The figure below shows the stress condition at a point. a) Draw a Mohr circle for...
Problem 2 (8pts) Sketch Mohr circle for the shown element. Use Mohr Circle to determine the normal stresses on and Ot and the shear stress Tnt at this point if they act on the rotated stress element shown. Verify your results (on, i, Tnt) using stress transformation eqns. 1,100 psi 1,750 psi 20° 2,900 psi Illustrate the following on Mohr circle: center of Mohr Circle, reference point A, principle stresses, max in-plane shear stress, orientation of principal stresses Opi and...
23 Mohrs circle The state of plane stress at a point is represented by the element shown in Fig. 2.2. Determine maximum shear stresses and the orientation, draw the stress element with the proper orientation. Determine principal stresses and the orientation, draw the stress element with the proper orientation (Note: this question is required to be solved using Mohrs circle.) Mohrs circle The state of plane stress at a point is represented by the element shown in Fig. 2.2. Determine...
Given the stress element below: 1. Draw Mohr Circle for the stress element shown below. Use proper scale and draw neatly. 2. Show and label the principal and max shear stress on the circle. 3. On the Mohr circle indicate the angles form the X-axis of Mohr circle to the o axis and Tmax axis. 4. Draw stress elements for initial, principal, maximum shear in their proper orientation. Mark all points on Mohr Circle and corresponding points on stress elements...
Problem 6: Given the stress element below: 1. Draw Mohr Circle for the stress element shown below. Use proper scale and draw neatly. 2. Show and label the principal and max shear stress on the circle. 3. On the Mohr circle indicate the angles form the X-axis of Mohr circle to the oi axis and Tmax axis. 4. Draw stress elements for initial, principal, maximum shear in their proper orientation. Mark all points on Mohr Circle and corresponding points on...
Problem 6: Given the stress element below: 1. Draw Mohr Circle for the stress element shown below. Use proper scale and draw neatly. 2. Show and label the principal and max shear stress on the circle. 3. On the Mohr circle indicate the angles form the X-axis of Mohr circle to the oi axis and Tmax axis. 4. Draw stress elements for initial, principal, maximum shear in their proper orientation. Mark all points on Mohr Circle and corresponding points on...
Q4. (a) Plot a Mohr circle for the plane stress element which has been rotated 40 degrees in the anti-clockwise direction as shown in Figure Q4(a). (8 marks) (b) By using Mohr Circle, determine and sketch; all the stresses (Ox, O, and tyy) of the same element in the orientation as shown in Figure Q4(b). (4 marks) (i) the principal stress and its orientation. (4 marks) (i) the maximum shear stress, the corresponding normal stress, and its orientation. (4 marks)...
Mohr's Circle: For the state of stress shown below, sketch the plane stress Mohr Circle on a graphing paper (to scale and using drawing instruments). Staple it to this coversheet. 10 ksi 20 ksi In the space below sketch the element showing the principal planes and the principal stresses (remember to show the angle the element makes with either the X or the Y axis) In the space below sketch the element showing the maximum in-plane shearing stresses, associated normal...
DO QUESTION TWO ( 2 ) all parts following table. Specimen Effective NormalShear Stress at Failure Stress (psf(psf) 500 1000 2000 385 750 1510 1. Interpretation of direct shear test results (7 pts) Plot the three data points (A, B, and C) and determine the effective stress friction angle, If you decide to perform another test with an effective normal stress of 1500 psf, what do you predict the shear stress at failure will be? a. for the soil. b....
1. Refer to Figure 1. For the following element draw the Mohr's circle and: a. Locate the pole b. Show and label the tmax plane c. Show and label the major principal plane d. Show and label the minor principal plane e. Determine the horizontal plane stresses f. Determine the vertical plane stresses 100 kPa 30° Figure 1: An element undergoing a stress is shown 1. Refer to Figure 1. For the following element draw the Mohr's circle and: a....
40 M 45 MP 50 MPA - For the given state of stress, Part A: determine analytically (using stress transformation equations): 1) the principal planes. 2) the principal stresses. 3) Sketch the stress element for the above condition 4) the orientation of the planes of maximum in-plane shearing stress, 5) the maximum in-plane shearing stress and the corresponding normal stress. 6) Sketch the stress element for the above condition Part B: Only use Mohr's circle to determine 1) the principal...