If you have any doubt please ask me...please upvote to me...Ta
Review The tank is filled with water at a temperature of 20°C. (Figure 1) Part A...
Water at 20 C flows through the 20-mm diameter galvanized iron pipe such that it discharges at C from the fully opened gate valve B at 0.003 m/s Pe 998 3 kg/m3 and 100(10 ) m2/s Use the Part A Determine the required pressure at A Include the minor losses of the four elbows and gate valve. Express your answer to three significant figures and include the appropriate units. equation市一1.8kg(#)1.11 + 3.7 Figure 1 of 1 PA: I Value Units...
2. Water flows at a rate of 60 L/s from a main reservoir to a subsidiary through a 600 m long, 185 mm diameter asphalted cast iron pipe as shown in the figure. The pipeline contains a gate valve, a globe valve and 4 standard 90° elbows. The entrance and exit are square edged, and all fittings are screwed ends, determine, You need Kinematic viscosity of water, 1 x 10-6 m/s2 (a) The friction head loss in the pipe, (b)...
Notre Dame University Faculty of Engineering Mechanical Engineering Dep Water flows through cast iron pipes and between the two tanks shown in Figure P4. The free sharp edge entrance. Bd by a distance of 8 m. The water leaves Tank 1 through a contains a regular 90 threaded elbow and two unknown a regular 90° threaded elbow and a fully Branch pipeline 1 contains a regular 90 valves (valve 1 and valve 2). Branch pipeline 2 contains open gate valve....
Notre Dame University Faculty of Engineering Mechanical Engineering Dep Water flows through cast iron pipes and between the two tanks shown in Figure P4. The free sharp edge entrance. Bd by a distance of 8 m. The water leaves Tank 1 through a contains a regular 90 threaded elbow and two unknown a regular 90° threaded elbow and a fully Branch pipeline 1 contains a regular 90 valves (valve 1 and valve 2). Branch pipeline 2 contains open gate valve....
Notre Dame University Faculty of Engineering Mechanical Engineering Dep Water flows through cast iron pipes and between the two tanks shown in Figure P4. The free sharp edge entrance. Bd by a distance of 8 m. The water leaves Tank 1 through a contains a regular 90 threaded elbow and two unknown a regular 90° threaded elbow and a fully Branch pipeline 1 contains a regular 90 valves (valve 1 and valve 2). Branch pipeline 2 contains open gate valve....
Problem 4 The pumping system shown in the figure below to deliver 3 cfs of 60°F water. The total elevation difference between is 84 ft. The suction line is a 6-inch diameter, 300-ft long cast-iron pipe. The discharge line is 6-inch diameter in an 860-ft long plastic pipe. The suction inlet for the pump is 20 ft above the reservoir. The atmospheric pressure is 14.70 psia. The required NPSH is 7.0 ft. Minor losses include entrance: k, = 0.5, open...
PartA The pipe system shown in (Figure 1) consists of a 3-in.-diameter, 100-ft-long galvanized iron pipe, a fully opened gate valve, four elbows, a flush entrance, and a pump with the pump head curve shown in (Figure 2). The friction factor is 0.022 Estimate the flow Express your answer using two significant figures gal/min Submit Previous Answers Request Answer X Incorrect; Try Again; 4 attempts remaining ▼ Part B Estimate the corresponding pump head generated by the pump Express your...
Poblems 1. At a water treatment plant, water (68°F) flowe from tank A to tank B at a rate of 0.30 through a 3-in.-diameter, cast-iron pipe that is 200 feet long. Determine the difference in water surface elevation between tanks (open to the atmosphere) if there are two bends i = 2.0) and a fully open gate valve in the pipeline.
A water tank filled with solar-heated water at 40°C is to be used for showers in a field using gravity-driven flow. The system includes 39 m of 1.5-cm-diameter galvanized iron piping with four miter bends (90°) without vanes and a wide-open globe valve. If water is to flow at a rate of 1.2 L/S through the shower head, determine how high the water level in the tank must be from the exit level of the shower. Disregard the losses at...
Please solve a,b,c,d,e,f 1) A water fountain is to be installed at a remote location by attaching a cast iron pipe directly to a water main through which water is flowing. The entrance to the pipe is sharp-edged 15m (K-0.5), and the 15m long piping system involves three 90 bends without vanes (K1.1), a fully open gate valve (K.-0.2), and a fully open angle valve (K-5). If the diameter of the pipe is 2 em and the system is to...