Original Temp = 22 degrees
CHomework Answers
Add Answer to:
Original Temp = 22 degrees
C
3. An aluminum ring has an inner diameter slightly smaller...
At 20∘C, the hole in an aluminum ring is 2.700 cm in diameter. You need to...
At 20∘C, the hole in an aluminum ring is 2.700 cm in diameter. You need to slip this ring over a steel shaft that has a room-temperature diameter of 2.707 cm . To what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? Coefficients of linear thermal expansion of steel and aluminum are 12×10−6 K−1 and 23×10−6 K−1 respectively.
At 20∘C, the hole in an aluminum ring is 2.300 cm in diameter. You need to...
At 20∘C, the hole in an aluminum ring is 2.300 cm in diameter. You need to slip this ring over a steel shaft that has a room-temperature diameter of 2.306 cm .To what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? Coefficients of linear thermal expansion of steel and aluminum are 12×10−6 K−1 and 23×10−6 K−1 respectively.
At 28.5°C, an aluminum ring has an inner diameter of 6.000 0 cm and a brass...
At 28.5°C, an aluminum ring has an inner diameter of 6.000 0 cm and a brass rod has a diameter of 6.070 0 cm. (Note, if needed, Table 1 is available for use in solving this problem.) (a) If only the ring is warmed, what temperature must it reach so that it will just slip over the rod? 486.11 This is the required temperature change of the ring. The problem asks for the final temperature. °C (b) If both the...
A brass ring of diameter 10.00 cm at 22.0°C is heated and slipped over an aluminum...
A brass ring of diameter 10.00 cm at 22.0°C is heated and slipped over an aluminum rod of diameter 10.01 cm at 22.0°C. Assume the average coefficients of linear expansion are constant. (a) To what temperature must the combination be cooled to separate the two metals? -177 °C Is that temperature attainable? Yes (b) What if the aluminum rod were 10.02 cm in diameter? -173.31 Your response differs from the correct answer by more than 10%. Double check your calculations....
OAsk Your Teacher 2. +1/3 polnts | Previous Answers SF6 10.P.015 My Notes A brass ring of diameter 10 cm at 18.0°C is heated and slipped over an aluminum rod with a diameter of 10.01 cm at 18.0°C. As...
OAsk Your Teacher 2. +1/3 polnts | Previous Answers SF6 10.P.015 My Notes A brass ring of diameter 10 cm at 18.0°C is heated and slipped over an aluminum rod with a diameter of 10.01 cm at 18.0°C. Assume that the average coefficients of linear expansion are constant (a) To what temperature must this combination be cooled to separate them? PC Is this temperature attainable? yes no (b) If the aluminum rod were 10.03 cm in diameter, what would be...
short answer 2. and 3. 142 cm 2. Calculate the diameter of a half circle having...
short answer 2. and 3.
142 cm 2. Calculate the diameter of a half circle having an area of 2.2 ft. (in.) 3. A bearing race is installed on a steel shaft having a slightly larger diameter. The race is heated, causing it to expand, then it is slid onto the shaft and allowed to contract, forming an interference fit. Unfortunately, heating the bearing race can cause metallurgical damage, so an alternative procedure is to cool the shaft so it...
At 28.5°C, an aluminum ring has an inner diameter of 6.000 0 cm and a brass rod has a diameter of 6.070 0 cm. (Note, if needed, Table 1 is available for use in solving this problem.) (a) If only the ring is warmed, what temperature must it reach so that it will just slip over the rod? 486.11 This is the required temperature change of the ring. The problem asks for the final temperature. °C (b) If both the...
A brass ring of diameter 10.00 cm at 22.0°C is heated and slipped over an aluminum rod of diameter 10.01 cm at 22.0°C. Assume the average coefficients of linear expansion are constant. (a) To what temperature must the combination be cooled to separate the two metals? -177 °C Is that temperature attainable? Yes (b) What if the aluminum rod were 10.02 cm in diameter? -173.31 Your response differs from the correct answer by more than 10%. Double check your calculations....
OAsk Your Teacher 2. +1/3 polnts | Previous Answers SF6 10.P.015 My Notes A brass ring of diameter 10 cm at 18.0°C is heated and slipped over an aluminum rod with a diameter of 10.01 cm at 18.0°C. Assume that the average coefficients of linear expansion are constant (a) To what temperature must this combination be cooled to separate them? PC Is this temperature attainable? yes no (b) If the aluminum rod were 10.03 cm in diameter, what would be...
short answer 2. and 3.
142 cm 2. Calculate the diameter of a half circle having an area of 2.2 ft. (in.) 3. A bearing race is installed on a steel shaft having a slightly larger diameter. The race is heated, causing it to expand, then it is slid onto the shaft and allowed to contract, forming an interference fit. Unfortunately, heating the bearing race can cause metallurgical damage, so an alternative procedure is to cool the shaft so it...
Most questions answered within 3 hours.
-
Describe how the file manager allocates a file to a single user.
List the steps that...
asked 5 minutes ago -
For the following reaction:
IBr(g) + 4F2(g) → IF5(g) +
BrF3(g)
Compound
ΔH°f (kJ mol-1)...
asked 7 minutes ago -
Assuming the simple probability of even A is given as P(A) and
the simple probability of...
asked 10 minutes ago -
2.- It is known that 20% of the students on campus are smokers.
If 8 students...
asked 10 minutes ago -
Provide a summary/reflection of what you gleaned of how law
enforcement is effect by Unconventional Weapons...
asked 31 minutes ago -
From the following heats of combustion,
CH3OH(l) + 3/2O2(g) → CO2(g) +
2H2O(l)
ΔHorxn = –726.4...
asked 24 minutes ago -
Floating Point Representation
Consider a computer that stores information using 10 bits words.
The first bit...
asked 53 minutes ago -
. The theoretical weight percent of carbon in (CH3)3N is:
A. 20.32% B. 81.95% C. 9.97%...
asked 46 minutes ago -
The rate of a certain reaction is given by the following rate
law:
rate = k[H2][I2]...
asked 41 minutes ago -
A 10,000 uF capacitor is in series with a 1 uH inductor. What is
Zeq of...
asked 45 minutes ago -
Draw the molecular orbital diagram for O2-
(oxygen molecule with a negative charge).
asked 1 hour ago -
Of all the different weapons discussed in this chapter that make
up CBRNE,
Which group do...
asked 1 hour ago