Q10. A three phase, 100-hp, 2400V, 6-pole, 50 Hz induction motor is tested, with the following...

Question

Question

Answer 1

Answer #1

p phoe Re sistance R Wb 3333. Iba (35) 3-129П e phase Xactance . anCC a 137 dancC 2 2

Answer 2

Similar Homework Help Questions

The input power to a 480V, 3 phase, 6 pole, 50 Hz induction motor is 75kW...

The input power to a 480V, 3 phase, 6 pole, 50 Hz induction motor is 75kW with a line current of 75A and runs at a slip of 2.5%. If the stator core loss is 2 kW, windage and friction loss is 1.2 kW, and the stator resistance per phase is 0.16 ohm. Calculate: a. Power supplied to the rotor (Air gap power) b. Rotor copper loss c. Shaft power d. Efficiency of the motor e. Shaft torque f What...
A 3-phase, 208 V, 60 Hz, 30 hp, four-pole induction motor

A 3-phase, 208 V, 60 Hz, 30 hp, four-pole induction motor has the following equivalent circuit parameters. R1 = 0.2 Ω, , , Xm = 12Ω.The rotational loss is 500 W. For a slip of 5%, calculate (a) The motor speed in rpm and radians per sec (b) The current drawn by the motor from the power supply (c) The stator cu-loss (d) The air gap power (e) The rotor cu-loss (f) The shaft power (g)The developed torque and the shaft torque (h) The efficiency of the motor Use...
A 230 V, 50 Hz, three-phase, Y-connected, 6-pole induction motor has the following per-phase parameters R-0.07...

A 230 V, 50 Hz, three-phase, Y-connected, 6-pole induction motor has the following per-phase parameters R-0.07 Ro 00 0.08 Ω x, x, 0.3 xm 6.33 At a slip of 2%, determine the followings using approximate equivalent circuit of the motor i) The motor speed in rev/min and rad/s. ii) The rotor current. ii) The stator current. iv) The induced torque. v) The efficiency of the motor.

[1. The shaft output of a three-phase, 60 Hz induction motor is 100 HP. The friction...

[1. The shaft output of a three-phase, 60 Hz induction motor is 100 HP. The friction and windage losses are 900 W, the stator core loss is 4200 W, and the stator copper loss is 2700 W. If the slip is 3.75%, what is the efficiency of the motor.
3) A four pole 75 HP 50 Hz induction motor with an efficiency of 93.4% has...

3) A four pole 75 HP 50 Hz induction motor with an efficiency of 93.4% has equivalent resistance and equivalent reactance per phase of 0.3000and 0.78 000OTHE blocked rotor voltage per phase is 175V. If the rotor is turning at 1425 rpm, determine synchronous speed, slip, rotor impedance, rotor current, total three phase apparent power crossing the air gap, its active and reactive components, rotor power factor, shaft speed, mechanical power developed and developed torque. (30 Points)
1. A six pole, 240V, 50 Hz three phase squirrel-cage induction motor has a no-load speed...

1. A six pole, 240V, 50 Hz three phase squirrel-cage induction motor has a no-load speed of 103 rad/s and a speed regulation of 5% at rated load. Find the amount of slip (in rpm) at full load for this motor. 2.. A 2 HP, 240 VAC, 60 Hz, capacitor-start motor is 75% efficient and draws 10 A at full load. What is this motor's power factor at rated load? 3. A wound rotor, 3 phase induction motor in Mr....

. A 460-V 460-V, 25-hp, 60-Hz, six-pole, Y-connected induction motor has the following impedanc ohms per...

. A 460-V 460-V, 25-hp, 60-Hz, six-pole, Y-connected induction motor has the following impedanc ohms per phase referred to the stator circuit. Ri= 0.212 R2 = 0.282 X1 = 1.055 12 X2 = 1.055 22 XM = 33.9 W The total rotational losses are 1100 W and are assumed to be constant. The core loss is lumped with the rotational losses. For a rotor slip of 4% at the rated voltage and rated frequency, a) The input power b) Peony...
A 5 hp, 4-pole, 50 Hz, three phase induction motor. If the full-load speed is 1300...

A 5 hp, 4-pole, 50 Hz, three phase induction motor. If the full-load speed is 1300 rpm, calculate the slip rpm 250 200 300 2 1 1 HTML
A 480 V, 60 Hz, 4-pole-pair, three-phase, delta-connected induction motor has the following parameters: R1=0.42 Ω,...

A 480 V, 60 Hz, 4-pole-pair, three-phase, delta-connected induction motor has the following parameters: R1=0.42 Ω, R2=0.23 Ω, X1=0.48 Ω, X2=0.29 Ω, Xm=29.71 Ω where: R1 is the stator resistance R2 is the rotor resistance reflected in the stator; X1 is the stator leakage inductance; X2 is the rotor leakage inductance reflected in the stator; Xm is the magnetising inductance; The rotational losses are 2450 W. The motor drives a mechanical load at a speed of...

A two-pole, 75kW, 440 V, 50 Hz, Y-connected, three-phase squirrel cage induction motor has the fo...

Please solve this question. Thank you. A two-pole, 75kW, 440 V, 50 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters, in Ω/phase referred to the stator: R1-0.075, XI 0.17, xm-72, R2-0.065 and X-0.17. Its rated slip is 4%. Assume that the mechanical losses are 1 kW and the core losses are 1.1 kW. Compute: a. The rated input current b. The rated power factor. c. The pullout torque d. The induced and load torques at rated conditions....