A 120-V (line-neutral) wye-connected 4-pole 60-Hz three-phase induction motor is operating at 100% of its 10-kW rated output shaft power at 5% slip. What is the frequency of the rotor electrical currents in Hz?
VL = 120
P = 4
f = 60
PL = 100 kw
S = 5%
Frequency of rotar fr = S*f
fr = 5/100 * 60
= 0.05*60
fr = 3 Hz
A 120-V (line-neutral) wye-connected 4-pole 60-Hz three-phase induction motor is operating at 100% of its 10-kW...
A three-phase 4 pole wye connected 220 V, 15 Hp, 50 Hz induction machine (rated conditions) has the following parameters per phase refereed to the stator. RI : 0.29 Ω , R2 0. 14 Ω , Xi-0.50 Ω , X2-0.20 Ω , Xm-1 0.53 Ω The total windage and core losses can be assumed to be a constant 350 W. If the machine is operating at rated voltage and frequency with a 5.5% slip, find the steady-state: (a) 10pts. Mechanical...
A 1.6-hp, 8-pole, 60-Hz, three-phase induction motor is rated for 820 rpm, 220 V rms (line-to-line), and 4.32 A (line current) at 77.0 percent lagging power factor. Find the full-load efficiency if the motor is delta-connected and if it is wye-connected.
1. A 15 hp, 4 pole, 208 V, 60 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters in Ω/phase referred to the stator: R,-0.220, Xi = 0.430, X,-15.0, R2 0.130 and X2-0.430. Mechanical and core losses amount to 300 W and 200 W respectively for rated voltage. (a) The motor is fed with a 60 Hz, 208 V voltage. It runs with a slip of 4.5 %. Find the speed, shaft torque and power, efficiency and power...
1. A 20 hp, 230 V, 60 Hz, four-pole, three-phase induction motor operating at rated load has rotor copper loss of 331 W, and a combined friction, windage, and stray power loss of 249 W. Determine, (a) Mechanical power developed; (b) Air-gap power; (c) Shaft speed; (d) Shaft torque (10 pts.)
Q4. A six-pole, three-phase, 60 Hz induction motor is operating at a speed of 1164 rev min. The input power at this speed is 33 kW and the stator copper loss is 1200 W. Find a) Slip b Airgap power c Rotor copper loss d) Developed torque e) Developed horsepower f) If the rotational losses are 500 W, find the output torque and horsepower
6.12 A three-phase, Y-connected, 460-V (line-line), 37-kW, 60-Hz, four-pole induction motor has the following equivalent-circuit parameters in ohms-per-phase referred to the statr: R10.070 R2 0.152 X 0.743 X2 0.764 Xm 40.1 The total friction and windage losses may be assumed constant at 390 W, and the core loss may be assumed to be equal to 325 W. With the motor connected directly to a 460-V source, compute the speed, output shaft torque and power, input power, and power factor and...
The input power to a 480V, 3 phase, 6 pole, 50 Hz induction motor is 75kW with a line current of 75A and runs at a slip of 2.5%. If the stator core loss is 2 kW, windage and friction loss is 1.2 kW, and the stator resistance per phase is 0.16 ohm. Calculate: a. Power supplied to the rotor (Air gap power) b. Rotor copper loss c. Shaft power d. Efficiency of the motor e. Shaft torque f What...
Question 11: (3 marks) A 6 pole, 60 Hz, star connected three-phase induction motor has a rating of Pm = 55 kW and line voltage = 420 V. The slip of the motor is 2% at 0.9 power factor lagging. If the full load efficiency is 95%, calculate the torque developed in the motor.
Question 2 (10 marks) (a) A large 3-phase, 4000 V, 60 Hz, slip of 0.01, squirrel cage induction motor draws a current of 375 A and a total active power of 2300 kW when operating at full-load. The stator is connected in wye and the resistance per phase is 0.05 12. The total iron losses are 23 kW and the windage and friction losses are 10 kW. Calculate the following: i) The power factor at full-load ii) The active power...
Question 2 (10 marks) (a) A large 3-phase, 4000 V, 60 Hz, slip of 0.01, squirrel cage induction motor draws a current of 375 A and a total active power of 2300 kW when operating at full-load. The stator is connected in wye and the resistance per phase is 0.05 12. The total iron losses are 23 kW and the windage and friction losses are 10 kW. Calculate the following: i) The power factor at full-load ii) The active power...