We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
A tank containing water has a cross section area of 4 m2 and is open to...
Please do everything neetly 5. An open tank of very large cross section area cross section area a A is filled with water to a height 6.5 cm2 tank allows bott n the bottom of the tank allows water to dran id at is the volume flow rate at which water flows out b) At what distance below the bottom of the tank is the cross- one-half of the area of the hole? If A-10000a, how long will it take...
4. A tank is filled with incompressible oil to a depth of (h) 6.43 m open tank The tank is being drained via a horizontal pipe that is attached at a height of (h2) 0.789 m above the tank bottom. Oil is flowing out of the tank into the pipe at a rate of 2.34 x 10 m'/s, but the tank is so large that the descent speed of the oil level at the top is negligible (0) The gauge...
A tank, which is open to the atmosphere, is filled with water to a level h and allowed to drain through an orifice at the bottom, as shown in the figure below. The cross-sectional area of the tank is At and the cross-sectional area of the orifice is Ao. Assume that the cross-sectional area of the tank is much greater than the cross-sectional area of the orifice (Ar>>Ao) and that the exit losses are negligible. 4) Use Reynolds Transport Theorem...
A fluid in a tank has a specific gravity of 0.76 and a absolute pressure at the top 150 kPa and a gauge pressure at the bottom of 140 kPa. 1) Draw a figure showing the manometer readings 2) What is the level of liquid in the tank? 12:55 PM
A piston having a cross-sectional area of 0.06 m2 is located in a cylinder containing water as shown in the figure below. An open U-tube manometer is connected to the cylinder as shown. For h1 = 300 mm and h = 500 mm, what is the value of the applied force, P, acting on the piston? The weight of the piston is negligible. A piston having a cross-sectional area of 0.06 m2 is located in a cylinder containing water as...
A pressurized tank of water has a 9-cm-diameter orifice at the bottom, where water discharges to the atmosphere. The water level is 2.5 m above the outlet. The tank air pressure above the water level is 250 kPa (absolute), while the atmospheric pressure is 100 kPa. Neglecting frictional effects, determine the initial discharge rate of water from the tank. -Air 250 kPa 2.5 m d cm The initial discharge rate of water from the tank is determined to be [...
A column of water in a vertical pipe has a cross sectional area of 528 m2 and a weight of 0.2 N. (a) What is the increase in pressure (in Pa) from the top to the bottom of the pipe?
Due Date: Group: Process Instrumentation -Lab 4 Exercise 7. psi An open atmospheric vessel containing an unknown mixture, A direct level measurement determined the level h 30.9 ft. Bottom tank pressure P. gauge reads 11.7 psig. The density of the material is unknown. Known: • specific weight of water is 62.43 lbs/ft. • External pressure is 1 atm • P=SGxh a is the material water? Yes No b. Explain why and show work that validates your answer: c. Determine the...
A container of water has a cross-sectional area of A = 0.1 m^2. A piston sits on top of the water (see the following figure). There is a spout located 0.15 m from the bottom of the tank, open to the atmosphere, and a stream of water exits the spout. The cross sectional area of the spout is A_s = 7.0 times 10^-4 m^2. (a) What is the velocity of the water as it leaves the spout? (b) If the...
.Emergency Coolant Injection from an Accumulator Tank (8 marks) Consider an accumulator tank with a cross sectional area of A,-10m, and a height of H-6m, initially filled with 5m of water as shown in the figure. The top of the tank is closed and filled with air at an initial pressure of P, 1,101 kPa At time -Os, the water starts to discharge from an opening at the bottom of the tank with an opening area of A2 0.001m2. The...