Asphalt pavement may achieve temperatures as high as 50oC on a hot summer day. Assume that such a temperature exists throughout the pavement, when suddenly a rainstorm reduces the surface temperature to 20oC. Calculate the magnitude of total amount of energy (kJ/m2) that will be transferred from the asphalt over a 30-min period in which the surface is maintained at 20oC. Consider density of asphalt as 2135 kg/m3 and thermal conductivity as 0.054000000000000006 W/mK. The specific heat capacity of asphalt is 920 J/kgK.
Energy = 467 kJ/m2
is wrong
Asphalt pavement may achieve temperatures as high as 50oC on a hot summer day. Assume that...
Asphalt pavement may achieve temperatures as high as 50°C on a hot summer day. Assume that such a temperature exists throughout the pavement, when suddenly a rainstorm reduces the surface temperature to 30°C. Calculate the total amount of energy (kJ/m2) that will be transferred from the asphalt over a 30-min period in which the surface is maintained at 30°C. kJ/m2 The total amount of energy is Physical Properties Mathematical Functions
On a summer day, the air temperature is 36°C and the relative humidity is 20%. Water evaporates from the surface of a lake at a rate of 0.20 kg/h per square metre of water surface area. The temperature of water is 25°C. (a) Determine the mass transfer coefficient. (10 marks) (b) Determine the convective heat transfer coefficient. (10 marks) (c) Determine the net heat loss (in W/m2) from the lake. (5 marks) The specific volume of water vapour at 25°C...
summatize the following info and break them into differeng key points. write them in yojr own words apartus 6.1 Introduction—The design of a successful hot box appa- ratus is influenced by many factors. Before beginning the design of an apparatus meeting this standard, the designer shall review the discussion on the limitations and accuracy, Section 13, discussions of the energy flows in a hot box, Annex A2, the metering box wall loss flow, Annex A3, and flanking loss, Annex...
summarizr the followung info and write them in your own words and break them into different key points. 6.5 Metering Chamber: 6.5.1 The minimum size of the metering box is governed by the metering area required to obtain a representative test area for the specimen (see 7.2) and for maintenance of reasonable test accuracy. For example, for specimens incorporating air spaces or stud spaces, the metering area shall span an integral number of spaces (see 5.5). The depth of...