A horizontal uninsulated steam pipe passes through a large room whose walls and ambient air are at 300 K. The pipe of 125-mm diameter has an emissivity of 0.85 and an outer surface temperature of 373 K. Calculate the rate of heat loss per unit length from the pipe.
The answer should be close to 45.2 W/m
Please show all work clearly
A horizontal uninsulated steam pipe passes through a large room whose walls and ambient air are...
HELP MEEE An uninsulated steam pipe passes through a room where the temperatures of the air and its walls are 38 degrees. The outer diameter of the pipe is 90 mm, the temperature and spreading rate of its surface are 200 degrees and 0.8, respectively. Calculate the radiating power of the surface and the radiation to the surface. Since the heat transfer coefficient with natural convection from the surface to the air is 25 w/m^2.K, what is the heat loss...
8. An uninsulated steam pipe is used to transport high-temperature steam from one build- ing to another. The pipe is 0.5 m in diameter, has a surface temperature of 150°C, and is exposed to ambient air at -10°C. The air moves in cross flow over the pipe with a velocity of 5 m/s. What is the rate of heat loss per unit length of pipe?
Problem 9.43 The 4 m x 4 m horizontal roof of an uninsulated aluminum melting furnace is comprised of a 0.08-m-thick fireclay brick refractory covered by a 5-mm-thick steel (AISI 1010) plate. The refractory surface exposed to the furnace gases is maintained at 1700 K during operation, while the outer surface of the steel is exposed to the air and walls of a large room at 25 0C. the emissivity of the steel is 0.3. (a) What is...
on of a horizontal water pipe shown in the figure is passing through a large room. The walls of interpolate properties. 1 in the room are at the same temperature as the air. You do not need to 0.0254 m, σ-5.67x 108 W/(m2 K4) Pipe т,-65°C Air T-22 C D= 6cm L 393.6 inches (4 pts) Calculate the Rayleigh Number (Ra) for this configuration. Check your answers, no partial credit on this problem. a. (4 pts) If the free convection...
Calculate the heat losses that are transferred to the open air of 1m from an uninsulated pipe with diameter d1 (inner diameter = 150 mm) and d2 (outer diameter = 165 mm) when water with an average temperature T1 runs through it. = 90 ° C and the ambient temperature Ta = -15 ° C. The coefficient of thermal conductivity of the tube material is K = 50 W / m ° C. The heat transfer coefficient for water and...
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate per unit length of the tube due to free convection. 2) Air at -10°C flows at 10 m/s over the roof plate of two 5m length rooms whose air is at Too-200C. The roof plate is 0.20-m thick concrete (k = 0.6 w/ m. K)....
“A pipe is carrying hot water through a cold storage facility. The ambient air in the cold storage has temperature of ?5?C. To maintain uniform temperature in the cold storage, blowers installed in the facility induce a 3 m/s velocity to the cold air (which can be assumed to be flowing across the water pipe). Hot water inside the pipe has a mean velocity of 0.5 m/s. The internal and exter- nal diameter of the pipe are 8.4 cm and...
A 70-mm diameter hot solid rod is suspended in a room in which the air and walls are at 25°C., The surface temperature of the rod and its emissivity are 200°C and 0.8, respectively. The associated coefficient of convective heat transfer from the rod surface to the air is 15 W/m2.K. If the total heat loss from the surface area of the rod is estimated to be 947 W, what is the length of the rod? Area of both sides of the...
3. CIN: A 50 m long section of a steam pipe at 15°C. The average temperature of the outer surface of combined heat transfer coefficient or the rate of heat loss from the steam plp generated in an natural gas furnance $0.52/therm (1 therm = 105, 0.035 W/mK) needed in order to say remain constant at 150°C. (10 marks) For a steam pipe whose outer diameter is 10 cm passes through an open space mperature of the outer surface of...
a 0.4 m diameter, thin walled steel pipe is used to transport saturated steam Problem 3.049 A 0.4-m-diameter, thin-walled steel pipe is used to transport saturated steam at a pressure of 20 bars in a room for which the air temperature is 25°C and the convection heat transfer coefficient at the outer surface of the pipe is 20 W/m2-K. (a) What is the heat loss per unit length from the bare pipe (no insulation)? (b) Estimate the heat loss per...