A 60-Hx, 2-pole, 208-V wound-rotor induction motor has a threc-phase stator winding of 42 serics turns/phase...
5. A 208-V four-pole 60-Hz Y-connected wound-rotor induction motor is rated at 30 hp. Its equivalent circuit components are R=0.100 Ry=0.070. X - 10.00 R = 250 X; -0.2100 X=0.21002 Praw=500 W P =0.5% of input at full load For a slip of 0.05, find (a) The line current (b) The induced voltage in the rotor (c) The stator power factor (d) The rotor power factor (e) The rotor frequency (f) The stator copper losses (g) The core loss (h)...
5 Marks) A 4-pole, 3 phase, 50 Hz, 230 V induction motor. Each phase of rotor winding b) has one-fourth the number of turns of each stator. The full-load speed is 1,455 rpm. The rotor resistance is 0.3 Ω and rotor standstill reactance is 1.0 Ω per phase. The rotor and stator windings are similar. Stator losses are equal to 50 Watts. Friction and windage losses are equal to 30 W. Calculate ) Blocked rotor voltage per phase. 2 Marks)...
Problem 1: A four pole, 60Hz, 3-d synchronous generator has a rotor radius of 15 cm, a rotor length of 2.7m, and an air gap length of 2 mm. The rotor field winding consists of 1000 turns with a winding factor of 0.962. The Δ connected armature winding has 25 series turns per phase with a winding factor of 0.935. The generator is designed to achieve rated open-circuit voltage at a peak air-gap flux density of 1.25 T (a) At...
Name: 23. A 3-phase, 5000 hp, 6000 v,60 Hz, 12-pole wound-rotor induction motor has the 1, resistance between stator terminals-o12 Ω 2. resistance between rotor slip-rings-0.0073 Ω 3. windage and friction losses-51 kW following characteristics 4. iron losses in the stator-39 kW 5. locked rotor current at 6000 V-1800 A 6. active power to the stator with rotor locked 2207 kw Calculate under full-load voltage locked-rotor conditions a. Reactive power absorbed by the motor b. FR losses in the stator...
Consider a 50 kW, 3-phase, 380 V line-to-line, 50 Hz, 6 pole Y-connected wound-rotor induction motor. The stator winding ac resistance is 0.1 Ω/phase. The effective stator-to-rotor turns ratio is 2. The exciting branch is negligible. It is found that when an external resistor of 0.09 Ω/phase is connected to the rotor terminals maximum starting torque of 1150 Nm is obtained. a. Compute the internal mechanical power and the internal torque developed by this motor when it drives a load...
Consider a three-phase, 2-pole induction machine. Neglect the stator winding resistance and the leakage inductance. The rated voltage is 217V (line-line, rms) at 60 Hz. Lm65mH, and the peak flux density in the air gap is 0.89T. Consider that the phase-a voltage reaches its positive peak at wt-0. Assuming that the rotor circuit is somehow open circuited, calculate the position(angle) of the magnetizing current space vector ims at wt-4g°.
A 3-phase, 208 V, 60 Hz, 30 hp, four-pole induction motor has the following equivalent circuit parameters. R1 = 0.2 Ω, , , Xm = 12Ω.The rotational loss is 500 W. For a slip of 5%, calculate (a) The motor speed in rpm and radians per sec (b) The current drawn by the motor from the power supply (c) The stator cu-loss (d) The air gap power (e) The rotor cu-loss (f) The shaft power (g)The developed torque and the shaft torque (h) The efficiency of the motor Use...
Q3. A single-phase, 120 V, 60 Hz, four-pole, split-phase induction motor has the following equivalent circuit parameters: Stator parameters: The Main winding (R =1.512, X=2.522), and the auxiliary winding (R=2.512, X=2.52), Rotor parameters referred to the stator side: (R=1N, X=1.592). The magnetizing reactance is equal to 4082. (a)Determine the standstill impedances of both windings. (b)Determine the starting torque and the starting current of the motor if it is started from rated voltage mains as a split phase induction motor. (c)Determine...
Stator winding stator axis rotor axis ܕ݁ܐܶ RU in L rotor V.RO 0 0.= initial position of the rotor at standstill (rest position) a) Schematic view of SPPMSM b) Electrical equivalent circuit of SPPMSM Description of the motor: In Fig. a, cross-section of a Single Phase Permanent Magnet Synchronous Motor (SPPMSM) is seen. A U shaped stator is wound with a stator winding consisting of two coils connected in series (you can consider a single coil with N turns). A...
Question 2 [10 marks) A six pole, three phase induction motor, with a star connected stator winding is energised from a 380V, 50Hz supply. The ratio of the stator to rotor turns is assumed 1.8 and a full load slip of 4%. If the respective per phase rotor resistance and standstill reactance are 0.120 and 0.8502, determine: a. Torque developed at full load b. The maximum torque and the speed at maximum torque