Homework Answers
Add Answer to:
3. The annular pipe arrangement shown in the figure below is made of stainless steel and the oute...
Please provide a step-by-step solution to this problem. Heat Transfer 1. The material should be f...
Please provide a step-by-step solution to this problem. Heat
Transfer 1. The material should be from the textbook (Fundamentals
of Heat and Mass Transfer) or similar
3. The annular pipe arrangement shown in the figure below is made of stainless steel and the outer surface is insulated. Air flows through the central pipe with a mass flow rate, ma0.026 kg/s. Water flows through the annular region with a mass flow rate, mw 0.58 kg/s. At the given position along the...
Help mee!! Q1. Heat conduction & convection (38 pt). Hot water flows in a steel pipe...
Help mee!!
Q1. Heat conduction & convection (38 pt). Hot water flows in a steel pipe of 0.1 m inside diameter at a flow rate of 0.2 m/h and at an average temperature of 70 °C. The pipe length is 2.5 m and the inside pipe wall temperature is 60 °C Assume that the pipe thickness is small and the steel heat conductivity is high enough so that the thermal resistance of the pipe wall is negligible. Calculate: (a) The...
During a cooling process of a stainless steel plate, water at 30°C flows over this plate...
During a cooling process of a stainless steel plate, water at 30°C flows over this plate at a velocity of 0.02 m/s. The stainless steel plate (k=19 W/mK) has 1.15 meter long in the flow direction) and the plate width is 0.7 meter. The plate has a uniform surface temperature of 70°C. Determine, 1. The average friction coefficient 2. The total drag force due to friction (N) 3. The average convection heat transfer 2. coefficient (W/m K) 4. The steady...
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water i...
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water in the pipe is um-0.31 m/s and the bulk temperature is 323 K (density 988 kg m-3; viscosity 0.00055 kg m' sı. Pr 3.56, thermal conductivity k 0.64 W m1 Kt). The material of the pipe has thermal conductivity k 0.61 W...
art II- Show your work 17 Marks team at 320°C flows in a stainless steel pipe...
art II- Show your work 17 Marks team at 320°C flows in a stainless steel pipe (kr 15 W/m "C) whose inner and outer diameters are 5 em and 5.5 cm, respectively. The pipe is covered with 3-cm-thick glass wool insulation (k 0.038 W m·°C). Heat is lost to the surroundings at 5°C by natural convection and radiation, with a combined natural convection and radiation heat transfer coefficient of hi-15 w/m.。C. The convective heat transfer coefficient inside the pipe to...
Steam at 150 °C flows in a stainless steel pipe which has a thermal conductivity of...
Steam at 150 °C flows in a stainless steel pipe which has a thermal conductivity of 16 W m-1 K -1 whose inner and outer diameters are 5 and 6 cm respectively. The pipe is covered with 3 cm think insulation having a thermal conductivity of 0.035 W m-1 K -1 . The combined convection and radiation heat transfer coefficient at the outside surface of the insulation is 20 W m-2 K -1 and the surroundings are at 10 °C....
A 10 m long stainless steel (AISI 347) pipe is delivering saturated liquid water at 140...
A 10 m long stainless steel (AISI 347) pipe is delivering saturated liquid water at 140 °C. The inner and out diameter is 20cm and 22cm, respectively. Ambient air at 27 °C flows over this pipe as cross flow at 5 m/s. The convection heat transfer between internal surface and water is 200W/m^2*K. If you need the external surface temperature in finding property of air, you can assume the pipe external surface temperature is 127 °C. (1) Find the heat...
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe...
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe having a diameter of 187 mm and a length of 1 m and maintaining the pipe surface temperature of 96.C. The fluid is entering the pipe at a temperature of 25 C and leaving with a temperature of 76C, take Prandtl number as 12. The density and viscosity of the fluid are 1210 kg/m?, 1 x10Ns/m respectively and its thermal conductivity is 5x102 w/mk....
Dr. Clark designed a system capable of cooling the air of a house using water in...
Dr. Clark designed a system capable of cooling the air of a house using water in river. The main component is stainless steel pipe (k=15.1 W/mK, Di=0.15m Do=0.152m) submerged in a river with a water temperature T_fluid=17 C. The warm air from the house enters this cooling pipe at a volume flow rate 0.025 m3/s, and T_m,i=27 C. The exit temperature is expected to be T_m,o=20 C. The convection heat transfer coefficient between the pipe external surface and water is...
(13) A brewery fermentation tank 12 m in diameter is situated in a room, which has...
(13) A brewery fermentation tank 12 m in diameter is situated in a room, which has a temperature of 15°C. The tank is constructed of 10-mm welded steel plate with 12-mm glass lining. The temperature at the inner surface of the glass lining is 50°C. Assume that the convective resistance offered by the air film on the outside of the tank equals the combined resistance of the glass and steel. The thermal conductivity of glass is 0.80 W/mK and that...
Please provide a step-by-step solution to this problem. Heat
Transfer 1. The material should be from the textbook (Fundamentals
of Heat and Mass Transfer) or similar
3. The annular pipe arrangement shown in the figure below is made of stainless steel and the outer surface is insulated. Air flows through the central pipe with a mass flow rate, ma0.026 kg/s. Water flows through the annular region with a mass flow rate, mw 0.58 kg/s. At the given position along the...
Help mee!!
Q1. Heat conduction & convection (38 pt). Hot water flows in a steel pipe of 0.1 m inside diameter at a flow rate of 0.2 m/h and at an average temperature of 70 °C. The pipe length is 2.5 m and the inside pipe wall temperature is 60 °C Assume that the pipe thickness is small and the steel heat conductivity is high enough so that the thermal resistance of the pipe wall is negligible. Calculate: (a) The...
During a cooling process of a stainless steel plate, water at 30°C flows over this plate at a velocity of 0.02 m/s. The stainless steel plate (k=19 W/mK) has 1.15 meter long in the flow direction) and the plate width is 0.7 meter. The plate has a uniform surface temperature of 70°C. Determine, 1. The average friction coefficient 2. The total drag force due to friction (N) 3. The average convection heat transfer 2. coefficient (W/m K) 4. The steady...
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water in the pipe is um-0.31 m/s and the bulk temperature is 323 K (density 988 kg m-3; viscosity 0.00055 kg m' sı. Pr 3.56, thermal conductivity k 0.64 W m1 Kt). The material of the pipe has thermal conductivity k 0.61 W...
art II- Show your work 17 Marks team at 320°C flows in a stainless steel pipe (kr 15 W/m "C) whose inner and outer diameters are 5 em and 5.5 cm, respectively. The pipe is covered with 3-cm-thick glass wool insulation (k 0.038 W m·°C). Heat is lost to the surroundings at 5°C by natural convection and radiation, with a combined natural convection and radiation heat transfer coefficient of hi-15 w/m.。C. The convective heat transfer coefficient inside the pipe to...
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe having a diameter of 187 mm and a length of 1 m and maintaining the pipe surface temperature of 96.C. The fluid is entering the pipe at a temperature of 25 C and leaving with a temperature of 76C, take Prandtl number as 12. The density and viscosity of the fluid are 1210 kg/m?, 1 x10Ns/m respectively and its thermal conductivity is 5x102 w/mk....
(13) A brewery fermentation tank 12 m in diameter is situated in a room, which has a temperature of 15°C. The tank is constructed of 10-mm welded steel plate with 12-mm glass lining. The temperature at the inner surface of the glass lining is 50°C. Assume that the convective resistance offered by the air film on the outside of the tank equals the combined resistance of the glass and steel. The thermal conductivity of glass is 0.80 W/mK and that...
Most questions answered within 3 hours.
-
You have a 825.3 mL sample of 2.754 M HA (Ka =
4.49⋅10−4). Calculate the pH...
asked 11 minutes ago -
The blues made its way into many kinds of music. Eric Clapton,
The Beatles, and Elvis...
asked 2 hours ago -
8. A wave in a string has a wave function given by: y (x, t) =...
asked 1 hour ago -
If you’re standing at the bottom of a hill and asked to evaluate
it while being...
asked 3 hours ago -
1. Which region has taken the lead in the world of
e-waste handling?
a) European Union...
asked 3 hours ago -
A 8.15- g bullet from a 9-mm pistol has a velocity of 366.0 m/s.
It strikes...
asked 4 hours ago -
The outstanding bonds of Alpha Extracts have a yield to maturity
of 7.4 percent and a...
asked 4 hours ago -
The Problem: The Case of the Harmonizing Vacations
Your CEO is exploring partnering with a European...
asked 5 hours ago -
A chemical equation is balanced by adding coefficients in front
of some formulas so that the...
asked 5 hours ago -
From the literature (reference your sources): What are the
lattice parameters of calcite and aragonite? Why...
asked 6 hours ago -
Your system is rejecting the question am asking which is
preceded by a case study. It...
asked 6 hours ago -
3. On January 2, 2000, Larry creates a trust with himself as
trustee. Larry as trustee...
asked 6 hours ago