Three-phase induction motor
The three-phase induction motor nameplate gives the following
information: 100 HP,
6 poles, 600 V, 60 Hz, PF =0.87. Rated motor slip s=0.0275 and
rated motor current is 91.7 A. Measured at rated speed friction and
ventilation losses are 1100 W. Measured between two motor terminals
resistance is 0.305 Ω.
f) For a load such where the motor rotates at the speed of 1180 r /
min, determine shaft torque and calculate the mechanical power in
HP, supplied to this load (4 points).
g) Determine the required supply voltage, the rotational speed and
the mechanical power supplied to the load (HP) if the motor is fed
at 30 Hz frequency so that it develops the torque calculated in f
(5 points).
Three-phase induction motor The three-phase induction motor nameplate gives the following informa...
A 2 pole ac induction motor operates on a 480 V three phase power system. The motor is rated a 50 hp and 460 V with a full load shaft speed of 3400 rpm. The motor currently operates a 3510 rpm. determine the mechanical power the motor develops in hp using the slip method. A 2 pole ac induction motor operates on a 480 V three phase power system. The motor is rated a 50 hp and 460 V with...
The three-phase wye-connected induction motor nameplate gives the following information: 400 V, 1755 rpm, 60 Hz. Rotor speed at no-load is 1799 rpm. At rated voltage and frequency motor core losses are 400 W. At rated rotor speed, mechanical losses are 400 W. The available parameters of the motor conventional equivalent circuit (6-parameters IEEE model) are: R1 = 0.2 Ω, R’2 = 0.2 Ω, X1 = 0.5 Ω, X’2 = 0.2 Ω and Xφ = 20.0 Ω. In all calculations,...
1. A 15 hp, 4 pole, 208 V, 60 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters in Ω/phase referred to the stator: R,-0.220, Xi = 0.430, X,-15.0, R2 0.130 and X2-0.430. Mechanical and core losses amount to 300 W and 200 W respectively for rated voltage. (a) The motor is fed with a 60 Hz, 208 V voltage. It runs with a slip of 4.5 %. Find the speed, shaft torque and power, efficiency and power...
1. A six pole, 240V, 50 Hz three phase squirrel-cage induction motor has a no-load speed of 103 rad/s and a speed regulation of 5% at rated load. Find the amount of slip (in rpm) at full load for this motor. 2.. A 2 HP, 240 VAC, 60 Hz, capacitor-start motor is 75% efficient and draws 10 A at full load. What is this motor's power factor at rated load? 3. A wound rotor, 3 phase induction motor in Mr....
A 10 hp, 60 Hz, three-phase induction motor is delivering rated power while running at 864 rpm. The motor is drawing power from a 208 V, three-phase source. DC tests determine: R1 0.2 ? and R2-0.15 ?, we do not know XI and X2. Ignore XM. The rotational and core losses are 200 W and 100 W respectively. Find: a) The output (shaft torque). b) The number of poles. c) The input power and efficiency d) The power factor at...
Please solve this question. Thank you. A two-pole, 75kW, 440 V, 50 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters, in Ω/phase referred to the stator: R1-0.075, XI 0.17, xm-72, R2-0.065 and X-0.17. Its rated slip is 4%. Assume that the mechanical losses are 1 kW and the core losses are 1.1 kW. Compute: a. The rated input current b. The rated power factor. c. The pullout torque d. The induced and load torques at rated conditions....
1. A 20 hp, 230 V, 60 Hz, four-pole, three-phase induction motor operating at rated load has rotor copper loss of 331 W, and a combined friction, windage, and stray power loss of 249 W. Determine, (a) Mechanical power developed; (b) Air-gap power; (c) Shaft speed; (d) Shaft torque (10 pts.)
A three phase, 60 Hz induction motor rated at 440 V and 40 hp drives a load at 1710 rpm. The induction motor has the following impedances referred to the stator in /phase: R,=0.1512, X,=0.7512; R2=1.222,X=0.7522; X=25 12 . The core loss is 450 W and friction and windage loss is 250 W. Calculate the following 1. line current and power factor 2. Real and reactive input power 3. Air-gap power 4. Mechanical power and torque developed 5. shaft horse...
A. A three-phase ac induction motor drives a mechanical load. The motor's terminal voltage is 470V, 60 Hz. The motor's line current is 175 A, and the power factor is 0.85 lagging The motor's output power is 140 hp and the motor rotates at a speed of 1735 rpm. The motor's copper and core losses total 8.5 kW combined 1. Determine the number of poles of this motor 2. Determine the motor's shaft torque (N-m). 3. Determine the motor's rotational...
A 50-KW, 220V, 50 Hz, squirrel-cage three-phase induction motor is needed to rotate a mine conveyor belt drive. The motor starts sometimes under load, but most of the time is needed to run at rated speed and slip of 3.5%. (a) Propose an appropriate design of this drive motor in order to suit the application. Motivate and then illustrate your design with suitable drawings and speed (slip)-torque graphs. [12] (b) If the supply voltage of the motor in (a) above...