A 2 pole ac induction motor operates on a 480 V three phase power system. The...
Three-phase induction motor The three-phase induction motor nameplate gives the following information: 100 HP, 6 poles, 600 V, 60 Hz, PF =0.87. Rated motor slip s=0.0275 and rated motor current is 91.7 A. Measured at rated speed friction and ventilation losses are 1100 W. Measured between two motor terminals resistance is 0.305 Ω. f) For a load such where the motor rotates at the speed of 1180 r / min, determine shaft torque and calculate the mechanical power in HP,...
Please solve this question. Thank you. A two-pole, 75kW, 440 V, 50 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters, in Ω/phase referred to the stator: R1-0.075, XI 0.17, xm-72, R2-0.065 and X-0.17. Its rated slip is 4%. Assume that the mechanical losses are 1 kW and the core losses are 1.1 kW. Compute: a. The rated input current b. The rated power factor. c. The pullout torque d. The induced and load torques at rated conditions....
1. A six pole, 240V, 50 Hz three phase squirrel-cage induction motor has a no-load speed of 103 rad/s and a speed regulation of 5% at rated load. Find the amount of slip (in rpm) at full load for this motor. 2.. A 2 HP, 240 VAC, 60 Hz, capacitor-start motor is 75% efficient and draws 10 A at full load. What is this motor's power factor at rated load? 3. A wound rotor, 3 phase induction motor in Mr....
1. A 20 hp, 230 V, 60 Hz, four-pole, three-phase induction motor operating at rated load has rotor copper loss of 331 W, and a combined friction, windage, and stray power loss of 249 W. Determine, (a) Mechanical power developed; (b) Air-gap power; (c) Shaft speed; (d) Shaft torque (10 pts.)
A 5 hp, 4-pole, 50 Hz, three phase induction motor. If the full-load speed is 1300 rpm, calculate the slip rpm 250 200 300 2 1 1 HTML
A 4 phase, 460 V, 60 Hz, 26.8 hp, 4 pole, Y-connected induction motor draws 25 A at a power factor of 0.9 lagging. Core loss is 900 W, stator copper loss is 1100W, friction and winding losses are 300 W, and stray loss is neglected. The machine shaft rotates at 1738 rpm. Calculate the air gap power and output load torque - [Induction Motor - 15 points) A three-phase, 460 V, 60 Hz, 26.8 hp, 4-pole, Y-connected induction motor...
6. [Induction Motor - 15 points] A three-phase, 460 V, 60 Hz, 26.8 hp, 4-pole, Y-connected induction motor draws 25 A at a power factor of 0.9 lagging. The core loss is 900 W, stator copper loss is 1100 W, friction and windage loss is 300 W, and stray loss is neglected. The machine shaft rotates at a speed of 1738 rpm. Calculate the air gap power and output load torque.
1. A 15 hp, 4 pole, 208 V, 60 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters in Ω/phase referred to the stator: R,-0.220, Xi = 0.430, X,-15.0, R2 0.130 and X2-0.430. Mechanical and core losses amount to 300 W and 200 W respectively for rated voltage. (a) The motor is fed with a 60 Hz, 208 V voltage. It runs with a slip of 4.5 %. Find the speed, shaft torque and power, efficiency and power...
A three phase, 60 Hz, 4-pole, Y-connected, 460 V induction motor has the following values: R1=0.54 Ohm R2=0.5 Ohm Xm=51.10 Ohm X1 =2.09 X2=3.21 Ohm It operates with a slip of 0.02 rated input voltage with mechanical losses of 150 W, core loss of 150 W, and stray losses of 50 W. Find the Line current magnitude and the load torque.
8) The motor model for a 3-phase 480V 1750 RPM induction motor is shown below. Stray losses are 1000W. Assuming it is running at full rated load in the United States, find: 0.01 j0.14 j0.14 0 _ 0.01 A 19 j16 30.01/18 ) Synchronous Speed= RPM Number of poles= Poles Slip= Stator current iz = Amps Rotor current lz= Amps Magnetization currently = Amps Watts HP Volts Power across the air gap= h) 3-phase shaft (brake) horsepower= Terminal Voltage "V"=...