Design a second-order Butterworth low-pass filter with a DC gain of 0 dB and a -3 dB frequency of 5.24 kHz. (include circuit design w/ component values)
Design a second-order Butterworth low-pass filter with a DC gain of 0 dB and a -3...
Design a second-order Butterworth low-pass filter to satisfy the specifications a. The dc gain is unity (zero dB); b. The gain is no smaller than -1 dB for frequencies between 0 and 2,000 Hz; and c. The gain is no larger than -40 dB for frequencies larger than 40 kHz. Determine a circuit realization as a series RLC low-pass filter. Pick reasonable values of R, L, and C. Design a second-order Butterworth low-pass filter to satisfy the specifications a. The...
13.12 Design an active Butterworth low-pass filter with +16 dB in the dc limit, -40 dB at 20 kHz, and fo4 kHz.
Design a low-pass Butterworth filter of the lowest order possible that has a cutoff frequency of 100 kHz and a no more then -30 dB at 600kHz. Use as many 50Ω resistors as possible. Draw the circuit.
Design a -40 dB second order low pass active filter for a cut-off frequency of 3 kHz. You are free to choose the values of resistors and capacitors.
Design a fourth order low pass Butterworth filter with a cutoff frequency of 2 kHz and draw the frequency response for the filter.
Design a second order IIR Butterworth low pass digital filter with a cutoff frequency of 500 Hz and a sampling frequency of 10,000 Hz using bilinear transformation then find the following: The output (response) due to the following inputs: Sinusoidal signal with a frequency of 100Hz. Sinusoidal signal with a frequency of 500Hz. Sinusoidal signal with a frequency of 2000Hz. Repeat (a) above for a 6thorder Butterworth filter
9. Design a second-order Butterworth low-pass filter with a 0.01 ?F capacitor and a 10 knesstor that will remove any frequencies above 3 kHz. You may use other resistors, but you must use the specified capacitor and resistor (12 points).
Design a low-pass Butterworth filter which meet the specification as below: . Attenuation at least 18 dB at 3o i. Cut-off frequency is 150 kHz. Given th at magnitude function of nth order Butterworth is defined by Hj@) , where n positive integer, o,cut-off frequency 2Pm a) and the list of polynomials of Hen(s) up to n-6 as shown in Table 1 Polynomial 2 (2 +1.414s t) 40.7654s 1 ( 1.8478s+1) 5 s l) +0.6180s1)(+1.6180s D) 60.5176s+ D +1.4142s+ (...
1. By using an analog filter with a Butterworth response of order 3, design a digital IIR low pass filter with 3-db cutoff frequency 2c 0.6TT a) b) c) Evaluate the transfer function of the analog filter (10marks) Skecth the block diagram of transfer function (5 marks) Plot the magnitude response of the filters. (5marks) 1. By using an analog filter with a Butterworth response of order 3, design a digital IIR low pass filter with 3-db cutoff frequency 2c...
Problem 1 (25 Pts) Design a low pass multistage Butterworth filter that simultaneously meets the following design requirements: 1. Minimum attenuation of 24 dB at 1000 Hz and 2. Minimum attenuation of 48 dB at frequency of 2000 Hz or higher. Consider equal source and load impedances at 50 S2. Part a) 15 pts Solve for both the order of the Butterworth filter and the cut-off frequency required to meet the above design criteria. Part b) 10 pts Find the...