A closed rectangular tank 5m high, 3m in width and 6m in length is filled with 3.5m of water. If it is accelerated at 18m/s^2 determine the force experience at the both sides of the tank.
A closed rectangular tank 5m high, 3m in width and 6m in length is filled with...
4. A rectangular tank water (width 14.0m, length 14.0m, and height 20 m) is filled with water and open to the atmosphere. The water level in the tank is 1 m below the top of the tank. This tank sits upon a platform of height h. If the water tank is plugged at the bottom so no water is flowing, what is the resultant force exerted by the water on the bottom face of the container? What is the resultant...
a closed horizontal cylindrical tank 1.5m in diameter and 4 m long and filled with a gasoline, of specific gravity 0.2 and accelerated horizontally at 3m/s2, find the total force acting on the front wall and rear wall
.Emergency Coolant Injection from an Accumulator Tank (8 marks) Consider an accumulator tank with a cross sectional area of A,-10m, and a height of H-6m, initially filled with 5m of water as shown in the figure. The top of the tank is closed and filled with air at an initial pressure of P, 1,101 kPa At time -Os, the water starts to discharge from an opening at the bottom of the tank with an opening area of A2 0.001m2. The...
y is the original height of the cylinder
0 The water tank is shown below. It is partially filled with water ydiagram not to scae Length Height Width (d) Calculate the value of y when x 2.4m (e) State what the value of x and the value of y represent for this water (0 Find the value of x when the height of water in the tank is 0.9m. The water tank has a length of 5m. (B) When the...
Find the torque required to hold gate closed. Tank contains
water. Width of rectangular gate is 1 m.
atm Surface atm 8 m gate 1 m Y. 1 m pivot
An empty tank rectangular in plan (with all sides closed) is 12.5 its cross section 0.70 m width x 0.60 m height. If the sheet m N/ma of the surface, and the tank is allowed to float in fresh water (Sa weight 9.81 KN/m) with the 0.60m wedge vertical. Show, whether the ta stable or not?
6) An open top, rectangular tank has sides both equal to 5.0 m and a height of 7.0 m. Initially, it is completely filled with water. A pump removes water from the bottom of the tank at a flowrate (m'/s) of3.2 h?, where h is the height of the water level in meters. Determine the time needed for the water level to drop from 7.0 meters to 3.5 meters. (2 pts)
Q2/ This rectangular gate (3m high and 2m width) shown in Fig.2 below will open automatically when the depth of water (d) becomes large enough. What is the minimum depth that will cause the gate to open? d Pivot 3 mx 2 m) 1.35 m * 1.2 m
A closed tank is filled with water and has a 4-ft-diameter
hemispherical dome as shown in the figure below. A U-tube manometer
is connected to the tank. Determine the vertical force of the water
on the dome if the differential manometer reading is 7 ft and the
air pressure at the upper end of the manometer is 13.6 psi.
Setting up the manometer equation, I found the pressure in the
closed tank to be 2894.4 lb/ft^2, but when doing the...
A closed tank is filled with water and has a 4-ft-diameter
hemispherical dome as shown in Fig. P2.129. A U-tube manometer is
connected to the tank. Determine the vertical force of the water on
the dome if the differential manometer reading is 7 ft and the air
pressure at the upper end of the manometer is 13.4 psi.