The input voltage of the single-phase SCR converter of Fig.1 is 240 V, 50 Hz.
Homework Answers
Request Answer!
We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
Add Answer to:
The input voltage of the single-phase SCR converter of Fig.1 is 240 V, 50 Hz.
Q2: A single-phase 10 KVA, 2400/240 V, 50 Hz transformer used in distribution network has the...
Q2: A single-phase 10 KVA, 2400/240 V, 50 Hz transformer used in distribution network has the following wattmeter reading: (10 X 3 = 30 Marks) Open-circuit Test wattmeter reading: 100 W (at rated voltage) Short-circuit Test wattmeter reading: 60 W (test conducted at 50% load condition) (a) Calculate the efficiency of the transformer when it delivers full load at 0.8 pflagging. (b) Calculate the output when transformer operating at maximum efficiency and also calculate the maximum efficiency. (c) Load on...
a) Find the magnitude of the input voltage in (V): A 60 Hz 20kVA 8000/240 Vrms...
a) Find the magnitude of the input voltage in (V):
A 60 Hz 20kVA 8000/240 Vrms transformer has the equivalent circuit parameters given in the table below; Primary resistance econdary resistance Primary leakage reactance Secondary leakage reactance Magnetizing reactance Ri R2 X1 = wL1 X2 = wL2 Xm = wLm 15 12 0.02 S2 120 12 0.15 12 30 kN2 Core-loss resistance 200 kS2
A single phase motor draws a current of 30 A from a 240 V, 60 Hz....
A single phase motor draws a current of 30 A from a 240 V, 60 Hz. line. Refer to Problem Description 7.2. A capacitor with a reactance of 31 Ω is then connected in parallel with the motor. A Wattmeter connected to the circuit gives a reading of 5.4 kW. How much reactive power does the capacitor deliver? How much net reactive power remains in the circuit? How much apparent power does the circuit now consume? What is the power...
An AC-AC converter with a thyristor connected to a 250 V (phase-neutral) and 50 Hz source...
An AC-AC converter with a thyristor connected to a 250 V (phase-neutral) and 50 Hz source is Y-connected. It feeds a 3-phase resistor. Circuit losses are neglected. Load resistance is 10 Ω / phase, α trigger angle is ?/6rad. Accordingly a) Calculate the effective values of the output voltage, output current and output power of the converter. b) Find the total reactive and total harmonic powers for the α angle value you obtained. c) Calculate the phase shift angle, phase...
A 240 volts 50 Hz single phase ac source supplies a series load consisting of a...
A 240 volts 50 Hz single phase ac source supplies a series load consisting of a resistor (40 ohms), a reactor (127.324 mH) and a capacitor (318.3 μF). Calculate the current and real power delivered by the source. Calculate the voltage developed across each the three load circuit components.
1) A single-phase 50-kVA, 2400/240 volt, 60 Hz distribution transformer is used as a step-down tr...
1) A single-phase 50-kVA, 2400/240 volt, 60 Hz distribution transformer is used as a step-down transformer at the load end of a 2400-volt feeder whose series impedance is (1.0+2.0) Ω. The equivalent series impedance of the transformer is (10+j25) Ω referred to the high voltage (primary) side. The transformer is delivering rated load at 0.8 power factor lagging and at rated secondary volitage. Neglect the transformer exciting curent. Using the transtormer raltings as base quantities work this problem in per...
3.10 A 240/120 V, 4.8 kVA, 60 Hz, single-phase transformer is used to supply a 4.8...
3.10 A 240/120 V, 4.8 kVA, 60 Hz, single-phase transformer is used to supply a 4.8 kVA resistive load (i.e., the load has a power factor of 1.0) at rated voltage of 120 V a) If you assume the transformer is ideal, what would be the magni- tude of the expected primary side (240 V side) current? b) Again, if you assume the transformer is ideal, what is the apparent impedance of the load viewed from the high-voltage side of...
Problem #4-The primaries of two ideal 240/120 v, 60 Hz single phase transformers are connected in...
Problem #4-The primaries of two ideal 240/120 v, 60 Hz single phase transformers are connected in series and the combination is fed from a 480 v supply. The secondary of one transformer is connected to a resistance of 10 ohms and the secondary of the other to a resistance of 20 ohms. a-Calculate the currents in the two resistors. b-How does the 480 v divide between the primaries of the two transformers?
Design a buck converter with the following specifications: Input voltage = 311 V Output voltage =...
Design a buck converter with the following specifications: Input voltage = 311 V Output voltage = 48 V Output voltage ripple = +/- 0.1% Maximum output current = 10 A Inductor current ripple = 5% Switching frequency = 100 kHz a) Select the inductor and the output capacitor and show a capture of the behaviour b) Calculate power losses assuming a rising time of 100 ns, a falling time of 100 ns, and Rdson = 10 mΩ. c) Calculate output...
Al. A 1 kVA single-phase step-down transformer is connected to a 220 V, 50 Hz A.C....
Al. A 1 kVA single-phase step-down transformer is connected to a 220 V, 50 Hz A.C. source and delivers power to a load. The winding resistance and reactance at secondary side are 0.02 2 and 0.1 12 respectively. The maximum value of core flux is 0.248 mWb and the secondary winding contains 1000 turns. Evaluate a. b. the voltage induced on the secondary side; the turn ratio of primary side to secondary side; the rated current on both sides; and...
Q2: A single-phase 10 KVA, 2400/240 V, 50 Hz transformer used in distribution network has the following wattmeter reading: (10 X 3 = 30 Marks) Open-circuit Test wattmeter reading: 100 W (at rated voltage) Short-circuit Test wattmeter reading: 60 W (test conducted at 50% load condition) (a) Calculate the efficiency of the transformer when it delivers full load at 0.8 pflagging. (b) Calculate the output when transformer operating at maximum efficiency and also calculate the maximum efficiency. (c) Load on...
a) Find the magnitude of the input voltage in (V):
A 60 Hz 20kVA 8000/240 Vrms transformer has the equivalent circuit parameters given in the table below; Primary resistance econdary resistance Primary leakage reactance Secondary leakage reactance Magnetizing reactance Ri R2 X1 = wL1 X2 = wL2 Xm = wLm 15 12 0.02 S2 120 12 0.15 12 30 kN2 Core-loss resistance 200 kS2
1) A single-phase 50-kVA, 2400/240 volt, 60 Hz distribution transformer is used as a step-down transformer at the load end of a 2400-volt feeder whose series impedance is (1.0+2.0) Ω. The equivalent series impedance of the transformer is (10+j25) Ω referred to the high voltage (primary) side. The transformer is delivering rated load at 0.8 power factor lagging and at rated secondary volitage. Neglect the transformer exciting curent. Using the transtormer raltings as base quantities work this problem in per...
3.10 A 240/120 V, 4.8 kVA, 60 Hz, single-phase transformer is used to supply a 4.8 kVA resistive load (i.e., the load has a power factor of 1.0) at rated voltage of 120 V a) If you assume the transformer is ideal, what would be the magni- tude of the expected primary side (240 V side) current? b) Again, if you assume the transformer is ideal, what is the apparent impedance of the load viewed from the high-voltage side of...
Problem #4-The primaries of two ideal 240/120 v, 60 Hz single phase transformers are connected in series and the combination is fed from a 480 v supply. The secondary of one transformer is connected to a resistance of 10 ohms and the secondary of the other to a resistance of 20 ohms. a-Calculate the currents in the two resistors. b-How does the 480 v divide between the primaries of the two transformers?
Al. A 1 kVA single-phase step-down transformer is connected to a 220 V, 50 Hz A.C. source and delivers power to a load. The winding resistance and reactance at secondary side are 0.02 2 and 0.1 12 respectively. The maximum value of core flux is 0.248 mWb and the secondary winding contains 1000 turns. Evaluate a. b. the voltage induced on the secondary side; the turn ratio of primary side to secondary side; the rated current on both sides; and...
Most questions answered within 3 hours.
-
A construction company is planning to bid on a building
contract. The bid costs the company...
asked 2 minutes ago -
A sample of 45 observations is selected from a normal
population. The sample mean is 49,...
asked 4 minutes ago -
A firm operating in a purely competitive environment is faced
with a market price of $250....
asked 8 minutes ago -
•Let’s say someone claims the average population size is
600 feet squared and the housing authority...
asked 16 minutes ago -
Cynaide is a deadly poison that blocks the last step in the
electron transport chain of...
asked 20 minutes ago -
Your friend tells you that there is a vending machine on campus
that dispenses M&M packs...
asked 35 minutes ago -
What advantages are there to using piperidine rather than
hydroxide as a base?
asked 34 minutes ago -
7. The life of a Freeze Breeze electric fan is normally
distributed with a mean 4...
asked 37 minutes ago -
1. A 751 mL NaCl solution is diluted to a volume of 1.06 L and a...
asked 42 minutes ago -
8
A $20,000 face value STRIPS is currently quoted at 38.642 and
has 8 years to...
asked 42 minutes ago -
The current exchange rate between the Japanese yen and
the US dollar is 120 yen per...
asked 44 minutes ago -
Marla’s Massages and More bought a special massage table two
years ago for $9,300. At the...
asked 51 minutes ago