Homework Answers
f. 192.168.1.1
In the above diagram this default gateway address should be assigned to Host A.
In the above network switch A ip address is 192.168.1.66/26 in that network for switch A connected all 26 pc's having the same default gateway that is 192.168.1.1
Add Answer to:
Refer to the exhibit. Which default gateway address should be assigned to HostA? ISP SO/1: 10.1.1.2...
Using the following output, which of the routes is the default gateway? A. 192.168.3.0/24 [1/0] via...
Using the following output, which of the routes is the default
gateway?
A. 192.168.3.0/24 [1/0] via 192.168.1.1
B. 192.168.1.0/24 is directly connected,
FastEthernet0/0
C. 192.168.5.0/24 is directly connected,
FastEthernet0/1
D. 192.168.10.0/24 [90/284160] via 192.168.1.1,
00:04:19, FastEthernet0/0
E. None of the above
Router1#show ip route Codes: C connected, S- static, R RIP, M - mobile, B BGP D EIGRP, EX EIGRP external, O OSPF, IA OSPF inter area N1 - OSPF NSSA external type 1, N2 -OSPF NSSA external type 2...
Refer to the network figure above, showing two Ethernet Subnets connected through an IP Router, for questions #1, #2 and #3. For each device, both its Internet Protocol (IP) address and its MAC addre...
Refer to the network figure above, showing two Ethernet Subnets
connected through an IP Router, for questions #1, #2 and #3. For
each device, both its Internet Protocol (IP) address and its MAC
address (also called the Physical address or the Ethernet address)
are shown. The Subnet Mask used by all devices is 255.255.255.192
(which is same as prefix length “/26”).
(5 points) Assuming that Client #1 sent a packet to Client #3
and then Client #3 sent a packet...
Assume that the Web Server transmits a packet to Client #2. What are the specific numeric address...
Assume that the Web Server transmits a packet to Client #2. What
are the specific numeric address values (from the diagram above)
that will be in each of the following header fields of this packet
sent by Web Server?
a) (3 points) Source Address in Ethernet header
b) (3 points) Destination Address in Ethernet header (assume
that Web Server ARP Table already contains any MAC address needed
for this packet)
c) (3 points) Source Address in IP header
d) (3...
using the information given below . what is the ip address , subnet mask , default...
using the information given below
. what is the ip address , subnet mask , default gateway?
** corrections
# of bits in subnet for A
:6
# of bits in submet for B:
3
PC-A
R1 G0/0
R GO/1
S1
PC-B ?
assign the IP ADDRESS information with given information
Given, IP address: 202.44.66.0/24 For Subnet A: It needs 2 valid hosts 2 valid hosts + 2 (network and broadcast) = 22 i.e., It needs 2 bit as host...
Refer to the exhibit. Which of the following IP addresses will be chosen as EIGRP Router-ID?...
Refer to the exhibit. Which of the following IP addresses will be chosen as EIGRP Router-ID? RT ship interface brier Interface IP-Address GigabitEthernet0/0 10.10.0.2 GigabitEthernet0/1 192.168.15.2 Loopbacko 1.1.1.1 Loopbacki 172.17.10.1 vlani unassigned OK? Method Status Protocol YES manual up up YES manual up up YES manual up up YES manual up up YES unset administratively down down router ospf 1 log-adjacency-changes network 192.168.1.0 0.0.0.255 area 0 network 172.16.0.0 0.0.255.255 area 0 O 10.10.0.2 O 172.17.10.1 O 1.1.1.1 O 192.168.15.2
Addressing Table IPv4 Address Subnet Mask Device Interface Default Gateway IPv6 Address/Prefix IP...
Addressing Table IPv4 Address Subnet Mask Device Interface Default Gateway IPv6 Address/Prefix IPv6 Link-local N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A G0/O 2001 DB8:ACAD:: 1/64 FE80::1 G0/1 2001:DB8:ACAD:1:1/64FE80::1 R1 G0/2 2001:DB8:ACAD:21/64FE80::1 172.16.1.2 2001:DB8:2::1/64 209.165.200.226 2001:DB8:1::1164 172.16.1.1 2001:DB8:2:2/64 255.255.255.252 FE80::1 255.255.255.252 FE80::2 255.255.255.252 FE80:2 S0/0/1 S0/0/0 Central S0/0/1 S1 S2 S3 VLAN 1 VLAN 1 VLAN 1 Staff NIC 2001:DB8:ACAD::2/64FE80::2 FE80::1 Sales 2001 DB8:ACAD:1:2/64FE80::2 FE80::1 IT 2001 DB8:ACAD:2: 2/64 FE80::2 64.100.0.3 2001 DB8 CAFE::3/64 192.168.0.196 2001:DB8...
A/ Given the following IP address from the Class B address range using the default subnet...
A/ Given the following IP address from the Class B address range using the default subnet mask: 100.110.0.0. Your network plan requires no more than 64 hosts on a subnet. When you configure the IP address in Cisco IOS software, which value should you use as the subnet mask? 255.255.0.0 255.255.128.0 255.255.255.128 255.255.255.252 B/ Identify how many valid host addresses can you have on 192.168.27.32 network with a subnet mask of 255.255.255.240. (2^4) - 2 (2^3) – 2 (2^2)...
Refer to the exhibit. The output of 'show interface g0/0' command on Router-1 can be used...
Refer to the exhibit. The output of 'show interface g0/0' command on Router-1 can be used to troubleshoot EIGRP adjacency problem. 30/0 80/1 Router 1 Router 2 OK? Method Status Rlish ip interface brief Interface IP-Address Protocol GigabitEthernet0/0 10.10.0.2 GigabitEthernet0/1 unassigned down vlani unassigned down YES manual up up YES unset administratively down YES unset administratively down O True O False Why does OSPF uses Designated Router(DR)? (choose two? Reduce the number of adjacencies over a multiaccess network To summaries...
COMPUTER NETWORKS: 1. An organization with a Class B IP address of 128.25.0.0/16 wants eight subnets...
COMPUTER NETWORKS: 1. An organization with a Class B IP address of 128.25.0.0/16 wants eight subnets in its network. There are some legacy routers. Hence, they do not want to use zero and all-ones subnets. a. How many bits are used in each of the following three fields? netID: ______________ subnetID: __________ hostID: _________________ b. Determine the subnet mask that needs to be set in the hosts in dotted decimal notation. Subnet Mask in dotted decimal notation: ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬_______________________________________ c. ...
Which of the following is the purpose of a subnet mask in a network? (Select all...
Which of the following is the purpose of a subnet mask in a network? (Select all that apply) a. A subnet mask is not necessary when a default gateway is specified. b. A subnet mask is used to differentiate between the network address, the host addresses, and the broadcast address. c. A subnet mask is required only when bits are borrowed on a network. d. A subnet mask is used to determine in which subnet an IP address belongs. e....
Using the following output, which of the routes is the default
gateway?
A. 192.168.3.0/24 [1/0] via 192.168.1.1
B. 192.168.1.0/24 is directly connected,
FastEthernet0/0
C. 192.168.5.0/24 is directly connected,
FastEthernet0/1
D. 192.168.10.0/24 [90/284160] via 192.168.1.1,
00:04:19, FastEthernet0/0
E. None of the above
Router1#show ip route Codes: C connected, S- static, R RIP, M - mobile, B BGP D EIGRP, EX EIGRP external, O OSPF, IA OSPF inter area N1 - OSPF NSSA external type 1, N2 -OSPF NSSA external type 2...
Refer to the network figure above, showing two Ethernet Subnets
connected through an IP Router, for questions #1, #2 and #3. For
each device, both its Internet Protocol (IP) address and its MAC
address (also called the Physical address or the Ethernet address)
are shown. The Subnet Mask used by all devices is 255.255.255.192
(which is same as prefix length “/26”).
(5 points) Assuming that Client #1 sent a packet to Client #3
and then Client #3 sent a packet...
Assume that the Web Server transmits a packet to Client #2. What
are the specific numeric address values (from the diagram above)
that will be in each of the following header fields of this packet
sent by Web Server?
a) (3 points) Source Address in Ethernet header
b) (3 points) Destination Address in Ethernet header (assume
that Web Server ARP Table already contains any MAC address needed
for this packet)
c) (3 points) Source Address in IP header
d) (3...
using the information given below
. what is the ip address , subnet mask , default gateway?
** corrections
# of bits in subnet for A
:6
# of bits in submet for B:
3
PC-A
R1 G0/0
R GO/1
S1
PC-B ?
assign the IP ADDRESS information with given information
Given, IP address: 202.44.66.0/24 For Subnet A: It needs 2 valid hosts 2 valid hosts + 2 (network and broadcast) = 22 i.e., It needs 2 bit as host...
Refer to the exhibit. Which of the following IP addresses will be chosen as EIGRP Router-ID? RT ship interface brier Interface IP-Address GigabitEthernet0/0 10.10.0.2 GigabitEthernet0/1 192.168.15.2 Loopbacko 1.1.1.1 Loopbacki 172.17.10.1 vlani unassigned OK? Method Status Protocol YES manual up up YES manual up up YES manual up up YES manual up up YES unset administratively down down router ospf 1 log-adjacency-changes network 192.168.1.0 0.0.0.255 area 0 network 172.16.0.0 0.0.255.255 area 0 O 10.10.0.2 O 172.17.10.1 O 1.1.1.1 O 192.168.15.2
Addressing Table IPv4 Address Subnet Mask Device Interface Default Gateway IPv6 Address/Prefix IPv6 Link-local N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A G0/O 2001 DB8:ACAD:: 1/64 FE80::1 G0/1 2001:DB8:ACAD:1:1/64FE80::1 R1 G0/2 2001:DB8:ACAD:21/64FE80::1 172.16.1.2 2001:DB8:2::1/64 209.165.200.226 2001:DB8:1::1164 172.16.1.1 2001:DB8:2:2/64 255.255.255.252 FE80::1 255.255.255.252 FE80::2 255.255.255.252 FE80:2 S0/0/1 S0/0/0 Central S0/0/1 S1 S2 S3 VLAN 1 VLAN 1 VLAN 1 Staff NIC 2001:DB8:ACAD::2/64FE80::2 FE80::1 Sales 2001 DB8:ACAD:1:2/64FE80::2 FE80::1 IT 2001 DB8:ACAD:2: 2/64 FE80::2 64.100.0.3 2001 DB8 CAFE::3/64 192.168.0.196 2001:DB8...
Refer to the exhibit. The output of 'show interface g0/0' command on Router-1 can be used to troubleshoot EIGRP adjacency problem. 30/0 80/1 Router 1 Router 2 OK? Method Status Rlish ip interface brief Interface IP-Address Protocol GigabitEthernet0/0 10.10.0.2 GigabitEthernet0/1 unassigned down vlani unassigned down YES manual up up YES unset administratively down YES unset administratively down O True O False Why does OSPF uses Designated Router(DR)? (choose two? Reduce the number of adjacencies over a multiaccess network To summaries...
Most questions answered within 3 hours.
-
Suppose that on a temperature scale X, water boils at 203.0°X
and freezes at -105.7°X. What...
asked 7 minutes ago -
BaS crystallizes in a cubic unit cell with S2- ions on each
corner and each face....
asked 38 minutes ago -
A. 0≤P(Oi)≤10≤P(Oi)≤1 for each i
B. P(Oi)≤0P(Oi)≤0
C. P(Oi)=1+P(OCi)P(Oi)=1+P(OiC)
D. P(Oi)≥1P(Oi)≥1
If an experiment consists of...
asked 2 hours ago -
A battery has an emf of 9.20V and an internal resistance of 1.20
ohm. a)What resistance...
asked 2 hours ago -
The area of an elastic circular loop decreases at a constant
rate, dA/dt = −6.60×10−3 m2/s...
asked 3 hours ago -
The denaturation of proteins can be described by the
equilibrium
F⇌U
where F and U represent...
asked 4 hours ago -
Please answer what the maximum and minimum force is, and the
angle on the ion is...
asked 4 hours ago -
implement a program that reads a number of rows and a symbol.
The program will draw...
asked 4 hours ago -
Assume that when adults with smartphones are randomly selected,
45% use them in meetings or classes....
asked 4 hours ago -
Determine the number of formula units of
Na2SO4 and moles of oxygen contained in 8.11
moles...
asked 5 hours ago -
Explain in steps on the following code
What would be the output when executed
using System;...
asked 5 hours ago -
Given the information in the table, which of the following
statements is CORRECT?
Stock A
Stock...
asked 5 hours ago