Water is flowing through a 600mm diameter horizontal pipe n = 0.013 and 1000m in length....
Water is flowing through a 600mm diameter horizontal pipe n = 0.013 and 1000m in length. A gage
pressure downstream has a reading of 16 kPa and another gage in between the ends of the pipe reads 20
kPa while on the upstream side reads 30 kPa.
a. Determine the total head loss of the pipe
b. Determine the velocity of flow in m/s.
c. Determine the rate of discharge in liter per second.
Homework Answers
Add Answer to:
Water is flowing through a 600mm diameter horizontal pipe n =
0.013 and 1000m in length....
A flow nozzle equipped with a differential pressure gage is used to measure the flow rate of water at 10°C (p 9997 kg/m3 and p 1.307 x 10-3 kg/m s) through a 3-cm-diameter horizontal pipe. The nozzle...
A flow nozzle equipped with a differential pressure gage is used to measure the flow rate of water at 10°C (p 9997 kg/m3 and p 1.307 x 10-3 kg/m s) through a 3-cm-diameter horizontal pipe. The nozzle exit diameter is 1.5 cm, and the measured pressure drop is 3.3 kPa. Determine the volume flow rate of water, the average velocity through the pipe, and the head loss 1.5 cm Differential pressure gage -3 m3(s m/s The volume flow rate of...
Water is flowing through a horizontal pipe with an inside diameter of 8.00cm. The pipe narrows...
Water is flowing through a horizontal pipe with an inside diameter of 8.00cm. The pipe narrows to an inside diameter of 3.75cm. Assume the water is an ideal incompressible fluid. What is the velocity of the fluid initially, v_1 (when It is flowing in the 8.00cm diameter section) if the velocity of the water in the narrow part of the pipe is measured at V_2 = 27m/s? If the initial pressure is known to be 670 kPa what is the...
Q8 A horizontal pipe 50 mm diameter is fitted with a venturi tube, which has a...
Q8 A horizontal pipe 50 mm diameter is fitted with a venturi tube, which has a throat diameter of 40 mm. The pipe carries water at a pressure of 30 kPa gauge and velocity 3 m/s upstream of the throat. Determine: a. The mass flow rate; b. The velocity at the throat C. The pressure at the throat ignoring head losses: d. The pressure at the throat if a head loss equal to 5% of the total head occurs as...
A 600mm diameter horizontal pipe of length 2km branches into two pipes of 300mm and 450mm...
A 600mm diameter horizontal pipe of length 2km branches into two pipes of 300mm and 450mm diameter, each 1.6km long (Fig. Q5). The 600mm pipe is at an elevation of 30m and connects reservoir A with water level 50m. The two branched pipes connects reservoir B with water level 100m. A pump is installed in the 600mm pipe and causes the flow from A to B. Calculate the required power of the pump to maintain a flow rate of Im®/s...
Water at 20 C is steadily flowing through a diverging pipe section that is inclined by...
Water at 20 C is steadily flowing through a diverging pipe section that is inclined by an angle of 30° with respect to the horizontal (See the figure) The total testing section length is 20 m long with an initial pipe diameter of 10 mm (Section 1) and final diameter of 20 mm (Section 2). The small diameter section shows a gage pressure of 100 kPa and average flow velocity 10 m/s. Other values will be obtained by reaching complete...
H2.3 Consider water at 20°C flowing through a horizontal pipe of diameter 15 cm and length 10 m. ...
H2.3 Consider water at 20°C flowing through a horizontal pipe of diameter 15 cm and length 10 m. The flowrate is 0.021 m3/s and the wall shear stress is 5.76 N/m2. Assume fully developed flow. a. Verify that the flow is turbulent b. Determine the pressure drop [N/m2 c. Estimate the viscous sublayer thickness [mm], i.e., where y+ 5 d. Compare results of part c. with typical pipe roughness (see Table 8.1 in text and comment on implication e. Using...
Water at 200 C is steadily flowing an angre) verging pipe section that is inclined by...
Water at 200 C is steadily flowing an angre) verging pipe section that is inclined by the figtun an C is steadily flowing throle of ong with an diameter of 10 mm C2. The kPa ction 2). The smal pect to the horizontal (See initial testing sectio The total testing section length is 2ction small final diameter of 20 mm (Seetion2 of 100 diameter section shows a gage presas. Other ibriun D2 20 mm and average flow velocity will be...
Paragraph Drawing Water (p = 1000 kg/m3) is accelerated from rest in a horizontal pipe that...
Paragraph Drawing Water (p = 1000 kg/m3) is accelerated from rest in a horizontal pipe that is 80 m long! and 30 cm in diameter. If the acceleration rate (toward the downstream end) is 5 m/s?! what is the pressure at the upstream end if the pressure at the downstream end is 90 kPa gage? What is the net force?
Oil is flowing through a horizontal pipe expansion. In the small section, the pipe has a...
Oil is flowing through a horizontal pipe expansion. In the small section, the pipe has a diameter of 0.6 meters and a pressure of 500 kPa. If the pipe expands to a diameter of 1.8 meters, what is the pressure in the expanded pipe section. (Assume the oil flow rate is 65 m3/min and oil density is 900 kg/m3) A 23,988.724 kPa B 7.024646 kPa C 493.312238 kPa D 506.524646 kPa
please solve 25 in detail 24. Water is flowing through a 7500-m long, 0.90-m diameter commercial...
please solve 25 in detail
24. Water is flowing through a 7500-m long, 0.90-m diameter commercial steel pipe in its best condition. At the upstream end of the pipe, the elevation head is 83.5 m and the pressure head is 12.3m. At the downstream end of the pipe, the elevation head is 0 m and the pressure head is 88.7 m. Use the Hazen Williams equation to solve for the flow rate in this pipe. Answer: Q = 0.73 m2/s....
A flow nozzle equipped with a differential pressure gage is used to measure the flow rate of water at 10°C (p 9997 kg/m3 and p 1.307 x 10-3 kg/m s) through a 3-cm-diameter horizontal pipe. The nozzle exit diameter is 1.5 cm, and the measured pressure drop is 3.3 kPa. Determine the volume flow rate of water, the average velocity through the pipe, and the head loss 1.5 cm Differential pressure gage -3 m3(s m/s The volume flow rate of...
Water is flowing through a horizontal pipe with an inside diameter of 8.00cm. The pipe narrows to an inside diameter of 3.75cm. Assume the water is an ideal incompressible fluid. What is the velocity of the fluid initially, v_1 (when It is flowing in the 8.00cm diameter section) if the velocity of the water in the narrow part of the pipe is measured at V_2 = 27m/s? If the initial pressure is known to be 670 kPa what is the...
Q8 A horizontal pipe 50 mm diameter is fitted with a venturi tube, which has a throat diameter of 40 mm. The pipe carries water at a pressure of 30 kPa gauge and velocity 3 m/s upstream of the throat. Determine: a. The mass flow rate; b. The velocity at the throat C. The pressure at the throat ignoring head losses: d. The pressure at the throat if a head loss equal to 5% of the total head occurs as...
A 600mm diameter horizontal pipe of length 2km branches into two pipes of 300mm and 450mm diameter, each 1.6km long (Fig. Q5). The 600mm pipe is at an elevation of 30m and connects reservoir A with water level 50m. The two branched pipes connects reservoir B with water level 100m. A pump is installed in the 600mm pipe and causes the flow from A to B. Calculate the required power of the pump to maintain a flow rate of Im®/s...
Water at 20 C is steadily flowing through a diverging pipe section that is inclined by an angle of 30° with respect to the horizontal (See the figure) The total testing section length is 20 m long with an initial pipe diameter of 10 mm (Section 1) and final diameter of 20 mm (Section 2). The small diameter section shows a gage pressure of 100 kPa and average flow velocity 10 m/s. Other values will be obtained by reaching complete...
H2.3 Consider water at 20°C flowing through a horizontal pipe of diameter 15 cm and length 10 m. The flowrate is 0.021 m3/s and the wall shear stress is 5.76 N/m2. Assume fully developed flow. a. Verify that the flow is turbulent b. Determine the pressure drop [N/m2 c. Estimate the viscous sublayer thickness [mm], i.e., where y+ 5 d. Compare results of part c. with typical pipe roughness (see Table 8.1 in text and comment on implication e. Using...
Water at 200 C is steadily flowing an angre) verging pipe section that is inclined by the figtun an C is steadily flowing throle of ong with an diameter of 10 mm C2. The kPa ction 2). The smal pect to the horizontal (See initial testing sectio The total testing section length is 2ction small final diameter of 20 mm (Seetion2 of 100 diameter section shows a gage presas. Other ibriun D2 20 mm and average flow velocity will be...
Paragraph Drawing Water (p = 1000 kg/m3) is accelerated from rest in a horizontal pipe that is 80 m long! and 30 cm in diameter. If the acceleration rate (toward the downstream end) is 5 m/s?! what is the pressure at the upstream end if the pressure at the downstream end is 90 kPa gage? What is the net force?
please solve 25 in detail
24. Water is flowing through a 7500-m long, 0.90-m diameter commercial steel pipe in its best condition. At the upstream end of the pipe, the elevation head is 83.5 m and the pressure head is 12.3m. At the downstream end of the pipe, the elevation head is 0 m and the pressure head is 88.7 m. Use the Hazen Williams equation to solve for the flow rate in this pipe. Answer: Q = 0.73 m2/s....
Most questions answered within 3 hours.
-
A 3.0 µg charged particle carrying -25 µC is injected along the
+x direction into a...
asked 3 minutes ago -
You are given a vector in the xy plane that has a magnitude of
81.0 units...
asked 28 minutes ago -
Describe how a multiplexer and de-multiplexer work together.
Give at least two advantages and two disadvantages...
asked 15 minutes ago -
t1
Paolucci Corporation's relevant range of activity is 6,000 units
to 13,000 units. When it produces...
asked 18 minutes ago -
Hedge Row Bank has the following balance sheet (in
millions):
Assets
$170
Liabilities
$102
Equity
68...
asked 24 minutes ago -
Cost of Units Completed and in Process
The charges to Work in Process—Assembly Department for a...
asked 32 minutes ago -
inancial Statements
A list of accounts for Maple Inc. at December 31, 2017,
follows:
Accounts Receivable...
asked 49 minutes ago -
I have homework i was answered it .. but i need you to complete
my answer...
asked 50 minutes ago -
Sam sells industrial equipment. He converts one in four
customers he cold calls seeking an appointment....
asked 51 minutes ago -
Power Manufacturing has equipment that it purchased 7 years ago
for $2,750,000. The equipment was used...
asked 54 minutes ago -
A 33 kHz sound wave travels in air at v=355 m/s; what is the
temperature of...
asked 1 hour ago -
Natalia and her sister, Gina, have the following utility
functions on the number of slices of...
asked 1 hour ago