Construct the shear and bending moment diagrams and the qualitative deflected shape for each of the...

Question

Question

Construct the shear and bending moment diagrams and the qualitative deflected shape for each of the beams shown.

5.45) 20 kips 2 kips/ft Hing 10 10 30

Answer 1

Answer #1

vipslbt A. MD Lo 2.5 니ps SFD 36.2r kips-1 (OR) oR) 2.0.83 kps-b t, RD = 22.rlej p Yron Shear yore, Sr= 2.5 6 Poattrontーマで«o Shear 6 x30 -t 12.

Answer 2

Similar Homework Help Questions

Draw the shear and bending moment diagrams and the qualitative deflected shape for the beam shown in Fig. 5.10(a)

Draw the shear and bending moment diagrams and the qualitative deflected shape for the beam shown in Fig. 5.10(a)
8. Determine and Draw the quantitative shear, bending moment diagrams and qualitative deflected curve for the...

8. Determine and Draw the quantitative shear, bending moment diagrams and qualitative deflected curve for the following questions by using the force method 86 k FM B C А ID ΟΙΟ. 4 ft 4 ft 8ft
Draw the Shear & Moment Diagrams and sketch the deflected shape for the beams shown below...

Draw the Shear & Moment Diagrams and sketch the deflected shape for the beams shown below (Indicate values at points of change and minimums and maximums. Also indicate units near values or on each drawing axis) Scan or photograph when completed. Submit on Moodle as a .pdf or .jpg 10k w = 200 lb/ft 2k W = 800 lb/ft 10 ft 5 ft 5ft > 10 ft ** 5+ > 5 > M M D D

7. Determine and Draw the quantitative shear, bending moment diagrams and qualitative deflected curve for the...

7. Determine and Draw the quantitative shear, bending moment diagrams and qualitative deflected curve for the following questions by using the force method 86N FM 86 N/m A C B 2 m 2 m
1-(25%) Draw shear and moment diagrams for the beam shown in Figure P-1 . Draw a sketch of the deflected shape. The spans are 30-ft long each (total of 90-ft), the concentrated loads are eac...

1-(25%) Draw shear and moment diagrams for the beam shown in Figure P-1 . Draw a sketch of the deflected shape. The spans are 30-ft long each (total of 90-ft), the concentrated loads are each 120 kips, and placed at the center of left span and the free end. El is constant. Left support is a pin and the other two are roller supports. 120 kips 120 kips Figure P-1 1-(25%) Draw shear and moment diagrams for the beam shown...
9. Determine and Draw the quantitative shear, bending moment diagrams and qualitative deflected curve for the...

9. Determine and Draw the quantitative shear, bending moment diagrams and qualitative deflected curve for the following questions by using the force method B С 86 kN/m 5 m 3 m A OOO FM

QUESTION 4 4. Bending Moment in a Beam Draw the shear and bending moment diagrams for...

QUESTION 4 4. Bending Moment in a Beam Draw the shear and bending moment diagrams for the beam and loading shown. Then use the bending moment diagram to determine the bending moment in ſkip-ft] experienced by the beam at point D. 12 kips 12 kips 10 kips the С - 5 ft 5ft --- 2 ft 3 ft
Use the graphical method to construct the shear-force and bending moment diagrams for the beam shown....

Use the graphical method to construct the shear-force and bending moment diagrams for the beam shown. Label all significant points and identify the maximum moments along with their respective locations. 12 ft 10 ft 8 ft FIGURE P7.23 50 kips 560 kip ft 20 kips/ft eC Al 6ft 10 ft 6 ft 12 ft 6 ft FIGURE P7.24 A20 kN 50 kN 50 kN/m
Use the graphical method to construct the shear-force and bending moment diagrams for the beam shown....

Use the graphical method to construct the shear-force and bending moment diagrams for the beam shown. Let a=4.0 ft, b=5.0 ft, c=5.0 ft,d=3.0 ft. w = 7.5 kips/ft and P = 30 kips. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. с D E b For this loading, calculate the reaction forces A, and E, acting on the beam. Positive values for the reactions...

Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let...

Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=4.0 ft, b=5.0 ft, c=5.0 ft, d=3.0 ft, w = 11.5 kips/ft and P = 63 kips. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. W X B D E a b d For this loading, calculate the reaction forces Ay and Ey acting on the beam. Positive...