Problem 4.041 SI Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°C with a volumetric flow rate of 0.18 m3/s. Refrigerant exits at 9 bar, 70°C. Changes in kinetic and potential energy from inlet to exit can be ignored. Determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kW.
1) A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30°C by rejecting its waste heat to cooling water that enters the condenser at 16 °C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 65°C and leaves at 42°C. The inlet state of the compressor is 60 kPa and -34°C and the compressor is estimated to gain a net heat of...
2. Saturated vapor of refrigerant 134a enters a well-insulated compressor at 140 kPa and leaves at 800 kPa and 50°C at a flowrate of 0.04 kg/s. Estimate the work done by the compressor.