Homework Answers
Add Answer to:
please answer the following with all explanations included:
Question 1 (25 points): The no-load voltage of...
QUESTION 1 A) (10 marks) A 10 kW, 250 V DC self-excited shunt generator, with an...
QUESTION 1 A) (10 marks) A 10 kW, 250 V DC self-excited shunt generator, with an armature resistance of 0.1 ohm, is delivering 80 % of rated power to the mains at rated voltage when being run at 1000 r.p.m. (revolutions per minute). The field circuit resistance is 220 ohms. The brush contact drop is 0.5 V and rotational (mechanical) losses are 750 W Calculate The induced voltage The electromagnetic torque developed The shaft torque The overall efficiency B) (15...
please answer 13.16 at rated load of unity power factor and rated terminal voltage, determine efficienc...
please answer 13.16
at rated load of unity power factor and rated terminal voltage, determine efficienc including field rheostat loss. Ans. 93.139 13.11 A generator under test is rated at 100 KVA, 3-phase, 60-Hz; 2,400 volts. (a) If driven b a de motor unexcited, the motor output is 1.26 KW. (b) If driven by a de motor, generato on open circuit and excited to generate rated potential, the motor output is 2.5 KW. ( Ifdriven by a de motor, generator...
part (b) Q5. The magnetization curve for a shunt DC generator is shown in Figure Q5-1.The...
part (b)
Q5. The magnetization curve for a shunt DC generator is shown in Figure Q5-1.The generator is rated at 6 kW, 120 V, 50 A, and 1800 r/min and is shown in Figure Q5-2. Its field circuit is rated at 5A Figure Q5-1 The following data are known about the machine: 11r 0.180 120 V R, 24 Ω R.-0.18Ω -0 to 30 2 NF #1000 turns per pole v, Figure Q5-2 The shunt field resistor Radj is adjusted to...
Question 8 10 points Save Answer A DC generator has a no-load output voltage of 133...
Question 8 10 points Save Answer A DC generator has a no-load output voltage of 133 V. its armature circuit resistance is 0.943 ohm and its field coils are separately energized. If the load is rated 3.42 kW at 103.1 V. Neglecting the effect of armature reaction, what power could be delivered to the load?
1. A 300 V compound motor has armature resistance 0.18 Ω, series field resistance 0.3 Ω...
1. A 300 V compound motor has armature resistance 0.18 Ω, series field resistance 0.3 Ω and shunt field resistance 100 Ω. The rotational losses are 200 W. On full load the line current is 25 A and the motor runs at 1800 rpm. Determine: (i) the developed mechanical power (ii) the output power (iii) the output torque (iv) the efficiency at full load 2. A 120 V series motor has 0.2 Ω field resistance. On full load, the line...
A 25 Ω load is connected to the terminals of a 400 V terminal voltage parallel...
A 25 Ω load is connected to the terminals of a 400 V terminal voltage parallel excited DC generator. The resistance of the field circuit is 200 Ω, the resistance of the armature is 0,4 Ω, the efficiency is 82%, the speed is 1000 r/min. Draw the equivalent circuit of the generator. Calculate the induced emf, the torque and the magnetic losses if the mechanical losses is 200 W.
A) The input current to a 220 V, short-shunt compound motor at no load is 6 A. The shunt- field c...
a) The input current to a 220 V, short-shunt compound motor at no load is 6 A. The shunt- field circuit resistance is 220 Ω; the armature resistance is 0.112, and the series-field resistance is 0.1 Ω, what is the stray power loss ? (b) Assume the input rating of the motor in Part (a) to be 66 A at 220 V with a no-load speed of 1000 rpm. If the stray power loss varies as the counter-electromotive force and...
4. A separately excited de generator is rated at 172 kW, 430 V, 400 A, and...
4. A separately excited de generator is rated at 172 kW, 430 V, 400 A, and 1800 rpm. Its field circuit has a total resistance Radi +Rp. Its magnetizing curve is shown in Fig. P4.1. The machine has the following characteristics: RA = 0.05 2; Rr = 20 2; Radi (a) Draw the schematic diagram of the generator. (b) If the variable resistor Radi in this generator's field circuit is adjusted to 63 2 and the generator's =0 to 300...
electrical machines and power course. please answer the question including all parts (1), (2), (3) An...
electrical machines and power course. please answer
the question including all parts (1), (2), (3)
An eight-pole, 25-kW, 120-V dc generator has a duplex lap-wound armature which has 64 coils with 10 turns per coil. Its rated speed is 3600 rpm. 1. How much flux per pole is required to produce the rated voltage in this generator at no-load conditions? 2. What is the current per path in the armature of this generator at the rated load? 3. What is...
An eight-pole, 25-kW, 120-V de generator has a duplex lap-wound armature which has 64 coils with...
An eight-pole, 25-kW, 120-V de generator has a duplex lap-wound armature which has 64 coils with 10 turns per coil. Its rated speed is 3600 rpm. 1. How much flux per pole is required to produce the rated voltage in this generator at no-load conditions? 2. What is the current per path in the armature of this generator at the rated load? 3. What is the induced torque in this machine at the rated load?
QUESTION 1 A) (10 marks) A 10 kW, 250 V DC self-excited shunt generator, with an armature resistance of 0.1 ohm, is delivering 80 % of rated power to the mains at rated voltage when being run at 1000 r.p.m. (revolutions per minute). The field circuit resistance is 220 ohms. The brush contact drop is 0.5 V and rotational (mechanical) losses are 750 W Calculate The induced voltage The electromagnetic torque developed The shaft torque The overall efficiency B) (15...
please answer 13.16
at rated load of unity power factor and rated terminal voltage, determine efficienc including field rheostat loss. Ans. 93.139 13.11 A generator under test is rated at 100 KVA, 3-phase, 60-Hz; 2,400 volts. (a) If driven b a de motor unexcited, the motor output is 1.26 KW. (b) If driven by a de motor, generato on open circuit and excited to generate rated potential, the motor output is 2.5 KW. ( Ifdriven by a de motor, generator...
part (b)
Q5. The magnetization curve for a shunt DC generator is shown in Figure Q5-1.The generator is rated at 6 kW, 120 V, 50 A, and 1800 r/min and is shown in Figure Q5-2. Its field circuit is rated at 5A Figure Q5-1 The following data are known about the machine: 11r 0.180 120 V R, 24 Ω R.-0.18Ω -0 to 30 2 NF #1000 turns per pole v, Figure Q5-2 The shunt field resistor Radj is adjusted to...
Question 8 10 points Save Answer A DC generator has a no-load output voltage of 133 V. its armature circuit resistance is 0.943 ohm and its field coils are separately energized. If the load is rated 3.42 kW at 103.1 V. Neglecting the effect of armature reaction, what power could be delivered to the load?
a) The input current to a 220 V, short-shunt compound motor at no load is 6 A. The shunt- field circuit resistance is 220 Ω; the armature resistance is 0.112, and the series-field resistance is 0.1 Ω, what is the stray power loss ? (b) Assume the input rating of the motor in Part (a) to be 66 A at 220 V with a no-load speed of 1000 rpm. If the stray power loss varies as the counter-electromotive force and...
4. A separately excited de generator is rated at 172 kW, 430 V, 400 A, and 1800 rpm. Its field circuit has a total resistance Radi +Rp. Its magnetizing curve is shown in Fig. P4.1. The machine has the following characteristics: RA = 0.05 2; Rr = 20 2; Radi (a) Draw the schematic diagram of the generator. (b) If the variable resistor Radi in this generator's field circuit is adjusted to 63 2 and the generator's =0 to 300...
electrical machines and power course. please answer
the question including all parts (1), (2), (3)
An eight-pole, 25-kW, 120-V dc generator has a duplex lap-wound armature which has 64 coils with 10 turns per coil. Its rated speed is 3600 rpm. 1. How much flux per pole is required to produce the rated voltage in this generator at no-load conditions? 2. What is the current per path in the armature of this generator at the rated load? 3. What is...
An eight-pole, 25-kW, 120-V de generator has a duplex lap-wound armature which has 64 coils with 10 turns per coil. Its rated speed is 3600 rpm. 1. How much flux per pole is required to produce the rated voltage in this generator at no-load conditions? 2. What is the current per path in the armature of this generator at the rated load? 3. What is the induced torque in this machine at the rated load?
Most questions answered within 3 hours.
-
Developmental biology
A mouse contains a mutation that results in a failure of their
long
bones...
asked 3 minutes ago -
Alice has the RSA public key (n, e) = (11413, 251) and private
key d =...
asked 3 minutes ago -
QUESTION 5
A drug or medicine can reach the brain more effectively by
placing the drug...
asked 7 minutes ago -
Rammazzotti, Inc., is looking for feedback on company
performance. The company compares the budget for the...
asked 8 minutes ago -
A manufacturer of chocolate chips would like to know whether its
bag filling machine works correctly...
asked 17 minutes ago -
Consider the student registration business process at
your college:
1.)Describe the steps necessary for you to...
asked 24 minutes ago -
when released from rest at point A, an unknown ion moves to
point B. At point...
asked 16 minutes ago -
A stock is expected to pay the following dividends: $1.1
four years from now, $1.4 five...
asked 21 minutes ago -
G=yellow and g=green pea seeds. You cross a heterozygous
yellow-seeded plant with a green-seeded plant to...
asked 24 minutes ago -
Current Balance Experiment
a) When there is no current flowing through the electromagnet
coil, is there...
asked 23 minutes ago -
In Visual Basic 2017, Write a complete Main method that prints
Hello, world to the screen....
asked 39 minutes ago -
a) Find the pressure difference on an airplane wing if air flows
over the upper surface...
asked 45 minutes ago