An electrical system connected to a 98 V voltage source (without internal resistance), works with a compound RC circuit with a resistance of R = 9 Ω and two capacitors (initially discharged) with equal capacitances of C1 = C2 = 5 μF, thus as a switch that is connected to terminal a to carry out the charging process on the capacitors, until a very long time passes, in such a way that in the end the capacitors are fully charged.
ε=98, R=9 Ω, C1=5 μF, C2=5 μF
Based on the fact that the capacitors are fully charged and at t = 0, the switch is connected to terminal b. What is the voltage at resistance R at t = 0?
We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
An electrical system connected to a 98 V voltage source (without internal resistance), works with a...
Two capacitors are connected to a battery. The battery voltage is V = 90 V, and the capacitances are C1 = 2.00 μF and C2 = 4.00 μF. Determine the total energy stored by the two capacitors when they are wired (a) in parallel and (b) in series.
The circuit in the figure below contains two resistors, R1-1.8 kΩ and R2 2.8 k. and two capacitors, C1-1.7 μF and C3 = 2.5 μF, connected to a battery with emf ε-105 v. If there are no charges on the capacitors before switch s is closed, determine the charges q1 and q2 on capacitors C1 and C2, respectively, as functions of time, after the switch is closed. Hint: First reconstruct the circuit so that it becomes a simple RC circuit...
Consider a series circuit containing a resistor of resistance R and a capacitor of capacitance C connected to a source of EMF ε with negligible internal resistance. The wires are also assumed to have zero resistance. Initially, the switch is open and the capacitor discharged. (Figure 1)Immediately after the switch is closed, what is the voltage across the resistor?Immediately after the switch is closed, what is the direction of the current in the circuit?
uncharged capacitor C1 is charging. At the time inst . capacitor CI - 80 F, and ressitor R-10 kOhm are connected as magnitude, find (a) voltage on resistor R1 and Next, when C1 is fully charged, the switch charges capacitor C2 = 30 F. (d) Find the voltage on the magnitude of electric charge of C1 then? s charging. At the time instant b or R=10 kOhm are connected as shown and the initially u t in the circuit is...
The capacity of a storage battery, such as those used in automobile electrical systems, is rated in ampere-hours (A · h). A 50-A · h battery can supply a current of 50 A for 1.0 h, or 25 A for 2.0 h, and so on. Consider a 12.0-V battery that has an internal resistance of 0.26 Ω and a capacity of 55.8 A · h. The battery is charged by passing a 9-A current through it for 6.2 h. (a)...
In the circuit shown in Figure 6(b), an emf source E = 12 V and resistance r = 0.3.2 is connected to two resistors R1 = 1.52 and R2 = 1.212. Two capacitors C1 = 0.05 uF and C2 = 0.02 uF are connected in parallel to the resistors, and switch S is open. ię RB + + RB Figure 6(b) Calculate the current in the circuit and the charges Q1, Q2 on the capacitors after a long time. ANS:...
An RC circuit is connected across a DC voltage source through an open switch. The switch is closed at t = 0 s. Which of the following is a correct statement regarding the circuit? The capacitor charges to its maximum value in one time constant. The resistor and the capacitor share the applied voltage equally as a function of time. The current flows through the circuit even after the capacitor is fully charged. Once the capacitor is fully charged, there...
(a) A capacitor of capacitance 220 μF is connected in series with a 150 kΩ resistor, a switch and an ammeter. A d.c. power supply of negligible internal resistance is connected to the circuit as shown below 1 50 kΩ 220HF A stopclock is started and after 10 seconds the switch S is closed Ammeter readings are noted at regular intervals until a time of 80s is shown on the stopclock. The graph below shows how the current in the...
If a l V rms signal source with an internal resistance of 50 Ω is connected to the amplifier in Figure what is the actual rms signal applied to the amplifier input? Assume Bac 200 +15 V RI 1.0 kΩ 01 Di C3 02 75 Ω 1.0 kΩ Class C Power Amplifiers A certain class C amplifier transistor is on for 10 percent of the input cycle. If Veetsa) 0.18 V and Ie(sa)25 mA, what is the average power dissipation...
Consider a series circuit containing a resistor of resistance R and a capacitor of capacitance C connected to a source of EMF E with negligible internal resistance. The wires are also assumed to have zero resistance. Initially, the switch is open and the capacitor discharged. (Figure 1)A Immediately after the switch is closed, what is the voltage across the capacitor?B Complete previous part(s) C Immediately after the switch is closed, what is the direction of the current in the circuit? E Eventually,...