what is the angle of wrap for pitch diameters are 300 mm and 85 mm and...
what is the angle of wrap for pitch diameters are 300 mm and 85 mm and center distance is 500 mm for a belt drive
Homework Answers
Add Answer to:
what is the
angle of wrap for pitch diameters are 300 mm and 85 mm and...
A V- belt drive is to transmit 24 kW of power from a 200 mm pitch...
A V- belt drive is to transmit 24 kW of power from a 200 mm pitch sheave operating at 1500 rpm to a 600 mm diameter sheave. The distance between the input and the output shafts is 800 mm. The grove angle f = 40o and the coefficient of friction between the belt and the sheave is 0.25. The belt to be used weighs 0.9 kg/m and the allowable tension in the belt is 900 N. How many belts are...
Consider the following drive train. Gears are shown by their pitch diameters. Gear 2 is the...
Consider the following drive train. Gears are shown by their pitch diameters. Gear 2 is the pinion Gear diameter not drawn to scale. N4 Ng No 12 + 3 4 6 N2 5 ng N: Question 1 100 pts All gears have a 5 mm module and 25 degree pressure angle The pinion rotates at 100 RPM and has 10 teeth Each simple gear set has a 10:1 gear ratio. Determine: Pinion pitch diameter (mm) overall train ratio [Choose ]...
A-V belt is to transmit 20 kW from a 250 mm pitch diameter sheave to a...
A-V belt is to transmit 20 kW from a 250 mm pitch diameter sheave to a 900 mm diameter pulley. The center distance between the two shafts is 1000 mm. The groove angle is 40' and the coefficient of friction for the belt and sheave is 0.2 and the coefficient of friction between the belt and flat pulley is 0.2. The cross-section of the belt is 40 mm wide at the top, 20 mm wide at the bottom and 25...
- 300 min = 800 kgm = 2.0 m/s = 0.0725 = 2.0 = 80 =...
- 300 min = 800 kgm = 2.0 m/s = 0.0725 = 2.0 = 80 = 260 m = 260 m = 255 m = 1.0 The following data refers to a horizontal belt conveyor used for conveying a coal in a therm Standard electric motor ratings: 5, 5.5, 7.5, 10, 11, 12.5, 15, 20, 22, 25 kW power station : Capacity of conveyor Density of coal Belt speed Surcharge factor for polyamide belt, Ċ Number of plies for polyamide...
A 16-tooth right-handed helical pinion turns at 2000 rpm and transfers 5kw to a 38-tooth gear with 30 helix-angle 25 pressure angle. Normal module is 2 mm. Determine pitch diameters; tangential module...
A 16-tooth right-handed helical pinion turns at 2000 rpm and transfers 5kw to a 38-tooth gear with 30 helix-angle 25 pressure angle. Normal module is 2 mm. Determine pitch diameters; tangential module; axial and tangential pitch; normal pressure angle; transmitted load.
2/1 A spur gearset has a module of 4 mm and a pressure angle of 25°,...
2/1 A spur gearset has a module of 4 mm and a pressure angle of 25°, and a velocity ratio of 2.80. The pinion has 20 teeth. 1) Checok for interference; show your work. 2) Find: a) The number of teeth on the driven gear b)The circular pitch c) The pitch and base diameters d) The theoretical center distance e) The contact ratio
2. Given a belt drive system with the following parmeters: 25 HP electrice motor, motor speed of 870 rpm, service factor of 1.3, driving sheave diameter of 13.1 inches, driven sheave diametet of...
2. Given a belt drive system with the following parmeters: 25 HP electrice motor, motor speed of 870 rpm, service factor of 1.3, driving sheave diameter of 13.1 inches, driven sheave diametet of 27.7 inches, and a belt length of 180 inches, find the design power, the center-to-center distance for the sheaves, and the output speed. Show all work Driving Driven e2 n1 Slack side 01 D, Vb Bet speed n2 D2 Tight side Note: D1 and 02 are pitch...
A gear-set consists of a 16-tooth pinion driving a 40-tooth gear. The diametral pitch (P) is...
A gear-set consists of a 16-tooth pinion driving a 40-tooth gear. The diametral pitch (P) is 2, and the addendum and dedendum are 1/P and 1.25/P respectively. The gears are cut using a pressure angle of 20°. Compute the circular pitch, the center distance and the radii of the base circles. In mounting the gears, the center distance was incorrectly made ¼ in longer. Compute the new values of pressure angle and the pitch circle diameters. (Ans. 1.57 in, 14...
Q – 2. A V-belt drive is to transmit 24 kW of power from a 200...
Q – 2. A V-belt drive is to transmit 24 kW of power from a 200 mm pitch sheave operating at 1500 rpm to a 600 mm diameter sheave. The distance between the input and the output shafts is 800 mm. The grove angle f = 40° and the coefficient of friction between the belt and the sheave is 0.25. The belt to be used weighs 0.9 kg/m and the allowable tension in the belt is 900 N. How many...
Mechanical Engineering
A gearset consists of a 16-tooth pinion driving a 40-tooth gear. The module m= 12. The gears are cutusing a pressure angle of 20◦.(a) Compute the circular pitch, the center distance, and the radii of the base circles.(b) In mounting these gears, the center distance was incorrectly made 6 mm larger.Compute the new values of the pressure angle and the pitch-circle diameters.
Consider the following drive train. Gears are shown by their pitch diameters. Gear 2 is the pinion Gear diameter not drawn to scale. N4 Ng No 12 + 3 4 6 N2 5 ng N: Question 1 100 pts All gears have a 5 mm module and 25 degree pressure angle The pinion rotates at 100 RPM and has 10 teeth Each simple gear set has a 10:1 gear ratio. Determine: Pinion pitch diameter (mm) overall train ratio [Choose ]...
A-V belt is to transmit 20 kW from a 250 mm pitch diameter sheave to a 900 mm diameter pulley. The center distance between the two shafts is 1000 mm. The groove angle is 40' and the coefficient of friction for the belt and sheave is 0.2 and the coefficient of friction between the belt and flat pulley is 0.2. The cross-section of the belt is 40 mm wide at the top, 20 mm wide at the bottom and 25...
- 300 min = 800 kgm = 2.0 m/s = 0.0725 = 2.0 = 80 = 260 m = 260 m = 255 m = 1.0 The following data refers to a horizontal belt conveyor used for conveying a coal in a therm Standard electric motor ratings: 5, 5.5, 7.5, 10, 11, 12.5, 15, 20, 22, 25 kW power station : Capacity of conveyor Density of coal Belt speed Surcharge factor for polyamide belt, Ċ Number of plies for polyamide...
2/1 A spur gearset has a module of 4 mm and a pressure angle of 25°, and a velocity ratio of 2.80. The pinion has 20 teeth. 1) Checok for interference; show your work. 2) Find: a) The number of teeth on the driven gear b)The circular pitch c) The pitch and base diameters d) The theoretical center distance e) The contact ratio
2. Given a belt drive system with the following parmeters: 25 HP electrice motor, motor speed of 870 rpm, service factor of 1.3, driving sheave diameter of 13.1 inches, driven sheave diametet of 27.7 inches, and a belt length of 180 inches, find the design power, the center-to-center distance for the sheaves, and the output speed. Show all work Driving Driven e2 n1 Slack side 01 D, Vb Bet speed n2 D2 Tight side Note: D1 and 02 are pitch...
Q – 2. A V-belt drive is to transmit 24 kW of power from a 200 mm pitch sheave operating at 1500 rpm to a 600 mm diameter sheave. The distance between the input and the output shafts is 800 mm. The grove angle f = 40° and the coefficient of friction between the belt and the sheave is 0.25. The belt to be used weighs 0.9 kg/m and the allowable tension in the belt is 900 N. How many...
Most questions answered within 3 hours.
-
Write a program to solve the Josephus problem, with the following
modification:
Sample Input:
./a.out n...
asked 2 hours ago -
At the start of a CD it is spinning at a rate of 525 rpm
(revolutions...
asked 3 hours ago -
4. Without doing any calculations, predict whether the observed
∆T would increase, decrease or remain the...
asked 4 hours ago -
Based on the range, which of the following sets of scores has
the greatest variability? 3,...
asked 5 hours ago -
Ripples in a pond travel at a velocity of 3 m/s with one peak
passing a...
asked 5 hours ago -
A man stands on the roof of a building of height 13.0 mm and
throws a...
asked 5 hours ago -
The extent to which assets are financed by borrowed funds and
other liabilities is indicated by:...
asked 6 hours ago -
Explain in detail
Germany is the fifth largest economy
explain what goods and services Germany specializes...
asked 6 hours ago -
The density of platinum is 21.45 g/mL. If a cube of platinum
with a mass of...
asked 6 hours ago -
Accounts Receivable
Sales
A/R Posting
Extended Sales Invoice
Packing Slip
Compare invoice to packing slip 2...
asked 6 hours ago -
Michaella, age 23, is a full-time law student and is claimed by
her parents as a...
asked 6 hours ago -
Why are polymers not typically casted into products?
asked 7 hours ago