5) A 1938 nickel has a diameter of 21.21 mm, a thickness of 1.95 mm, and...

Question

Question

Answer 1

Answer #1

Answer 2

Similar Homework Help Questions

How much nickel is contained in a nickel coin that is 8.33% (by weight) of nickel?...

How much nickel is contained in a nickel coin that is 8.33% (by weight) of nickel? Recall that a nickel coin has a density of 8.91 g/cm3, a diameter of 21.21 mm and a thickness of 1.95 mm. A. 73.7 grams B. 511. grams C. 0.00644 grams D. 2.04 grams E. 0.511 grams
A certain coin has a diameter of 12,3 mm, a thickness of 2,4 mm, and weighs...

A certain coin has a diameter of 12,3 mm, a thickness of 2,4 mm, and weighs 0,05458 N. What is its density (kg/dm3)? Answer in two decimal places.
A hydraulic press has one piston of diameter 2.0 cm and the other piston of diameter...

A hydraulic press has one piston of diameter 2.0 cm and the other piston of diameter 8.0 cm. What force must be applied to the smaller piston to obtain a force of 1600 N at the larger piston? 1) 6.25 N 2) 25 N 3) 100 N 4) 400 N 5) 1600 N Question 2 (1 point) A penny has a diameter of 19.55 mm, a thickness of 1.55 mm and a mass of 2.500 g. What is the density?...

Your answer is incorrect. Try again A hanging .nickel wire with diameter 0.5 mm (0.5 x...

Your answer is incorrect. Try again A hanging .nickel wire with diameter 0.5 mm (0.5 x 10-3 m) is initially 1.45 m long. when a 98 kg mass is hung from it, the wire stretches an amount 35.5 mm. A mole of"nickel has a mass of 59 grams, and its density is 8.90 g/cm3. Find the approximate value of the effective spring stiffness of the interatomic force ks =To:31777228 N/m the tolerance is +/-5%
Problem 4.31 A hanging 'nickel wire with diameter 1.4 mm (1.4 × 10-3 m) is initially...

Problem 4.31 A hanging 'nickel wire with diameter 1.4 mm (1.4 × 10-3 m) is initially 0.70 m long. When a 60 kg mass is hung from it, the wire stretches an amount 1.34 mm. A mole of 'nickel has a mass of 59 grams, and its density is 8.90 g/cm3. Find the approximate value of the effective spring stiffness of the interatomic force. ks= N/m
3.5 A compound thin cylinder has a common diameter of 100 mm and the inner cylinder has a thickness of 2,5 mm. The r...

3.5 A compound thin cylinder has a common diameter of 100 mm and the inner cylinder has a thickness of 2,5 mm. The radial pressure between the two cylinders is 200 kPa and the difference between the two common diameters before shrinkage was 4,305 x 10-3 mm. Determine the (a) thickness of the outer cylinder; (b) resultant hoop stresses in both cylinders if the compound cylinder is subjected to an internal pressure of 180 kPa (E 200 GPa). 2 mm]...

A cylindrical piece of steel has a diameter of 50 mm and a length of 200...

A cylindrical piece of steel has a diameter of 50 mm and a length of 200 mm. Steel has a density of 7200 kg/m3 a) (3 points) Determine the mass of this piece in kg. 1. b) (3 points) If a 10 mm diameter opening is drilled through the entire length of this cylinder and that portion removed, what is the new mass of this piece? c) (4 points) The 10 mm diameter piece is pulled with a force of...
A 50-mm-diameter steel tube with a wall thickness of 2 mm just fits in a rigid...

A 50-mm-diameter steel tube with a wall thickness of 2 mm just fits in a rigid hole. Find the tangential stress if an axial compressive load of 10 kN is applied. Assume υ = 0.30 and E = 200 X 10 N/m . Neglect the possibility of buckling.
A metal wire having a diameter of 1.1390 mm and a length of 514.1 mm is...

A metal wire having a diameter of 1.1390 mm and a length of 514.1 mm is deformed elastically in tension with a force of 1,660 N. Given that the elastic modulus and Poisson's ratio of the metal are 115 GPa and 0.3410, respectively, determine the change in diameter of the specimen (in mm). O-0.0257 mm -0.0492 mm -0.0055 mm -0.0107 mm Question 26 (1 point) Consider a natural gas pipeline. The pipeline is made of steel of thickness 2.00 cm....

5. a) On a plant floor, ethanol has spilt and forms a layer with 1 mm...

5. a) On a plant floor, ethanol has spilt and forms a layer with 1 mm thickness. If we assume that the rate of evaporation of the ethanol is controlled by the rate of diffusion of ethanol through a stagnant film of air with 5 mm thickness, calculate the time needed for the evaporation of all the ethanol. Derive any equations you use The temperature is 20 °C and the pressure is 760 mmHg. 115] b) State all the assumptions...