Homework Answers
Add Answer to:
A cylindrical specimen of cold-worked copper has a ductility (P%EL) of I15 % If its cold-worked...
4. (10pts) A cylindrical specimen of cold-worked copper has a ductility (%EL) of 15%. If its...
4. (10pts) A cylindrical specimen of cold-worked copper has a ductility (%EL) of 15%. If its cold-worked radius is 6.4 mm, what was its radius before deformation? (The graphs on the last page might be useful)
A cylindrical specimen of a cold-worked brass has a ductility (%EL) of 33%. If its cold-worked...
A cylindrical specimen of a cold-worked brass has a ductility
(%EL) of 33%. If its cold-worked radius is 11 mm, what was its
radius before deformation? You may need to use Animated Figure
7.19c.
Percent cold work = 0 Ductility = 0 Ductility (%EL) Brass 1040 Steel Copper 10 60 70 20 30 40 50 Percent cold work
Summer 2 Name: Question 3: (10 points) A cylindrical specimen of cold-worked copper has ductility (%EL)...
Summer 2 Name: Question 3: (10 points) A cylindrical specimen of cold-worked copper has ductility (%EL) of 30%. (a) If its cold worked radius is 6.4 mm, what was its radius before deformation? (b)What are its tensile and yield strengths? 140 120 800 900 1040 Steel 1040 S 700 800 100 120 600 a700 80 100 E 500 600 400 Br Brass 500 300 Capper 40 400 200 Capper 300 20 100 200 10 20 30 40 50 70 10...
Question 4: A cylindrical specimen of cold-worked copper has a ductility (%EL) of 25% What is its tensile strength? (a...
Question 4: A cylindrical specimen of cold-worked copper has a ductility (%EL) of 25% What is its tensile strength? (a) (b) If its cold-worked radius is 10 mm, what was its radius before deformation? 70 140 120 900 800 1040 Steel 60 120 1040 Stee 800 700 100 50 700 600 100 80 40 600 500 Brass Brass 80 30 60 400 500 Brass 20 Copper 40 300 60 400 Copper 10 1040 Stee 200 300 40 20 Copper 100...
A cylindrical rod of copper having an initial diameter of 16 mm is to be cold worked by drawing such that the cross-sectional area is reduced. It is required to have a cold-worked yield stress of at...
A cylindrical rod of copper having an initial diameter of 16 mm is to be cold worked by drawing such that the cross-sectional area is reduced. It is required to have a cold-worked yield stress of at least 200 MPa and a ductility in excess of 12%; in addition, the final diameter of 11.3 mm is required. Describe the manner in which this procedure may carried out by answering: (10p) Write the yield strength and ductility before cold work. (15p)...
A cylindrical rod of 1040 steel having originally 11.4 mm in diameter is cold-worked by drawing...
A cylindrical rod of 1040 steel having originally 11.4 mm in diameter is cold-worked by drawing (i.e. pulling through a die with a hole smaller than the original rod cross section). The circular cross section will be maintained during deformation. The deformed steel is desired to have tensile strength in excess of 825 MPa and ductility of at least 12% EL. The final diameter must be 8.9 mm. Explain how this may be accomplished.
Dura Total: 75 points initial diameter of 25.1 mm is to be cold worked by drawing...
Dura Total: 75 points initial diameter of 25.1 mm is to be cold worked by drawing in order to reduce the (Crigh cctional area such that the final diameter is 22.5mm. Figures 7.19a left) and 7.1e In. Deformation -cold working: A non-cold-worked 1040 steel cylindrical bu 7.19c (right) from the text are provided. 040 60 10 1040 ste Coopar Percent cold work a. Determine the ductility (%EL) and yield strength of the steel rodaner a single drawing process reducing the...
rn A specimen of copper having a rectangular cross section 15.2 mm x 19.1 mm is...
rn A specimen of copper having a rectangular cross section 15.2 mm x 19.1 mm is pulled in tension with 44,500 N force, producing only elastic deformation. Calculate the resulting strain. Round off the answer to three significant figures. Answer: 1.394e-3 A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa and an original diameter of 10.2 mm experiences only elastic deformation when a tensile load of 8900 N is applied. Compute the maximum length of...
4. (a) What is cold work and its significance in material properties. (b) Briefly explain why...
4. (a) What is cold work and its significance in material properties. (b) Briefly explain why cold-worked metals are more susceptible to corrosion than noncold-worked metals. (c) A cylindrical rod of 1040 steel originally 15.2 mm in diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. A cold-worked tensile strength in excess of 840 MPa was applied. Determine the percent cold work if the final diameter must be 10 mm. [20 pts]
this all of it !!! 4. Two previously undeformed specimens of the same metal are to...
this all of it !!!
4. Two previously undeformed specimens of the same metal are to be plastically deformed by reducing their cross-sectional areas. One has a circular cross section, and the other is rectangular during deformation the circular cross section is to remain circular, and the rectangular is to remain as such. Their original and deformed dimensions are as follows: Rectangular (mm) Circular (diameter, mm) 125x 175 15.2 Original dimensions 7.5x 200 Deformed dimensions 11.4 Which of these specimens...
4. (10pts) A cylindrical specimen of cold-worked copper has a ductility (%EL) of 15%. If its cold-worked radius is 6.4 mm, what was its radius before deformation? (The graphs on the last page might be useful)
A cylindrical specimen of a cold-worked brass has a ductility
(%EL) of 33%. If its cold-worked radius is 11 mm, what was its
radius before deformation? You may need to use Animated Figure
7.19c.
Percent cold work = 0 Ductility = 0 Ductility (%EL) Brass 1040 Steel Copper 10 60 70 20 30 40 50 Percent cold work
Summer 2 Name: Question 3: (10 points) A cylindrical specimen of cold-worked copper has ductility (%EL) of 30%. (a) If its cold worked radius is 6.4 mm, what was its radius before deformation? (b)What are its tensile and yield strengths? 140 120 800 900 1040 Steel 1040 S 700 800 100 120 600 a700 80 100 E 500 600 400 Br Brass 500 300 Capper 40 400 200 Capper 300 20 100 200 10 20 30 40 50 70 10...
Question 4: A cylindrical specimen of cold-worked copper has a ductility (%EL) of 25% What is its tensile strength? (a) (b) If its cold-worked radius is 10 mm, what was its radius before deformation? 70 140 120 900 800 1040 Steel 60 120 1040 Stee 800 700 100 50 700 600 100 80 40 600 500 Brass Brass 80 30 60 400 500 Brass 20 Copper 40 300 60 400 Copper 10 1040 Stee 200 300 40 20 Copper 100...
Dura Total: 75 points initial diameter of 25.1 mm is to be cold worked by drawing in order to reduce the (Crigh cctional area such that the final diameter is 22.5mm. Figures 7.19a left) and 7.1e In. Deformation -cold working: A non-cold-worked 1040 steel cylindrical bu 7.19c (right) from the text are provided. 040 60 10 1040 ste Coopar Percent cold work a. Determine the ductility (%EL) and yield strength of the steel rodaner a single drawing process reducing the...
rn A specimen of copper having a rectangular cross section 15.2 mm x 19.1 mm is pulled in tension with 44,500 N force, producing only elastic deformation. Calculate the resulting strain. Round off the answer to three significant figures. Answer: 1.394e-3 A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa and an original diameter of 10.2 mm experiences only elastic deformation when a tensile load of 8900 N is applied. Compute the maximum length of...
4. (a) What is cold work and its significance in material properties. (b) Briefly explain why cold-worked metals are more susceptible to corrosion than noncold-worked metals. (c) A cylindrical rod of 1040 steel originally 15.2 mm in diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. A cold-worked tensile strength in excess of 840 MPa was applied. Determine the percent cold work if the final diameter must be 10 mm. [20 pts]
this all of it !!!
4. Two previously undeformed specimens of the same metal are to be plastically deformed by reducing their cross-sectional areas. One has a circular cross section, and the other is rectangular during deformation the circular cross section is to remain circular, and the rectangular is to remain as such. Their original and deformed dimensions are as follows: Rectangular (mm) Circular (diameter, mm) 125x 175 15.2 Original dimensions 7.5x 200 Deformed dimensions 11.4 Which of these specimens...
Most questions answered within 3 hours.
-
1- What is the freezing point of pure water (in degrees
Celsius)?
2-
he molar mass...
asked 2 minutes ago -
Determine the direction of the force that will act on the charge
in each of the...
asked 8 minutes ago -
You purchase your daily coffee at the Chemist’s Coffeehouse and
have a choice of two cups:...
asked 2 hours ago -
Which of the following pairs of chemicals could be used to make
a buffer solution?
A.)...
asked 2 hours ago -
Problem 16-51 Sales
Activity Variance (LO 16-3)Odessa, Inc., reports the following
information concerning operations for the...
asked 3 hours ago -
Pictured on the right are thee point charges Q1 = 18.4 μC, Q2 =
-30.6 μC,...
asked 3 hours ago -
A graduate student is conducting research in psychology and
needs to obtain the IQ scores of...
asked 3 hours ago -
R2.84: There are 2 defective products in a production lot of 10.
An inspector randomly selected...
asked 5 hours ago -
Consider the following equilibrium system: COCl2(g) CO(g) +
Cl2(g) A 10.00 L evacuated flask is filled...
asked 5 hours ago -
1) What are the two distinct steps that one needs to perform
when developing a data...
asked 5 hours ago -
2) Write a C++ program that uses a class called “Degree” to
obtain the trigonometric
values...
asked 6 hours ago -
1. In eukaryotic cells the genomes of
&
asked 6 hours ago