The ice on the rear window of an automobile is defrostedby attaching a thin, transparent, film...
The ice on the rear window of an automobile is defrostedby attaching a thin, transparent, film type heatingelement to its inner surface. By electrically heating this element, a uniform heat flux may be established at the inner surface.The insideair temperature and convection heat transfer coefficient are T,i= 25°C and hi= 25W/(m2-K), while the outsideair temperature isT,o= -10°C.For 4-mm thick window glass, determine (a) the electric power required per unit window area to maintain an inner surface temperature of 15°C and (b) the thermal conductivity of the windshield.
Homework Answers
Add Answer to:
The ice on the rear window of an automobile is defrostedby
attaching a thin, transparent, film...
Defog Rear Window
To defog therear window of an automobile, a very thintransparent heating element is attached to the inner surface of the window. A Uniformheat flux of 1300 W/m2 is provided to the heating element for defogging a rear windowwith thickness of 5 mm. The interior temperature of the automobile is 22°C and theconvection heat transfer coefficient is 15 W/m2·K. The outside ambient temperature is−5°C and the convection heat transfer coefficient is 100 W/m2·K. If the thermalconductivity of the window is 1.2...
Do part B with matlab code The rear window of an automobile is defogged by attach...
Do
part B with matlab code
The rear window of an automobile is defogged by attach ing a thin, transparent, film-type heating element to its inner surface. By electrically heating this element, a uni- form heat flux may be established at the inner surface For 4-mm-thick window glass, determine the electrical power required per unit window area to maintain arn inner surface temperature of 15°C when the interior air temperature and convection coefficient are To 25°C and hi = 10...
To defrost ice accumulated on the outer surface of an automobile windshield, warm air is blown...
To defrost ice accumulated on the outer surface of an automobile windshield, warm air is blown over the inner surface of the windshield. Consider an automobile windshield with thickness of 5 mm and thermal conductivity of 1.4 W/m K. The outside ambient temperature is -10 C and the convection coefficient is 200 W/m2-K, while the ambient temperature inside the automobile is 25 C. Determine the value of the convection heat transfer coefficient for the warm air blowing over the inner...
On a cold night the temperatures of the two surfaces of a glass windowpane in a...
On a cold night the temperatures of the two surfaces of a glass windowpane in a house are 7.8° C on the outer surface and 8.0° C on the inner surface when the air temperature is 0° C outside and 21.2° C inside. The glass is 3.33 mm thick. (The thermal conductivity for glass is 0.8 W/m-C°.) (a) Find the rate at which heat is conducted through the glass per square meter of window area. (b) Find the value of...
(2) In a manufacturing process, a transparent film is being bonded to a substrate as shown...
(2) In a manufacturing process, a transparent film is being bonded to a substrate as shown in the sketch. To cure the bond at a temperature To, a radiant source is used to provide a heat flux q"o (W/m?), all of which is absorbed at the bonded surface. The back of the substrate is maintained at T, while the free surface of the film is exposed to air at Too and a convection heat transfer coefficient h. 9 ky =...
Heat Loss Through Thermopane Double Window. A double window called thermopane is one in which two...
Heat Loss Through Thermopane Double Window. A double window called thermopane is one in which two layers of glass dry stagnant air. In a given window, each of the glass layers is 6.35 mm thick separated by a 6.35 mm space of stagnant air. The thermal conductivity of the glass is 0.869 W/m K and that of air is 0.026 over the temperature range used For a temperature drop of 27.8 K over the system, calculate the heat loss for...
In a manufacturing process, a transparent film is being bonded to a substrate as shown in...
In a manufacturing process, a transparent film is being bonded to a substrate as shown in the sketch, where Lj = 0.8 mm, with an associated k, =0.025 W/m-K and Ly =1.0 mm with an associated ks =0.05 W/m-K. To cure the bond at a temperature To, a radiant source is used to provide a heat flux d" (W/m2), all of which is absorbed at the bonded surface. The back of the substrate is maintained at T while the free...
(25pts) Consider a 1.2-m-high and 2-m-wide glass window whose thickness is 6 mm and thermal conductivity...
(25pts) Consider a 1.2-m-high and 2-m-wide glass window whose thickness is 6 mm and thermal conductivity is k 0.78 W/m °C. Determine the steady rate of heat transfer through this glass window and the temperature of its inner surface for a day during which the room is maintained at 24°C while the temperature of the outdoors is-5°C. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h 10 W/m2 °C and h...
A window glass has dimensions, 1.04 m high, 2.34 m wide and 1.341 cm thick, with a thermal conduc...
A window glass has dimensions, 1.04 m high, 2.34 m wide and 1.341 cm thick, with a thermal conductivity of 0.81 Wm10c-1. The outside- surface temperature is 32 °C and the inside-surface temperature is 24°c. Calculate the rate of heat transfer, in watts, through a plane of window glass, giving your answer to 3 decimal places.
A window glass has dimensions, 1.04 m high, 2.34 m wide and 1.341 cm thick, with a thermal conductivity of 0.81 Wm10c-1. The outside-...
Problem 1 (25 points) In an experiment to measure heat transfer coefficients, a very thin foil...
Problem 1 (25 points) In an experiment to measure heat transfer coefficients, a very thin foil of low emissivi attached to a slab of material with low thermal conductivity. The other surface of the metal foil is exposed to convection heat transfer by fluid flowing over the foil surface. The slab on which the metal foil is attached has a thickness of 30 mm and a thermal conductivity of 0.023 W/m K in a condition where the surrounding room temperature...
Do
part B with matlab code
The rear window of an automobile is defogged by attach ing a thin, transparent, film-type heating element to its inner surface. By electrically heating this element, a uni- form heat flux may be established at the inner surface For 4-mm-thick window glass, determine the electrical power required per unit window area to maintain arn inner surface temperature of 15°C when the interior air temperature and convection coefficient are To 25°C and hi = 10...
To defrost ice accumulated on the outer surface of an automobile windshield, warm air is blown over the inner surface of the windshield. Consider an automobile windshield with thickness of 5 mm and thermal conductivity of 1.4 W/m K. The outside ambient temperature is -10 C and the convection coefficient is 200 W/m2-K, while the ambient temperature inside the automobile is 25 C. Determine the value of the convection heat transfer coefficient for the warm air blowing over the inner...
(2) In a manufacturing process, a transparent film is being bonded to a substrate as shown in the sketch. To cure the bond at a temperature To, a radiant source is used to provide a heat flux q"o (W/m?), all of which is absorbed at the bonded surface. The back of the substrate is maintained at T, while the free surface of the film is exposed to air at Too and a convection heat transfer coefficient h. 9 ky =...
Heat Loss Through Thermopane Double Window. A double window called thermopane is one in which two layers of glass dry stagnant air. In a given window, each of the glass layers is 6.35 mm thick separated by a 6.35 mm space of stagnant air. The thermal conductivity of the glass is 0.869 W/m K and that of air is 0.026 over the temperature range used For a temperature drop of 27.8 K over the system, calculate the heat loss for...
In a manufacturing process, a transparent film is being bonded to a substrate as shown in the sketch, where Lj = 0.8 mm, with an associated k, =0.025 W/m-K and Ly =1.0 mm with an associated ks =0.05 W/m-K. To cure the bond at a temperature To, a radiant source is used to provide a heat flux d" (W/m2), all of which is absorbed at the bonded surface. The back of the substrate is maintained at T while the free...
(25pts) Consider a 1.2-m-high and 2-m-wide glass window whose thickness is 6 mm and thermal conductivity is k 0.78 W/m °C. Determine the steady rate of heat transfer through this glass window and the temperature of its inner surface for a day during which the room is maintained at 24°C while the temperature of the outdoors is-5°C. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h 10 W/m2 °C and h...
A window glass has dimensions, 1.04 m high, 2.34 m wide and 1.341 cm thick, with a thermal conductivity of 0.81 Wm10c-1. The outside- surface temperature is 32 °C and the inside-surface temperature is 24°c. Calculate the rate of heat transfer, in watts, through a plane of window glass, giving your answer to 3 decimal places.
A window glass has dimensions, 1.04 m high, 2.34 m wide and 1.341 cm thick, with a thermal conductivity of 0.81 Wm10c-1. The outside-...
Problem 1 (25 points) In an experiment to measure heat transfer coefficients, a very thin foil of low emissivi attached to a slab of material with low thermal conductivity. The other surface of the metal foil is exposed to convection heat transfer by fluid flowing over the foil surface. The slab on which the metal foil is attached has a thickness of 30 mm and a thermal conductivity of 0.023 W/m K in a condition where the surrounding room temperature...
Most questions answered within 3 hours.
-
C - Language
Write a loop that sets each array element to the sum of itself...
asked 34 minutes ago -
(63
#14)
which of the following statments best describes how chamging
the concentration of the substances...
asked 4 hours ago -
In the following reaction, which element is undergoing
oxidation: Na2SO3 + N2O --> N2 + Na2SO4...
asked 4 hours ago -
Which of the following pairs of ions have the same electron
configuration?
I: Br− and Se2−...
asked 7 hours ago -
The Foremost Composite Materials Company is planning a two-day
sales conference for October 19-20. The conference...
asked 7 hours ago -
3) Illustrate the observed pattern of relatedness of organisms
versus adaptations to specific conditions. This means...
asked 8 hours ago -
In winter a lake has a 0.35 m thick ice layer over 1.10 m of
water....
asked 9 hours ago -
Assuming the following has been encrypted with a Vigenere cipher
below, use the method(s) and assumptions...
asked 9 hours ago -
How would I use switch statements to write a program that will
take an input of...
asked 9 hours ago -
Imagine a reaction in which methane gas combusts at a constant
pressure of 1 atm and...
asked 9 hours ago -
Two parallel wires (each 12 m in length) are separated by a
distance of 0.065 m...
asked 9 hours ago -
Suppose there were three masses at the corner of uniform
equilateral triangle. The masses are m1...
asked 9 hours ago