3 phase AC power 3 phase AC motor A 3-phase motor is connected as shown above....
A 3 phase Y connected AC motor operates on 460V, line voltage, and draws 10.0 amps, line current. If the motor produces 10.0 hp at 3500 RPM, answer the following: a. What is the motor efficiency? b. How much power is lost to heat? c. What is the running torque of the motor?
A 3-phase Y-connected motor is connected to a three phase Y-connected source with 440V line voltage. It draws a line current of 5A from the source. If the power factor of the motor is 0.8, calculate Active power and Reactive power absorbed by the load Total Apparent power
Problem 3: Consider an 6 pole 3-phase AC induction motor being driven at 60 Hz a) b) c) d) When connected to a load, the motor outputs 2 kW of power assuming negligible rotational losses while rotating at a speed of 1070 rpm. What is the slip? (5 points) When connected to a load, the motor outputs 2 kW of power assuming negligible rotational losses while rotating at a speed of 1070 rpm. What is the developed torque? (5 points)...
If a 120 V (rms) AC power supply is connected to a 200 W motor. a)Calculate and explain whether or not the rms current of the circuit will be the same if the system is connected to a 14.0Ω resistor. (I need a clear explanation in b)) b)Calculate and explain whether or not the rms voltage drop across the motor is the same when there is no resistor, but the internal resistance of the wires of the circuit is 14.0Ω.
1)What will happen to your motor when power is applied if springs twice as stiff are used on the centrifugal switch? 2)If the running winding and the auxiliary winding were connected in series, would the motor turn? Explain 3)Does the speed of a split-phase motor change appreciably with a change in the applied voltage?
A 2 pole ac induction motor operates on a 480 V three phase power system. The motor is rated a 50 hp and 460 V with a full load shaft speed of 3400 rpm. The motor currently operates a 3510 rpm. determine the mechanical power the motor develops in hp using the slip method.
A 2 pole ac induction motor operates on a 480 V three phase power system. The motor is rated a 50 hp and 460 V with...
2.3 (20 points) A separately-excited de motor is mechanically coupled to a three-phase, 4-pole, 30-kVA, 460-V, round-rotor synchronous generator. The de motor is connected to a constant 230-V de supply The ac generator is connected to a 460 V, fixed-voltage, fixed-frequency, three-phase supply. The synchronous reactance of the synchronous generator is 513 Ω/phase. The armature resistance of the de motor is 30 m2. The 4-pole de machine is rated 30 kW at 230 V. All unspecified losses are to be...
A 3-phase, 600 kVA, 600 V, 60 Hz, 16 pole, Y-connected, round rotor synchronous motor has Xs = 0.492 22 and a negligible armature resistance. The motor is supplied from a 589V infinity bus, and draws 520 kW of real power at a 0.9 leading power factor. Its mechanical loss at the synchronous speed is 20 kW and the core loss is 15 kW. a) [7 marks] Calculate the generated voltage Ef , the load angel 8, and the efficiency...
give a circuit diagram of a electric motor connected to a 120 V AC supply through a switch, with an ammeter and a voltmeter connected to the circuit to measure current, voltage and measure power. Will it be possible to calculate the power with the measurement of voltage and current? How can you enable the measurement of power by adding additional measuring instrument?
3. A controlled single-phase fiull-wave controlled rectifier is connected in a de motor drive in Figure 4. The de motor armature inductance can be assumed large enough such that any motor curent ripple is negligible. (a) Assuming negligible supply reactance, show that the average rectifier output voltage V, in tems of the supply ms voltage E and the firing angle a, is given by 2/2E (6 marks) cos a _ (b) Given that the supply voltage is 230V, 50HZ and...