Homework Answers
a) What is the resolution (minimum distinguishable input voltage) of a 8-bit ADC with VRH 5V...
a) What is the resolution (minimum distinguishable input voltage) of a 8-bit ADC with VRH 5V and Suppose that there is a 12-bit AD converter with VRL = 1V and VRH-5V. Find the corresponding voltage values for the A/D conversion results of 12, 180, and 1200 b) Assume that we have a 20-bit Successive Approximation ADC, driven by a 2 KHz clock. What is the minimum conversion time of one sample with this ADC? Express your answer in seconds. c)
Problem For an 8 bit-Unipolar D/A converter, what is the output voltage for an input of...
Problem For an 8 bit-Unipolar D/A converter, what is the output voltage for an input of E8h? Assume that the reference voltage is 10V? For a 10 bit-Bipolar D/A converter, what is the input binary code for an output voltage of -3.5V? Assume that the reference voltage is 12V? problem Determine how many bits a D/A converter must have to provide output increments of 0.03V or less? Assume that the reference is 10V. What is the exact percentage of change...
Q2. Answer the following questions a) An ADC converter is required to digitize a -5 to...
Q2. Answer the following questions a) An ADC converter is required to digitize a -5 to +5 volts analog signal to a resolution of b) The analog input is 0-5 volts and VRH 5, VRL 0. The ADC reading is $24. What is the c) How is the HCS12 ADC powered up? How long must the program delay before using the 10 mV. How many bits are required? analog input voltage for a 10-bit conversion? ADC after powering it up?...
A 12 bit A/D converter has an input range of -12 V to 12 V. An...
A 12 bit A/D converter has an input range of -12 V to 12 V. An amplifier is connected to the input and has selectable gains of 10, 25, 50, 100, 250, and 500. The connected transducer has an output that varies between +75 and -75 mV. Design a simple voltage-divider attenuator using standard resistor values to minimize the quantizing error. What will the quantizing error be when the transducer voltage is 5 mV.
2. (a) An 8-bit A/D converter has an input range of 0 to 15 V and...
2. (a) An 8-bit A/D converter has an input range of 0 to 15 V and an output in simple binary. Find the output (in decimal) if the input is (a) 6.42 V (6) -6.42 V (C) 12 V (d) OV (b) Convert Hexa decimal Number B602 to a decimal number and Binary. Convert decimal number 227 to binary number.
2. (a) An 8-bit A/D converter has an input range of 0 to 15 V and...
2. (a) An 8-bit A/D converter has an input range of 0 to 15 V and an output in simple binary. Find the output (in decimal) if the input is (a) 6.42 V (b) -6.42 V (c) 12 V (d) OV (b) Convert Hexa decimal Number B602 to a decimal number and Binary. Convert decimal number 227 to binary number.
An 8-bit D/A converter with a 10-volt reference (and Rf = R) has an input of...
An 8-bit D/A converter with a 10-volt reference (and Rf = R) has an input of 10010001. What is the output voltage? What is the step size of the D/A converter? What is the percent resolution?
1. An A/D converter will convert voltages over a 0 to 10 V range. How many...
1. An A/D converter will convert voltages over a 0 to 10 V range. How many bits must it be to achieve a 1 mV resolution over the entire range? 2. You have an A/D converter that will convert over a range of 0 to 5 V. You input an analog signal to it that has a range of 1 to 3.5 V. What must be the number of bits of the converter to achieve a resolution of 1% of...
A 12-bit A/D converter has an input range of ±8 V. Determine the step size. Do...
A 12-bit A/D converter has an input range of ±8 V. Determine the step size. Do this by hand and show all work.
11. The MC1408 is an 8-bit D/A converter with equal reference and output resistors. If the reference voltage is 5.0 V. 4,4,4,4,41 a. What is the voltage step size? Solution Use the circu...
11. The MC1408 is an 8-bit D/A converter with equal reference and output resistors. If the reference voltage is 5.0 V. 4,4,4,4,41 a. What is the voltage step size? Solution Use the circuit below to answer the three questions·LEDI is Yellow andLED2 is AMBER and typically, Vr 1.85 V 8.5 mA. The NAND gates are 741S00 with 0.35 V as typical VoL. Show complete work in the space provided 14.6, 4 a. If A10 and Ai = 1, which LED...
a) What is the resolution (minimum distinguishable input voltage) of a 8-bit ADC with VRH 5V and Suppose that there is a 12-bit AD converter with VRL = 1V and VRH-5V. Find the corresponding voltage values for the A/D conversion results of 12, 180, and 1200 b) Assume that we have a 20-bit Successive Approximation ADC, driven by a 2 KHz clock. What is the minimum conversion time of one sample with this ADC? Express your answer in seconds. c)
Q2. Answer the following questions a) An ADC converter is required to digitize a -5 to +5 volts analog signal to a resolution of b) The analog input is 0-5 volts and VRH 5, VRL 0. The ADC reading is $24. What is the c) How is the HCS12 ADC powered up? How long must the program delay before using the 10 mV. How many bits are required? analog input voltage for a 10-bit conversion? ADC after powering it up?...
2. (a) An 8-bit A/D converter has an input range of 0 to 15 V and an output in simple binary. Find the output (in decimal) if the input is (a) 6.42 V (6) -6.42 V (C) 12 V (d) OV (b) Convert Hexa decimal Number B602 to a decimal number and Binary. Convert decimal number 227 to binary number.
2. (a) An 8-bit A/D converter has an input range of 0 to 15 V and an output in simple binary. Find the output (in decimal) if the input is (a) 6.42 V (b) -6.42 V (c) 12 V (d) OV (b) Convert Hexa decimal Number B602 to a decimal number and Binary. Convert decimal number 227 to binary number.
1. An A/D converter will convert voltages over a 0 to 10 V range. How many bits must it be to achieve a 1 mV resolution over the entire range? 2. You have an A/D converter that will convert over a range of 0 to 5 V. You input an analog signal to it that has a range of 1 to 3.5 V. What must be the number of bits of the converter to achieve a resolution of 1% of...
11. The MC1408 is an 8-bit D/A converter with equal reference and output resistors. If the reference voltage is 5.0 V. 4,4,4,4,41 a. What is the voltage step size? Solution Use the circuit below to answer the three questions·LEDI is Yellow andLED2 is AMBER and typically, Vr 1.85 V 8.5 mA. The NAND gates are 741S00 with 0.35 V as typical VoL. Show complete work in the space provided 14.6, 4 a. If A10 and Ai = 1, which LED...
Most questions answered within 3 hours.
-
The moment of inertia of a disk rotating about its axis of
symmetry is Icm=1/2MR^2
The...
asked 2 minutes ago -
When using a relational database what makes data
formatting so important and critical to the functions...
asked 13 minutes ago -
The following temperatures show the (fictional) daily low
measured at O'Hare airport every January 1st from...
asked 33 minutes ago -
Your friend is interested in the characteristics of fast tree
planters. He searched through the records...
asked 41 minutes ago -
. 0.67 g of Ag is deposited electrolytically from
AgNO3 after a certain period of time...
asked 42 minutes ago -
assuming that the boric acid, h3po3 present at the end of the
borax tritation has a...
asked 41 minutes ago -
When a carbonate solution is acidified, carbon dioxide is
produced.
2H+(aq) + CO32-(aq) → H2O(l) +...
asked 1 hour ago -
A reaction has the following rate law: Rate =
kr[A][B]2. In experiment 1, the
concentrations of...
asked 1 hour ago -
king owns a large number of public pay phones. as rhe use of
payphones decline deamatically,...
asked 1 hour ago -
3.7 - A book is sitting on a table. The mass of the book
is 1...
asked 1 hour ago -
Which term describes the process by which a single strand of DNA
serves as a template...
asked 1 hour ago -
LAB FOOD DRING
ANSWER THE QUESTIONS:
Q1. What value is the moisture content versus time and...
asked 1 hour ago