A gardener feels it is taking too long to water a garden with a - in....
Water flows at 0.25 L/s through a 12-m-long garden hose 2.0 cm in diameter that is lying flat on the ground. Part A The temperature of the water is 20 ∘C. What is the gauge pressure of the water where it enters the hose?
Water flows at 0.25 L/s through a 7.0- m -long garden hose 2.0 cm in diameter that is lying flat on the ground. The temperature of the water is 20 ∘ C . What is the gauge pressure of the water where it enters the hose?
Water flows at 0.20 L/s through a 12-m-long garden hose 2.5 cm in diameter that is lying flat on the ground. The temperature of the water is 20 ∘C. What is the gauge pressure of the water where it enters the hose?
PRACTICE IT Use the worked example above to help you solve this problem. A water hose 2.15 cm in diameter is used by a gardener to fill a 31.0-liter bucket. (One liter = 1,000 cm.) The gardener notices that it takes 1.00 min to fill the bucket. A nozzle with an opening of cross-sectional area 0.500 cmis then attached to the hose. The nozzle is held so that water is projected horizontally from a point 1.00 m above the ground....
LEARN MORE REMARKS It's interesting that the motion of fluids can be treated with the same kinematics equations as individual objects. QUESTION By what factor would the range be changed if the flow rate were doubled? ***** * * ****** PRACTICE IT Use the worked example above to help you solve this problem. A water hose 2.20 cm in diameter is used by a gardener to fill a 33.0-liter bucket. (One liter = 1,000 cm?.) The gardener notices that it...
need help b) and d) A long, horizontal hose of diameter 4.8 cm is connected to a faucet. At the other end, there is a nozzle of diameter 2 cm. Water squirts from the nozzle at velocity 14 m/sec. Assume that the water has no viscosity or other form of energy dissipation. a) What is the velocity of the water in the hose ? m/s Help Reset Enter * 2.43 2.43 OK b) How long will it take to fill...
In order to provide a steady flow of water to small plants in your garden, you have decided to build a DIY homemade watering system. You have your watering sytem by taking several 5 gallon buckets and drilled a 1/8" hole at the very bottom of each bucket.In this way, water will use gravity to flow out when watering your plant. The cheapest and convenient bucket you found at a convenient store has a shape of a truncated cone as...
Problem la: A volume of 10 in. long, 5 in. wide and 0.5 in. thick is to be removed by a face milling cutter. The cutter is 3 in diameter and has a six teeth. The maximum depth of cut is 0.3 in. Assume feed -0.1 ipr and cutting speed - 200 fpm. What are the feed speed, spindle rpm and cutting time? Problem 1b: 0.95 The cutting force for turning a stainless-steel shaft using HSS tool can be predicted...
Water, with density of 1000 kg/m3 and kinematic viscosity of 1.0 x 10- m2/s, is pumped through a total length of 60 m of pipe from a lower reservoir to a higher reservoir. The inner diameter of the pipe is 30 cm. Both reservoirs are open to the atmosphere, and the water surface of the higher reservoir is 10 m above that of the lower reservoir. The entrance from the lower reservoir to the pipe is sharp-edged, and along the...
The Striving for Perfection Urgent Care Center feels that its patients wait time is too long. The staff has noticed that increasing numbers of people are waiting longer in the waiting room. The national benchmark performance is 90 minutes or less from the time the customer arrives to the time the customer is treated and discharged. Part I The staff decides to examine the time it takes for all patients to move through their service process on two successive days...