Homework Answers
n
Add Answer to:
Air enters a two-stage compressor at 300 K and 101 kPa. The pressure ratio of each...
Problem 1 A Brayton-cycle power plant takes in air at 100 kPa and 26.7°C. Compression in two stag...
please solve by exact analysis
Problem 1 A Brayton-cycle power plant takes in air at 100 kPa and 26.7°C. Compression in two stages with intercooling, and each stage has a pressure ratio of 2.38 and an efficiency of 84%, with intercooling to 26.7°C The maximum temperature of the cycle is 676.7°C Turbine efficiency is 82%. The turbine and compressor are assumed adiabatic. A regenerator heats the compressed air to 326.7°C before sending it to the combustor. Calculate (a) the back...
A compressor works on a pressure of 105 kPa and temperature 300 K in a Brayton...
A compressor works on a pressure of 105 kPa and temperature 300 K in a Brayton cycle and has an efficiency of 45%. The exhaust temperature is 700 K. Find the pressure ratio and the specific heat addition by the combustion for this cycle. The inlet pressure of an air compressor is 100 kPa, with temperature 290 K, and brings it to 600 kPa, after which the air is cooled in an intercooler to 330K by heat transfer to the...
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and...
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and 300 K to an exit pressure of 900 kPa. Determine the compressor work per unit mass for (a) isentropic compression with k 1.4, (b) a compressor with 85% isentropic efficiency, (c) two-stage compression (100 kPa to 300 kPa, and 300 kPa to 900 kPa) with intercooling with an isentropic efficiency of 85% for both compressors. (50 points) 2.
Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with...
Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with a volumetric flow rate of 7.5 m3/s. The compressor pressure ratio is 10. The turbine inlet temperature is 1400 K. Determine the following: The thermal efficiency of the cycle The back work ratio The net power developed in kW
Air enters the compressor of a cold air-standard Brayton cycle at 100 kpa, 300 k, with...
Air enters the compressor of a cold air-standard Brayton cycle at 100 kpa, 300 k, with a mass flow rate of 6 kg/s. the compressor pressure ratio is 10, and the turbine inlet temperature is 1400 K. For k = 1.4, calculate a. The thermal efficiency of the cycle b. The back work ratio c. The net power developed, in kW d. Reconsider the above with an ideal regenerator.
Question 10 10 pts A gas turbine operates with a two stage air compressor incorporating intercooling,...
Question 10 10 pts A gas turbine operates with a two stage air compressor incorporating intercooling, the pressure ratio and the air inlet temperature of 20°C is the same for both stages. The overall compression ratio is 10:1. The isentropic efficiency of both stages is 89.0% For air take y=1.4 and Co=1.005 KJ/kg.k Determine the specific work required to drive both compressors, your answer should be in KJ/kg to 1 decimal place. DO NOT INCLUDE UNITS IN YOUR ANSWER 5...
2. Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K,...
2. Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with a volumetnc flow rate of 20 m'/s. The turbine inlet temperature is 1500 K. For compressor pressure ratios of 20 find a) the heat addition and rejection in kW b) the net power developed, in kW c) the thermal efficiency of the cycle d) the back work ratio.
Air enters the compressor of a cold air-standard Brayton cycle with regeneration at 100 kPa, 300...
Air enters the compressor of a cold air-standard Brayton cycle with regeneration at 100 kPa, 300 K, with a volume flow rate of 5 m3/s. The compressor pressure ratio is 8, and the turbine inlet temperature is 1400 K. The turbine and compressor each have isentropic efficiencies of 80% and the regenerator effectiveness is 80%. For the air, k = 1.4 and the ambient temperature is T0 = 300 K. -Determine the thermal efficiency of the cycle. -determine the back...
Air enters a compressor operating at steady state at a pressure of 100 kPa, a temperature...
Air enters a compressor operating at steady state at a pressure of 100 kPa, a temperature of 290 K, and with a mass flow rate of 0.72 kg/s. At the exit, the pressure is 700 kPa and the temperature is 450 K. Heat transfer from the compressor to its surroundings occurs at a rate of 3 kW. Kinetic and potential energy changes can be ignored. Determine the power input to the compressor, in kW. Assume that the air is an...
The refrigerant gas which is air, enters the compressor of a Brayton refrigeration cycle at 101...
The refrigerant gas which is air, enters the compressor of a Brayton refrigeration cycle at 101 kPa, 280 K. If the compressor pressure ratio is 5 and the turbine inlet temperature is 330 K. The compressor has an isentropic efficiency of 70% and the turbine has an isentropic efficiency of 80%. Using air table rather than constant-specific-heat theory, determine (a) the net work input per unit mass of air flow, (b) the refrigeration capacity, in kJ/kg, (c) the coefficient of...
please solve by exact analysis
Problem 1 A Brayton-cycle power plant takes in air at 100 kPa and 26.7°C. Compression in two stages with intercooling, and each stage has a pressure ratio of 2.38 and an efficiency of 84%, with intercooling to 26.7°C The maximum temperature of the cycle is 676.7°C Turbine efficiency is 82%. The turbine and compressor are assumed adiabatic. A regenerator heats the compressed air to 326.7°C before sending it to the combustor. Calculate (a) the back...
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and 300 K to an exit pressure of 900 kPa. Determine the compressor work per unit mass for (a) isentropic compression with k 1.4, (b) a compressor with 85% isentropic efficiency, (c) two-stage compression (100 kPa to 300 kPa, and 300 kPa to 900 kPa) with intercooling with an isentropic efficiency of 85% for both compressors. (50 points) 2.
Air enters the compressor of a cold air-standard Brayton cycle at 100 kpa, 300 k, with a mass flow rate of 6 kg/s. the compressor pressure ratio is 10, and the turbine inlet temperature is 1400 K. For k = 1.4, calculate a. The thermal efficiency of the cycle b. The back work ratio c. The net power developed, in kW d. Reconsider the above with an ideal regenerator.
Question 10 10 pts A gas turbine operates with a two stage air compressor incorporating intercooling, the pressure ratio and the air inlet temperature of 20°C is the same for both stages. The overall compression ratio is 10:1. The isentropic efficiency of both stages is 89.0% For air take y=1.4 and Co=1.005 KJ/kg.k Determine the specific work required to drive both compressors, your answer should be in KJ/kg to 1 decimal place. DO NOT INCLUDE UNITS IN YOUR ANSWER 5...
2. Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with a volumetnc flow rate of 20 m'/s. The turbine inlet temperature is 1500 K. For compressor pressure ratios of 20 find a) the heat addition and rejection in kW b) the net power developed, in kW c) the thermal efficiency of the cycle d) the back work ratio.
Air enters a compressor operating at steady state at a pressure of 100 kPa, a temperature of 290 K, and with a mass flow rate of 0.72 kg/s. At the exit, the pressure is 700 kPa and the temperature is 450 K. Heat transfer from the compressor to its surroundings occurs at a rate of 3 kW. Kinetic and potential energy changes can be ignored. Determine the power input to the compressor, in kW. Assume that the air is an...
Most questions answered within 3 hours.
-
) Assume that in the market for widgets, demand is highly
elastic compared to supply. If...
asked 1 minute from now -
Why is a personal interview the most important step in the sales
selection process? What are...
asked 8 minutes ago -
In Python rOverlap (x1, y1, w1, h1, x2, y2, w2, h2) A rectangle
is axis-aligned if...
asked 8 minutes ago -
If we observe in a protein solution that DNA is causing a
mixture 260/280 ratio ~0.9,...
asked 19 minutes ago -
Explain the steps involved in making cDNA from mRNA, and how you
would create a cDNA...
asked 19 minutes ago -
A beta (β) particle is described by which of the following?
Select the correct answer below:...
asked 22 minutes ago -
A new machine costs $150,000, lasts 10 years, has an annual
O&M cost of $50,000, and...
asked 25 minutes ago -
A newspaper in a large Midwestern city reported that the
National Association of Realtors said that...
asked 27 minutes ago -
1. Develop a use case diagram for the bank case study described
in Chapter 1. 2....
asked 37 minutes ago -
The phylum Protista has often been referred to as a junk drawer
of classification. Explain what...
asked 43 minutes ago -
The average amount of money spent for lunch per person in the
college cafeteria is $7.09...
asked 45 minutes ago -
You follow the lab procedure and at the end of Part 4C, you used
an average...
asked 1 hour ago