Homework Answers
Add Answer to:
During a cooling process of a stainless steel plate, water at 30°C flows over this plate...
During its manufacture, plate glass at 600°C is cooled by passing air over its surface such...
During its manufacture, plate glass at 600°C is cooled by passing air over its surface such that the convection heat transfer coefficient is h. To prevent cracking, it is known that the temperature gradient must not exceed 15 °C/mm at any point in the glass during the cooling process. The thermal conductivity of the glass is 1.4 W/mK and its surface emissivity is 0.75. The temperature of the air that is used for the cooling is 315 °C. Assume that...
Steam at 150 °C flows in a stainless steel pipe which has a thermal conductivity of...
Steam at 150 °C flows in a stainless steel pipe which has a thermal conductivity of 16 W m-1 K -1 whose inner and outer diameters are 5 and 6 cm respectively. The pipe is covered with 3 cm think insulation having a thermal conductivity of 0.035 W m-1 K -1 . The combined convection and radiation heat transfer coefficient at the outside surface of the insulation is 20 W m-2 K -1 and the surroundings are at 10 °C....
art II- Show your work 17 Marks team at 320°C flows in a stainless steel pipe...
art II- Show your work 17 Marks team at 320°C flows in a stainless steel pipe (kr 15 W/m "C) whose inner and outer diameters are 5 em and 5.5 cm, respectively. The pipe is covered with 3-cm-thick glass wool insulation (k 0.038 W m·°C). Heat is lost to the surroundings at 5°C by natural convection and radiation, with a combined natural convection and radiation heat transfer coefficient of hi-15 w/m.。C. The convective heat transfer coefficient inside the pipe to...
Exercise 2 Air at 20 °C and 1 atm flows over a flat plate at 50...
Exercise 2 Air at 20 °C and 1 atm flows over a flat plate at 50 m/s. The plate is 300 cm long and is maintained at 60C. The width of the plate is 2 m. The critical Rec = 5 x 105 The properties are Conductivity k = 0.0263 W/mK, kinematic viscosity nu = v = 15.89 x 10-6 m²/s, Prandtl number is Pr=0.707 Density rho = p = 1.128 kg/m3 1. Determine the critical length Xc 2. Determine...
3. The annular pipe arrangement shown in the figure below is made of stainless steel and the oute...
3. The annular pipe arrangement shown in the figure below is made of stainless steel and the outer surface is insulated. Air flows through the central pipe with a mass flow rate, ma0.026 kg/s. Water flows through the annular region with a mass flow rate, mw-0.58 kg/s. At the given position along the pipe the bulk temperature of the air, Ta-100°C, and the bulk temperature of the water, Tw- s 10°C. The thermal conductivity of stainless steel, kss 15 W/mK....
A large stainless steel (AISI 316) plate having a thickness of 5 mm is initially at...
A large stainless steel (AISI 316) plate having a thickness of 5 mm is initially at a temperature of 70°C, and both sides of the plate are suddenly exposed to a convection environment at 20°C with the heat transfer coefficient of h= 800 W/m 2 oC. What will be the center and surface temperatures of the plate after 10 s? For stainless steel (AISI 316), α = 348x10-6 m2/s and k = 13.4 W/m K.
4. Hardening of ball bearings made from Type 440C stainless steel, one of the hardest stainless...
4. Hardening of ball bearings made from Type 440C stainless steel, one of the hardest stainless steels, is accomplished by heating the bearings to 1010 to 1065 °C then quenching (rapidly cooling) them in oil Consider bearings 24 mm in diameter at an initial uniform temperature of 1050 °C, cooled in an oil bath at 50 °C in which the convective heat transfer coefficient is 600 W/(m2 K). Properties of Type 440C Stainless Steel:t Density, 7800 kg/m3 Thermal conductivity, 24...
2. (25 pts) Engine oil flows with a velocity of 6 m/s over a flat plate...
2. (25 pts) Engine oil flows with a velocity of 6 m/s over a flat plate having 1m length and 1 m width. The oil has a free stream temperature To= 80 °C and the plate surface temperature is maintained at Ts = 0 °C. a. Determine whether the flow over the plate transitions to turbulent regime. b. Calculate the average friction factor and the average heat transfer coefficient for the plate by using the appropriate correlations. c. Calculate the...
Help mee!! Q1. Heat conduction & convection (38 pt). Hot water flows in a steel pipe...
Help mee!!
Q1. Heat conduction & convection (38 pt). Hot water flows in a steel pipe of 0.1 m inside diameter at a flow rate of 0.2 m/h and at an average temperature of 70 °C. The pipe length is 2.5 m and the inside pipe wall temperature is 60 °C Assume that the pipe thickness is small and the steel heat conductivity is high enough so that the thermal resistance of the pipe wall is negligible. Calculate: (a) The...
Dr. Clark designed a system capable of cooling the air of a house using water in...
Dr. Clark designed a system capable of cooling the air of a house using water in river. The main component is stainless steel pipe (k=15.1 W/mK, Di=0.15m Do=0.152m) submerged in a river with a water temperature T_fluid=17 C. The warm air from the house enters this cooling pipe at a volume flow rate 0.025 m3/s, and T_m,i=27 C. The exit temperature is expected to be T_m,o=20 C. The convection heat transfer coefficient between the pipe external surface and water is...
During its manufacture, plate glass at 600°C is cooled by passing air over its surface such that the convection heat transfer coefficient is h. To prevent cracking, it is known that the temperature gradient must not exceed 15 °C/mm at any point in the glass during the cooling process. The thermal conductivity of the glass is 1.4 W/mK and its surface emissivity is 0.75. The temperature of the air that is used for the cooling is 315 °C. Assume that...
art II- Show your work 17 Marks team at 320°C flows in a stainless steel pipe (kr 15 W/m "C) whose inner and outer diameters are 5 em and 5.5 cm, respectively. The pipe is covered with 3-cm-thick glass wool insulation (k 0.038 W m·°C). Heat is lost to the surroundings at 5°C by natural convection and radiation, with a combined natural convection and radiation heat transfer coefficient of hi-15 w/m.。C. The convective heat transfer coefficient inside the pipe to...
Exercise 2 Air at 20 °C and 1 atm flows over a flat plate at 50 m/s. The plate is 300 cm long and is maintained at 60C. The width of the plate is 2 m. The critical Rec = 5 x 105 The properties are Conductivity k = 0.0263 W/mK, kinematic viscosity nu = v = 15.89 x 10-6 m²/s, Prandtl number is Pr=0.707 Density rho = p = 1.128 kg/m3 1. Determine the critical length Xc 2. Determine...
3. The annular pipe arrangement shown in the figure below is made of stainless steel and the outer surface is insulated. Air flows through the central pipe with a mass flow rate, ma0.026 kg/s. Water flows through the annular region with a mass flow rate, mw-0.58 kg/s. At the given position along the pipe the bulk temperature of the air, Ta-100°C, and the bulk temperature of the water, Tw- s 10°C. The thermal conductivity of stainless steel, kss 15 W/mK....
A large stainless steel (AISI 316) plate having a thickness of 5 mm is initially at a temperature of 70°C, and both sides of the plate are suddenly exposed to a convection environment at 20°C with the heat transfer coefficient of h= 800 W/m 2 oC. What will be the center and surface temperatures of the plate after 10 s? For stainless steel (AISI 316), α = 348x10-6 m2/s and k = 13.4 W/m K.
4. Hardening of ball bearings made from Type 440C stainless steel, one of the hardest stainless steels, is accomplished by heating the bearings to 1010 to 1065 °C then quenching (rapidly cooling) them in oil Consider bearings 24 mm in diameter at an initial uniform temperature of 1050 °C, cooled in an oil bath at 50 °C in which the convective heat transfer coefficient is 600 W/(m2 K). Properties of Type 440C Stainless Steel:t Density, 7800 kg/m3 Thermal conductivity, 24...
2. (25 pts) Engine oil flows with a velocity of 6 m/s over a flat plate having 1m length and 1 m width. The oil has a free stream temperature To= 80 °C and the plate surface temperature is maintained at Ts = 0 °C. a. Determine whether the flow over the plate transitions to turbulent regime. b. Calculate the average friction factor and the average heat transfer coefficient for the plate by using the appropriate correlations. c. Calculate the...
Help mee!!
Q1. Heat conduction & convection (38 pt). Hot water flows in a steel pipe of 0.1 m inside diameter at a flow rate of 0.2 m/h and at an average temperature of 70 °C. The pipe length is 2.5 m and the inside pipe wall temperature is 60 °C Assume that the pipe thickness is small and the steel heat conductivity is high enough so that the thermal resistance of the pipe wall is negligible. Calculate: (a) The...
Most questions answered within 3 hours.
-
A hedge fund is holding a three-year,
$10 million face value 6 percent annual coupon bond...
asked 41 seconds from now -
The focal length of a makeup (concave) mirror is 0.48 m. What
magnification does this mirror...
asked 3 minutes ago -
TRUE/FALSE
Long-lived assets that are tangible in nature, used in the
operations of the business, and...
asked 3 minutes ago -
A dragon biologist is setting up an experimental population of
1000 individuals. In dragons, pointy crests...
asked 14 minutes ago -
A uniform thin rod of length 0.851 m is hung from a horizontal
nail passing through...
asked 24 minutes ago -
A 747 has a cruising speed of 235 m/s at a height of 10,700
meters. The...
asked 33 minutes ago -
Part 3: Arrows
Write a python program that prompts the user for a number of
columns,...
asked 40 minutes ago -
Need help answering these questions!!
1. What economic concept do you find most interesting in
Macroeconomics?...
asked 44 minutes ago -
1. Nimbus, Inc. produces and sells brooms. This table shows the
relationship between the number of...
asked 48 minutes ago -
A gas occupies 200. mL in a piston. If the pressure of the
piston were decreased...
asked 1 hour ago -
A fossil is found to have a 14C level of 71.0% compared to
living organisms. How...
asked 1 hour ago -
Many communist or socialist countries have a department that
addresses public health as well as the...
asked 1 hour ago