Homework Answers
Add Answer to:
4. Mixed-Mode Heat Transfer - A transistor capsule is roughly spherical with a 1 cm diameter,...
1. Heat transfer analysis of a special-purpose panel is to be performed. The temperatures at the...
1. Heat transfer analysis of a special-purpose panel is to be performed. The temperatures at the inner and outer surfaces of the panel measure 30°C and 22°C, respectively. The dimension of the panel is 2.9 m wide, 1.3 m high and 0.40 cm thick. Its thermal conductivity is 0.13 W/m·°C. Heat is lost from the outer surface by convection and radiation. The convective heat transfer coefficient is 23 W/m2 ·°C and an ambient temperature measures 13°C. Determine (a) the fraction...
(Chap 3- Heat conduction in cylinders and spheres) An 8-m-internal diameter spherical tank made of 1.5-cm-thick...
(Chap 3- Heat conduction in cylinders and spheres) An 8-m-internal diameter spherical tank made of 1.5-cm-thick stainless steel (k = 15W/m-K) is used to store iced water at 0°C. The tank is located in a room whose temperature is 25°C. The walls of the room are also at 25°C. The outer surface of the tank is black (emissivity1), and heat transfer between the outer surface of the tank and the surroundings is by natural convection and radiation. The convection heat...
(13) A brewery fermentation tank 12 m in diameter is situated in a room, which has...
(13) A brewery fermentation tank 12 m in diameter is situated in a room, which has a temperature of 15°C. The tank is constructed of 10-mm welded steel plate with 12-mm glass lining. The temperature at the inner surface of the glass lining is 50°C. Assume that the convective resistance offered by the air film on the outside of the tank equals the combined resistance of the glass and steel. The thermal conductivity of glass is 0.80 W/mK and that...
Question 1: Identify the classification of the following heat transfer (convective flow) problems: *Note that there...
Question 1: Identify the classification of the following heat transfer (convective flow) problems: *Note that there may be other modes of heat transfer present (e.g. radiation or conduction), but ignore those effects. For example, a hot ball bearing being dropped from a building roof. Ans. Forced, external convection over a sphere. a. Water flow through a fire hose from a hydrant. b. Heat transfer from a clothes iron sitting on an ironing board. c. Heat transfer from a climber trapped...
1. (10 points) A spherical thermocouple junction 1 mm in diameter is inserted in a combustion...
1. (10 points) A spherical thermocouple junction 1 mm in diameter is inserted in a combustion chamber to measure the temperature of the products of combustion. The hot gases are at 1000 K and have a velocity of 5 m/s. The thermocouple junction has an emissivity of 50% and the cooled walls of the combustor are at 500 K. The properties of the thermocouple junction are: p = 9000 kg/m”, Cp = 500 J/kg:K, k = 100 W/mK. The properties...
1) 2) 3) PROJECT #1 (2.5 Marks): The heat that is conducted through a body must...
1)
2)
3)
PROJECT #1 (2.5 Marks): The heat that is conducted through a body must frequently be removed by other heat transter processes. For example, the heat generated in an electronic device must be dissipated to the surroundings through convection by means of fins. Consider the one-dimensional aluminum fin (thickness t 3.0 mm, width Z 20 cm, length L) shown in Figure 1, that is exposed to a surrounding fluid at a temperature 1. The conductivity of the aluminum...
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate...
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate per unit length of the tube due to free convection. 2) Air at -10°C flows at 10 m/s over the roof plate of two 5m length rooms whose air is at Too-200C. The roof plate is 0.20-m thick concrete (k = 0.6 w/ m. K)....
Heat Transfer Problems 1. A window pane (1/8 inch thick) in an old house owned by...
Heat Transfer
Problems 1. A window pane (1/8 inch thick) in an old house owned by a professor is 3 ft. by 4 ft. He likes to be warm in the winter so the inside temperature is kept at 70 °F even when the outside temperature is 10 •F. For this problem assume the inside and outside temperatures are for the window surface. How much heat is transferred through the window (k=.54 BTU/hr ft ° F)? 2. A small heated...
A) Describe radiation and conduction as modes of heat transfer; what are the key differences betw...
a) Describe radiation and conduction as modes of heat transfer; what are the key differences between them? [41 b) You are thinking of installing an observation window to a walk in fridge wall. Compare the rate of heat transfer of the original fridge wall (no window) with the new one (with window). The original wall has an area of 8m2 and is composed of three layers in series, 0.3 cm steel, 3 cm cork for insulation and a 2.5 cm...
Question You are studying heat transfer through a spherical shell container with a thermal conductivity k....
Question You are studying heat transfer through a spherical shell container with a thermal conductivity k. The inner and outer radii are identified as a and b, respectively. The inside surface of the shell is exposed to a constant heat flux in the outward direction. The outside surface temperature of the container is measured at Note that only the variables values provided in the problem statement are known. Assume steady one-dimensional radial heat transfer a. Give the mathematical formulation of...
(Chap 3- Heat conduction in cylinders and spheres) An 8-m-internal diameter spherical tank made of 1.5-cm-thick stainless steel (k = 15W/m-K) is used to store iced water at 0°C. The tank is located in a room whose temperature is 25°C. The walls of the room are also at 25°C. The outer surface of the tank is black (emissivity1), and heat transfer between the outer surface of the tank and the surroundings is by natural convection and radiation. The convection heat...
(13) A brewery fermentation tank 12 m in diameter is situated in a room, which has a temperature of 15°C. The tank is constructed of 10-mm welded steel plate with 12-mm glass lining. The temperature at the inner surface of the glass lining is 50°C. Assume that the convective resistance offered by the air film on the outside of the tank equals the combined resistance of the glass and steel. The thermal conductivity of glass is 0.80 W/mK and that...
Question 1: Identify the classification of the following heat transfer (convective flow) problems: *Note that there may be other modes of heat transfer present (e.g. radiation or conduction), but ignore those effects. For example, a hot ball bearing being dropped from a building roof. Ans. Forced, external convection over a sphere. a. Water flow through a fire hose from a hydrant. b. Heat transfer from a clothes iron sitting on an ironing board. c. Heat transfer from a climber trapped...
1. (10 points) A spherical thermocouple junction 1 mm in diameter is inserted in a combustion chamber to measure the temperature of the products of combustion. The hot gases are at 1000 K and have a velocity of 5 m/s. The thermocouple junction has an emissivity of 50% and the cooled walls of the combustor are at 500 K. The properties of the thermocouple junction are: p = 9000 kg/m”, Cp = 500 J/kg:K, k = 100 W/mK. The properties...
1)
2)
3)
PROJECT #1 (2.5 Marks): The heat that is conducted through a body must frequently be removed by other heat transter processes. For example, the heat generated in an electronic device must be dissipated to the surroundings through convection by means of fins. Consider the one-dimensional aluminum fin (thickness t 3.0 mm, width Z 20 cm, length L) shown in Figure 1, that is exposed to a surrounding fluid at a temperature 1. The conductivity of the aluminum...
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate per unit length of the tube due to free convection. 2) Air at -10°C flows at 10 m/s over the roof plate of two 5m length rooms whose air is at Too-200C. The roof plate is 0.20-m thick concrete (k = 0.6 w/ m. K)....
Heat Transfer
Problems 1. A window pane (1/8 inch thick) in an old house owned by a professor is 3 ft. by 4 ft. He likes to be warm in the winter so the inside temperature is kept at 70 °F even when the outside temperature is 10 •F. For this problem assume the inside and outside temperatures are for the window surface. How much heat is transferred through the window (k=.54 BTU/hr ft ° F)? 2. A small heated...
a) Describe radiation and conduction as modes of heat transfer; what are the key differences between them? [41 b) You are thinking of installing an observation window to a walk in fridge wall. Compare the rate of heat transfer of the original fridge wall (no window) with the new one (with window). The original wall has an area of 8m2 and is composed of three layers in series, 0.3 cm steel, 3 cm cork for insulation and a 2.5 cm...
Question You are studying heat transfer through a spherical shell container with a thermal conductivity k. The inner and outer radii are identified as a and b, respectively. The inside surface of the shell is exposed to a constant heat flux in the outward direction. The outside surface temperature of the container is measured at Note that only the variables values provided in the problem statement are known. Assume steady one-dimensional radial heat transfer a. Give the mathematical formulation of...
Most questions answered within 3 hours.
-
A business executive has the option to invest money in two
plans: Plan A guarantees that...
asked 1 hour ago -
Hello, can someone please help me answer this question?
How much heat is absorbed by a...
asked 1 hour ago -
. A marketing researcher conducted a survey of 25 shoppers
randomly selected at the local mall...
asked 1 hour ago -
Create an comprehensive response to the
following:
Antimicrobial agents work on a multitude of microbes (bacteria,...
asked 1 hour ago -
6.13 LAB: Step counter. Section 6.3.
A pedometer treats walking 2,000 steps as walking 1 mile....
asked 1 hour ago -
(14.2) A block of mass m = 10 kg riding on a frictionless
horizontal plane is...
asked 1 hour ago -
Use any search engine to search for articles about Starbucks
partnership with Tata Companies in India...
asked 1 hour ago -
Let’s say that for some reason Bank Excess Reserves suddenly
increase sharply. What effect would this...
asked 1 hour ago -
Given:
Curent Assets: $600,000
Total Assets: $2,600,000
Current Liabilities: $500,000
Total Liabilities: $1,700,000
What is the...
asked 1 hour ago -
1. What is a “Bankster”? What is insider trading? Why is it
illegal?
2. What is...
asked 1 hour ago -
A transverse wave on a cord is given by
D(x,t)=0.18sin(2.7x−61.0t), where Dand x are in m...
asked 1 hour ago -
ASSIGNMENT
ANSWER ANY TWO OF THE FOLLOWING IN 2-3 PARAGRAPHS OF EACH
QUESTION.
1: Where is...
asked 1 hour ago